Add touch_probe and touch_reset actions to the Elecrow for a diagnosis over the API (0.2.97, firmware 0.2.83)

screen_manager/CHANGELOG.md

@@ -1,3 +1,10 @@
+## 0.2.97 (firmware 0.2.83)
+
+Two diagnostics for the Elecrow's touch bus, callable from Home Assistant.
+
+- **`touch_probe` and `touch_reset` on an Elecrow.** Two actions of the screen (Developer tools → Actions, `esphome.<screen>_touch_probe`): the probe logs the PCA9557's four registers and whether a GT911 answers at 0x5D or 0x14 (its product id); the reset runs Elecrow's sequence with values of one's own (the expander's configuration during the reset, its outputs while the reset is held and after, the two waits, the configuration afterwards) and probes again. For a unit whose touch stays silent, without a new build for every try.
+- Needs firmware 0.2.83 on an Elecrow: press **Update** on the screen. Elecrow firmware: 1,867,584 bytes, 91.9 % of its update slot.
+
 ## 0.2.96 (firmware 0.2.82)
 
 The Elecrow's touch chip reset the way Elecrow does it.

screen_manager/app/core.py

@@ -54,7 +54,7 @@ REFS = {'cyd': 'main', 'guition': 'main', 'elecrow': 'main'}
 # is the small one. The Elecrow CrowPanel 7.0" (app 0.2.93) is the Guition's kind at 800x480, without the Rotation.
 LARGE_BOARDS = ('guition', 'elecrow')
 # Firmware shipped with this app release; screens below it get an update offer.
-FIRMWARE_VERSION = '0.2.82'
+FIRMWARE_VERSION = '0.2.83'
 # The Auto standby switch a screen offers Home Assistant automations.
 AUTO_STANDBY_MIN_FIRMWARE = '0.2.41'
 # The settings page the screen opens itself, and the screen.settings tile that opens it.

screen_manager/config.yaml

@@ -1,5 +1,5 @@
 name: ESP Screen Manager
-version: "0.2.96"
+version: "0.2.97"
 slug: esp_screen_manager
 description: Choose tiles for your CYD and Guition touchscreen, without reflashing.
 url: https://gittea.trippedonmy.name/Xandrossian/homeassistant_espscreen