Bring the big climate card to the Guition, with fan and swing on their own card (0.2.47)
App 0.2.47 / firmware 0.2.40: - guition-4848s040.yaml gets the CYD's climate card: the setpoint between large -/+ keys (debounced, hold to repeat) and one row of mode keys in HA's order and colours; the arc, scrim, mode pill and climate_number font are gone. - Fan and swing modes sit right on the card as segmented rows behind their icons, drawn by the new climate_card.h (async rebuild, taps through the touch guard and a profile hook). The card is laid out per case from one table: no, one or two settings rows, with or without mode keys. - Both boards hide a mode key row that would hold a single mode and centre the setpoint instead. - Glyph arrow-oscillating (Home Assistant's swing icon) joins the icon set. Verified on the Guition over OTA with the owner's air conditioner and with host renders of both boards; see docs/TEST_RESULTS_0247.md. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This commit is contained in:
Max Gramser
+493
-292
@@ -1,7 +1,7 @@
|
||||
# Guition ESP32-S3-4848S040 / 4-inch EU wallbox, 480x480 IPS + GT911.
|
||||
# Use guition-device.yaml; see docs/GUITION.md. CYD hardware is a separate profile.
|
||||
substitutions:
|
||||
SCREEN_FIRMWARE_VERSION: "0.2.39"
|
||||
SCREEN_FIRMWARE_VERSION: "0.2.40"
|
||||
# 0: no drift limit; LVGL decides, releasing inside the tile is a tap, leaving it is not
|
||||
# (like iOS). The CYD keeps a limit because its resistive panel jumps.
|
||||
TOUCH_MOVE_LIMIT_PX: "0"
|
||||
@@ -694,6 +694,7 @@ esphome:
|
||||
light_controls::fallback.maximum = t.max_kelvin;
|
||||
id(active_climate_fan_modes) = t.fan_modes; id(active_climate_fan_mode) = t.fan_mode;
|
||||
id(active_climate_swing_modes) = t.swing_modes; id(active_climate_swing_mode) = t.swing_mode;
|
||||
id(active_climate_action) = t.hvac_action;
|
||||
id(open_value_overlay).execute(t.name, t.entity, t.domain(), "auto", t.active(), 0,
|
||||
t.brightness, t.percentage, t.position, runtime_tiles::icon_for(t),
|
||||
0xD5EEFC, 0x00A6ED, 0x1B1B1B, "Off", "On", t.modes,
|
||||
@@ -706,22 +707,17 @@ esphome:
|
||||
if (id(climate_edit_pending) && millis() - id(climate_edit_ms) < 3000) return;
|
||||
id(climate_edit_pending) = false;
|
||||
id(active_climate_mode) = t.state;
|
||||
id(active_climate_action) = t.hvac_action;
|
||||
id(active_climate_supported_modes) = t.hvac_modes;
|
||||
lv_label_set_text(id(climate_mode_label), tile_controls::climate_mode_text(t.state));
|
||||
id(climate_power_refresh).execute();
|
||||
id(active_climate_fan_modes) = t.fan_modes; id(active_climate_fan_mode) = t.fan_mode;
|
||||
id(active_climate_swing_modes) = t.swing_modes; id(active_climate_swing_mode) = t.swing_mode;
|
||||
char buf[72];
|
||||
if (std::isfinite(t.current)) snprintf(buf, sizeof(buf), "Now: %.1f°", t.current);
|
||||
else snprintf(buf, sizeof(buf), "Now: --");
|
||||
lv_label_set_text(id(climate_current_label), buf);
|
||||
id(active_climate_current) = t.current;
|
||||
id(active_climate_humidity) = std::isfinite(t.humidity) ? (int) lround(t.humidity) : -1;
|
||||
if (std::isfinite(t.target)) {
|
||||
int target = cyd::quantize_temperature(lround(t.target * 10), id(active_climate_min_x10), id(active_climate_max_x10), id(active_climate_step_x10));
|
||||
id(active_climate_target_x10) = target;
|
||||
snprintf(buf, sizeof(buf), "%.1f°", target / 10.0f);
|
||||
lv_label_set_text(id(climate_target_label), buf);
|
||||
lv_arc_set_value(id(climate_arc), target);
|
||||
id(active_climate_target_x10) = cyd::quantize_temperature(lround(t.target * 10), id(active_climate_min_x10), id(active_climate_max_x10), id(active_climate_step_x10));
|
||||
id(active_climate_target_known) = true;
|
||||
}
|
||||
id(climate_card_refresh).execute();
|
||||
}
|
||||
};
|
||||
- lambda: |-
|
||||
@@ -731,6 +727,13 @@ esphome:
|
||||
light_controls::commits[0] = [](int value) { id(set_light_hue).execute(value); };
|
||||
light_controls::commits[1] = [](int value) { id(set_light_color_temperature).execute(value); };
|
||||
light_controls::commits[2] = [](int value) { id(color_brightness_commit).execute(value); };
|
||||
climate_card::look.card = id(climate_settings_card);
|
||||
climate_card::look.font = id(label)->get_lv_font();
|
||||
climate_card::look.icon_font = id(materialdesign_icons_mini)->get_lv_font();
|
||||
climate_card::choose = [](char kind, int index) {
|
||||
if (kind == 'f') id(set_climate_fan_mode).execute(index);
|
||||
else id(set_climate_swing_mode).execute(index);
|
||||
};
|
||||
- light.turn_on:
|
||||
id: back_light
|
||||
brightness: !lambda "return screen_settings::current.brightness / 100.0f;"
|
||||
@@ -1109,12 +1112,29 @@ globals:
|
||||
type: std::string
|
||||
restore_value: no
|
||||
|
||||
# Room temperature (NAN when unknown), what the device does (hvac_action, runtime tiles only),
|
||||
# and whether Home Assistant reported a setpoint at all (heat_cool ranges do not).
|
||||
- id: active_climate_current
|
||||
type: float
|
||||
restore_value: no
|
||||
initial_value: 'NAN'
|
||||
|
||||
- id: active_climate_action
|
||||
type: std::string
|
||||
restore_value: no
|
||||
|
||||
- id: active_climate_target_known
|
||||
type: bool
|
||||
restore_value: no
|
||||
initial_value: 'false'
|
||||
|
||||
font:
|
||||
- file: "fonts/Roboto-700.ttf"
|
||||
id: climate_number
|
||||
size: 46
|
||||
# The climate card's setpoint, large enough to read across the room.
|
||||
- file: "fonts/Roboto-400.ttf"
|
||||
id: setpoint_digits
|
||||
size: 64
|
||||
bpp: 4
|
||||
glyphs: "0123456789.-° "
|
||||
glyphs: ['-','.','°','0','1','2','3','4','5','6','7','8','9']
|
||||
- file: "fonts/Roboto-500.ttf"
|
||||
id: time_label
|
||||
size: 27
|
||||
@@ -1363,6 +1383,7 @@ font:
|
||||
- "\U000F067F" # weather-snowy-rainy
|
||||
- "\U000F059B" # weather-sunset-down
|
||||
- "\U000F01D8" # dots-horizontal
|
||||
- "\U000F1C91" # arrow-oscillating
|
||||
|
||||
- file: 'fonts/materialdesignicons-webfont.ttf'
|
||||
id: materialdesign_icons_mini
|
||||
@@ -4059,13 +4080,17 @@ lvgl:
|
||||
|
||||
|
||||
# ---------- CLIMATE DETAIL OVERLAY ----------
|
||||
# The CYD's climate card at the Guition's size: nothing to drag. A setpoint card with big
|
||||
# -/+ keys (the number changes at once, one call goes out once the taps stop) and one row
|
||||
# of mode keys like Home Assistant's climate card; fan and swing stay in the picker behind
|
||||
# "more". A tap redraws only a label or a key, never a dial.
|
||||
- obj:
|
||||
id: climate_detail_overlay
|
||||
x: 0
|
||||
y: 0
|
||||
width: ${DISPLAY_W}
|
||||
height: ${DISPLAY_H}
|
||||
bg_color: 0xF7F7F7
|
||||
bg_color: 0xE7E7E7
|
||||
bg_opa: COVER
|
||||
hidden: true
|
||||
scrollable: false
|
||||
@@ -4076,27 +4101,6 @@ lvgl:
|
||||
pad_bottom: 0
|
||||
border_width: 0
|
||||
widgets:
|
||||
- obj:
|
||||
id: climate_detail_bg
|
||||
x: 0
|
||||
y: 0
|
||||
width: ${DISPLAY_W}
|
||||
height: ${DISPLAY_H}
|
||||
styles: style_bg_grad
|
||||
scrollable: false
|
||||
clickable: false
|
||||
- obj:
|
||||
id: climate_detail_scrim
|
||||
x: 0
|
||||
y: 0
|
||||
width: ${DISPLAY_W}
|
||||
height: ${DISPLAY_H}
|
||||
bg_color: 0xFFFFFF
|
||||
bg_opa: 62%
|
||||
border_width: 0
|
||||
clickable: false
|
||||
scrollable: false
|
||||
|
||||
- obj:
|
||||
id: climate_close_button
|
||||
align: TOP_LEFT
|
||||
@@ -4147,156 +4151,322 @@ lvgl:
|
||||
- label:
|
||||
id: climate_detail_title
|
||||
align: TOP_MID
|
||||
y: 35
|
||||
y: 30
|
||||
width: 300
|
||||
long_mode: DOT
|
||||
text_align: CENTER
|
||||
text: "Climate"
|
||||
styles: style_room
|
||||
|
||||
# What the device does (or its mode), the room temperature and humidity.
|
||||
- label:
|
||||
id: climate_current_label
|
||||
align: TOP_MID
|
||||
y: 84
|
||||
text: "Now: --"
|
||||
y: 92
|
||||
width: 94%
|
||||
long_mode: DOT
|
||||
text_align: CENTER
|
||||
text: "--"
|
||||
text_font: sublabel_big
|
||||
text_color: 0x1B1B1B
|
||||
text_opa: 85%
|
||||
text_color: 0x616161
|
||||
clickable: false
|
||||
|
||||
- arc:
|
||||
id: climate_arc
|
||||
align: CENTER
|
||||
y: 40
|
||||
width: 276
|
||||
height: 276
|
||||
# Without this the arc claims an invisible extra
|
||||
# click area outside the 184x184 box — near the close
|
||||
# button top-left this creates overlap.
|
||||
ext_click_area: 0
|
||||
start_angle: 135
|
||||
end_angle: 45
|
||||
min_value: 50
|
||||
max_value: 300
|
||||
value: 200
|
||||
adjustable: true
|
||||
arc_width: 30
|
||||
arc_rounded: true
|
||||
arc_color: 0xE5E5E5
|
||||
arc_opa: 80%
|
||||
- obj:
|
||||
id: climate_setpoint_card
|
||||
align: TOP_MID
|
||||
y: 136
|
||||
width: 94%
|
||||
height: 200
|
||||
radius: 24
|
||||
bg_color: 0xFFFFFF
|
||||
bg_opa: COVER
|
||||
border_width: 1
|
||||
border_color: 0xDDDDDD
|
||||
pad_all: 0
|
||||
clickable: false
|
||||
scrollable: false
|
||||
widgets:
|
||||
# Every clean tap counts (a quick triple tap is three steps); holding keeps stepping.
|
||||
- obj:
|
||||
id: climate_minus_button
|
||||
align: LEFT_MID
|
||||
x: 18
|
||||
width: 116
|
||||
height: 116
|
||||
radius: 58
|
||||
bg_color: 0xF1F1F1
|
||||
bg_opa: COVER
|
||||
border_width: 0
|
||||
pad_all: 0
|
||||
clickable: true
|
||||
scrollable: false
|
||||
pressed:
|
||||
bg_color: 0xD9D9D9
|
||||
disabled:
|
||||
opa: 40%
|
||||
on_short_click:
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return cyd::touch_guard.accept_repeat(millis(), 60);'
|
||||
then:
|
||||
- script.execute: { id: climate_adjust_target, direction: -1, held: false }
|
||||
on_long_press_repeat:
|
||||
- script.execute: { id: climate_adjust_target, direction: -1, held: true }
|
||||
widgets:
|
||||
- label:
|
||||
id: climate_minus_icon
|
||||
align: CENTER
|
||||
text: "\U000F0374"
|
||||
text_font: materialdesign_icons
|
||||
text_color: 0x1B1B1B
|
||||
clickable: false
|
||||
- obj:
|
||||
id: climate_plus_button
|
||||
align: RIGHT_MID
|
||||
x: -18
|
||||
width: 116
|
||||
height: 116
|
||||
radius: 58
|
||||
bg_color: 0xF1F1F1
|
||||
bg_opa: COVER
|
||||
border_width: 0
|
||||
pad_all: 0
|
||||
clickable: true
|
||||
scrollable: false
|
||||
pressed:
|
||||
bg_color: 0xD9D9D9
|
||||
disabled:
|
||||
opa: 40%
|
||||
on_short_click:
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return cyd::touch_guard.accept_repeat(millis(), 61);'
|
||||
then:
|
||||
- script.execute: { id: climate_adjust_target, direction: 1, held: false }
|
||||
on_long_press_repeat:
|
||||
- script.execute: { id: climate_adjust_target, direction: 1, held: true }
|
||||
widgets:
|
||||
- label:
|
||||
id: climate_plus_icon
|
||||
align: CENTER
|
||||
text: "\U000F0415"
|
||||
text_font: materialdesign_icons
|
||||
text_color: 0x1B1B1B
|
||||
clickable: false
|
||||
- label:
|
||||
id: climate_target_label
|
||||
align: CENTER
|
||||
y: -14
|
||||
text: "--"
|
||||
text_font: setpoint_digits
|
||||
text_color: 0x1B1B1B
|
||||
clickable: false
|
||||
- label:
|
||||
id: climate_set_label
|
||||
align: CENTER
|
||||
y: 46
|
||||
text: "Target"
|
||||
text_font: sublabel
|
||||
text_color: 0x6B6B6B
|
||||
clickable: false
|
||||
|
||||
# One key per mode the device supports (off is the power key); the one in use is
|
||||
# filled in Home Assistant's colour for it. "More" opens the picker with fan and swing.
|
||||
- obj:
|
||||
id: climate_mode_keys
|
||||
align: TOP_MID
|
||||
y: 364
|
||||
width: 94%
|
||||
height: 76
|
||||
bg_opa: TRANSP
|
||||
border_width: 0
|
||||
indicator:
|
||||
arc_color: 0x00A6ED
|
||||
arc_opa: COVER
|
||||
arc_width: 30
|
||||
arc_rounded: true
|
||||
knob:
|
||||
bg_color: 0x111111
|
||||
bg_opa: COVER
|
||||
border_width: 0
|
||||
shadow_width: 0
|
||||
on_value:
|
||||
- script.execute:
|
||||
id: climate_target_preview
|
||||
value: !lambda "return x;"
|
||||
on_release:
|
||||
- script.execute:
|
||||
id: climate_target_commit
|
||||
value: !lambda "return lv_arc_get_value(id(climate_arc));"
|
||||
|
||||
- label:
|
||||
id: climate_set_label
|
||||
align: CENTER
|
||||
y: -32
|
||||
text: "Target"
|
||||
text_font: sublabel_big
|
||||
text_color: 0x1B1B1B
|
||||
text_opa: 68%
|
||||
pad_all: 0
|
||||
clickable: false
|
||||
|
||||
- label:
|
||||
id: climate_target_label
|
||||
align: CENTER
|
||||
y: 40
|
||||
text: "20.0°"
|
||||
text_font: climate_number
|
||||
text_color: 0x1B1B1B
|
||||
clickable: false
|
||||
|
||||
scrollable: false
|
||||
layout:
|
||||
type: FLEX
|
||||
flex_flow: ROW
|
||||
flex_align_main: CENTER
|
||||
flex_align_cross: CENTER
|
||||
pad_column: 10
|
||||
widgets:
|
||||
- obj:
|
||||
id: cmkey_auto
|
||||
flex_grow: 1
|
||||
height: 76
|
||||
radius: 38
|
||||
bg_color: 0xFFFFFF
|
||||
bg_opa: COVER
|
||||
border_width: 1
|
||||
border_color: 0xDDDDDD
|
||||
pad_all: 0
|
||||
clickable: true
|
||||
scrollable: false
|
||||
pressed:
|
||||
bg_color: 0xEEEEEE
|
||||
on_click:
|
||||
- script.execute: { id: set_climate_mode, mode: "auto" }
|
||||
widgets:
|
||||
- label:
|
||||
align: CENTER
|
||||
text: "\U000F1B17"
|
||||
text_font: materialdesign_icons
|
||||
text_color: 0x46525E
|
||||
clickable: false
|
||||
- obj:
|
||||
id: cmkey_heat_cool
|
||||
flex_grow: 1
|
||||
height: 76
|
||||
radius: 38
|
||||
bg_color: 0xFFFFFF
|
||||
bg_opa: COVER
|
||||
border_width: 1
|
||||
border_color: 0xDDDDDD
|
||||
pad_all: 0
|
||||
clickable: true
|
||||
scrollable: false
|
||||
pressed:
|
||||
bg_color: 0xEEEEEE
|
||||
on_click:
|
||||
- script.execute: { id: set_climate_mode, mode: "heat_cool" }
|
||||
widgets:
|
||||
- label:
|
||||
align: CENTER
|
||||
text: "\U000F1A79"
|
||||
text_font: materialdesign_icons
|
||||
text_color: 0x46525E
|
||||
clickable: false
|
||||
- obj:
|
||||
id: cmkey_heat
|
||||
flex_grow: 1
|
||||
height: 76
|
||||
radius: 38
|
||||
bg_color: 0xFFFFFF
|
||||
bg_opa: COVER
|
||||
border_width: 1
|
||||
border_color: 0xDDDDDD
|
||||
pad_all: 0
|
||||
clickable: true
|
||||
scrollable: false
|
||||
pressed:
|
||||
bg_color: 0xEEEEEE
|
||||
on_click:
|
||||
- script.execute: { id: set_climate_mode, mode: "heat" }
|
||||
widgets:
|
||||
- label:
|
||||
align: CENTER
|
||||
text: "\U000F0238"
|
||||
text_font: materialdesign_icons
|
||||
text_color: 0x46525E
|
||||
clickable: false
|
||||
- obj:
|
||||
id: cmkey_cool
|
||||
flex_grow: 1
|
||||
height: 76
|
||||
radius: 38
|
||||
bg_color: 0xFFFFFF
|
||||
bg_opa: COVER
|
||||
border_width: 1
|
||||
border_color: 0xDDDDDD
|
||||
pad_all: 0
|
||||
clickable: true
|
||||
scrollable: false
|
||||
pressed:
|
||||
bg_color: 0xEEEEEE
|
||||
on_click:
|
||||
- script.execute: { id: set_climate_mode, mode: "cool" }
|
||||
widgets:
|
||||
- label:
|
||||
align: CENTER
|
||||
text: "\U000F0717"
|
||||
text_font: materialdesign_icons
|
||||
text_color: 0x46525E
|
||||
clickable: false
|
||||
- obj:
|
||||
id: cmkey_dry
|
||||
flex_grow: 1
|
||||
height: 76
|
||||
radius: 38
|
||||
bg_color: 0xFFFFFF
|
||||
bg_opa: COVER
|
||||
border_width: 1
|
||||
border_color: 0xDDDDDD
|
||||
pad_all: 0
|
||||
clickable: true
|
||||
scrollable: false
|
||||
pressed:
|
||||
bg_color: 0xEEEEEE
|
||||
on_click:
|
||||
- script.execute: { id: set_climate_mode, mode: "dry" }
|
||||
widgets:
|
||||
- label:
|
||||
align: CENTER
|
||||
text: "\U000F058E"
|
||||
text_font: materialdesign_icons
|
||||
text_color: 0x46525E
|
||||
clickable: false
|
||||
- obj:
|
||||
id: cmkey_fan_only
|
||||
flex_grow: 1
|
||||
height: 76
|
||||
radius: 38
|
||||
bg_color: 0xFFFFFF
|
||||
bg_opa: COVER
|
||||
border_width: 1
|
||||
border_color: 0xDDDDDD
|
||||
pad_all: 0
|
||||
clickable: true
|
||||
scrollable: false
|
||||
pressed:
|
||||
bg_color: 0xEEEEEE
|
||||
on_click:
|
||||
- script.execute: { id: set_climate_mode, mode: "fan_only" }
|
||||
widgets:
|
||||
- label:
|
||||
align: CENTER
|
||||
text: "\U000F0210"
|
||||
text_font: materialdesign_icons
|
||||
text_color: 0x46525E
|
||||
clickable: false
|
||||
- obj:
|
||||
id: cmkey_more
|
||||
flex_grow: 1
|
||||
height: 76
|
||||
radius: 38
|
||||
bg_color: 0xFFFFFF
|
||||
bg_opa: COVER
|
||||
border_width: 1
|
||||
border_color: 0xDDDDDD
|
||||
pad_all: 0
|
||||
clickable: true
|
||||
scrollable: false
|
||||
pressed:
|
||||
bg_color: 0xEEEEEE
|
||||
on_click:
|
||||
- script.execute: open_climate_mode_picker
|
||||
widgets:
|
||||
- label:
|
||||
align: CENTER
|
||||
text: "\U000F01D8"
|
||||
text_font: materialdesign_icons
|
||||
text_color: 0x46525E
|
||||
clickable: false
|
||||
# Fan and swing, each a row of choices behind its icon (climate_card.h fills the card).
|
||||
- obj:
|
||||
id: climate_minus_button
|
||||
align: BOTTOM_LEFT
|
||||
x: 57
|
||||
y: -32
|
||||
width: 72
|
||||
height: 72
|
||||
radius: 22
|
||||
bg_color: 0xEEEEEE
|
||||
id: climate_settings_card
|
||||
align: TOP_MID
|
||||
y: 340
|
||||
width: 94%
|
||||
height: 116
|
||||
radius: 24
|
||||
bg_color: 0xFFFFFF
|
||||
bg_opa: COVER
|
||||
border_width: 1
|
||||
border_color: 0xFFFFFF
|
||||
border_opa: 16%
|
||||
clickable: true
|
||||
border_color: 0xDDDDDD
|
||||
pad_all: 0
|
||||
hidden: true
|
||||
clickable: false
|
||||
scrollable: false
|
||||
on_click:
|
||||
- script.execute:
|
||||
id: climate_adjust_target
|
||||
direction: -1
|
||||
widgets:
|
||||
- label:
|
||||
align: CENTER
|
||||
text: "-"
|
||||
text_font: headline
|
||||
text_color: 0x1B1B1B
|
||||
clickable: false
|
||||
|
||||
- obj:
|
||||
id: climate_plus_button
|
||||
align: BOTTOM_RIGHT
|
||||
x: -57
|
||||
y: -32
|
||||
width: 72
|
||||
height: 72
|
||||
radius: 22
|
||||
bg_color: 0xEEEEEE
|
||||
bg_opa: COVER
|
||||
border_width: 1
|
||||
border_color: 0xFFFFFF
|
||||
border_opa: 16%
|
||||
clickable: true
|
||||
scrollable: false
|
||||
on_click:
|
||||
- script.execute:
|
||||
id: climate_adjust_target
|
||||
direction: 1
|
||||
widgets:
|
||||
- label:
|
||||
align: CENTER
|
||||
text: "+"
|
||||
text_font: headline
|
||||
text_color: 0x1B1B1B
|
||||
clickable: false
|
||||
|
||||
- obj:
|
||||
id: climate_mode_pill
|
||||
align: BOTTOM_MID
|
||||
y: -36
|
||||
width: 189
|
||||
height: 68
|
||||
radius: 26
|
||||
bg_color: 0xF0F0F0
|
||||
bg_opa: 82%
|
||||
border_width: 0
|
||||
clickable: true
|
||||
scrollable: false
|
||||
on_click:
|
||||
- script.execute: open_climate_mode_picker
|
||||
widgets:
|
||||
- label:
|
||||
id: climate_mode_label
|
||||
align: CENTER
|
||||
text: "Auto"
|
||||
text_font: sublabel_big
|
||||
text_color: 0x1B1B1B
|
||||
clickable: false
|
||||
# ---------- CLIMATE MODE PICKER ----------
|
||||
# Replaces cycling through modes. Cycling sends a set_hvac_mode on every
|
||||
# tap, so to get from 'cool' to 'dry' a heat pump actually passes through
|
||||
@@ -5405,55 +5575,157 @@ script:
|
||||
id: smartdisplay_action
|
||||
state: ""
|
||||
|
||||
- id: climate_target_preview
|
||||
# A -/+ tap on the climate card: the number follows at once, the call waits for the last tap.
|
||||
# Holding a key steps three times a second.
|
||||
- id: climate_adjust_target
|
||||
parameters:
|
||||
value: int
|
||||
direction: int
|
||||
held: bool
|
||||
then:
|
||||
- lambda: |-
|
||||
if (held && millis() - id(climate_edit_ms) < 300) return;
|
||||
int step_x10 = std::max(5, id(active_climate_step_x10));
|
||||
int next = cyd::quantize_temperature(id(active_climate_target_x10) + direction * step_x10,
|
||||
id(active_climate_min_x10), id(active_climate_max_x10), step_x10);
|
||||
id(climate_edit_ms) = millis();
|
||||
id(climate_edit_pending) = true;
|
||||
int min_x10 = id(active_climate_min_x10);
|
||||
int max_x10 = id(active_climate_max_x10);
|
||||
value = cyd::quantize_temperature(value, min_x10, max_x10,
|
||||
id(active_climate_step_x10));
|
||||
id(active_climate_target_x10) = value;
|
||||
if (next == id(active_climate_target_x10) && id(active_climate_target_known)) return;
|
||||
id(active_climate_target_x10) = next;
|
||||
id(active_climate_target_known) = true;
|
||||
id(climate_card_refresh).execute();
|
||||
id(climate_target_send).execute(id(active_entity), next / 10.0f);
|
||||
|
||||
char buf[16];
|
||||
snprintf(buf, sizeof(buf), "%.1f°", value / 10.0f);
|
||||
lv_label_set_text(id(climate_target_label), buf);
|
||||
lv_arc_set_value(id(climate_arc), value);
|
||||
|
||||
- id: climate_target_commit
|
||||
# One set_temperature for a series of taps: every tap restarts the wait with the newest value.
|
||||
# Entity and value travel along, so leaving the card right after a tap still sends it.
|
||||
- id: climate_target_send
|
||||
mode: restart
|
||||
parameters:
|
||||
value: int
|
||||
entity: string
|
||||
value: float
|
||||
then:
|
||||
- script.execute:
|
||||
id: climate_target_preview
|
||||
value: !lambda "return value;"
|
||||
- delay: 700ms
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return (!runtime_tiles::enabled || runtime_tiles::fresh()) && std::string("${DIRECT_ACTIONS}") == "true";'
|
||||
lambda: 'return (!runtime_tiles::enabled || runtime_tiles::fresh()) && std::string("${DIRECT_ACTIONS}") == "true" && !entity.empty();'
|
||||
then:
|
||||
- homeassistant.action:
|
||||
action: climate.set_temperature
|
||||
data:
|
||||
entity_id: !lambda "return id(active_entity);"
|
||||
temperature: !lambda "return id(active_climate_target_x10) / 10.0f;"
|
||||
entity_id: !lambda "return entity;"
|
||||
temperature: !lambda "return value;"
|
||||
|
||||
- id: climate_adjust_target
|
||||
parameters:
|
||||
direction: int
|
||||
# Draws the climate card from the active_climate_* globals: status line, setpoint, -/+ and mode keys.
|
||||
- id: climate_card_refresh
|
||||
then:
|
||||
- lambda: |-
|
||||
int step_x10 = id(active_climate_step_x10);
|
||||
if (step_x10 < 5) step_x10 = 5;
|
||||
int next = id(active_climate_target_x10) + (direction * step_x10);
|
||||
if (next < id(active_climate_min_x10)) next = id(active_climate_min_x10);
|
||||
if (next > id(active_climate_max_x10)) next = id(active_climate_max_x10);
|
||||
id(active_climate_target_x10) = next;
|
||||
- script.execute:
|
||||
id: climate_target_commit
|
||||
value: !lambda "return id(active_climate_target_x10);"
|
||||
auto lower = [](std::string v) {
|
||||
for (char &c : v) { if (c >= 'A' && c <= 'Z') c = (char)(c - 'A' + 'a'); }
|
||||
return v;
|
||||
};
|
||||
std::string mode = lower(id(active_climate_mode));
|
||||
bool off = mode == "off" || mode.empty() || mode == "unknown" || mode == "unavailable";
|
||||
// What the device does (Heating), else its mode (Heat); then the room.
|
||||
std::string status = off ? std::string("Off") : std::string(tile_controls::climate_action_text(lower(id(active_climate_action))));
|
||||
if (status.empty()) status = tile_controls::climate_mode_text(mode);
|
||||
char part[32];
|
||||
if (std::isfinite(id(active_climate_current))) { snprintf(part, sizeof(part), " · Now %.1f°", id(active_climate_current)); status += part; }
|
||||
if (id(active_climate_humidity) >= 0) { snprintf(part, sizeof(part), " · %d%%", id(active_climate_humidity)); status += part; }
|
||||
lv_label_set_text(id(climate_current_label), status.c_str());
|
||||
|
||||
int target = id(active_climate_target_x10);
|
||||
std::string value = id(active_climate_target_known)
|
||||
? tile_controls::format_value(target / 10.0f, id(active_climate_step_x10) / 10.0f, "°") : std::string("--");
|
||||
lv_label_set_text(id(climate_target_label), value.c_str());
|
||||
lv_obj_set_style_text_color(id(climate_target_label), lv_color_hex(off ? 0x9E9E9E : 0x1B1B1B), LV_PART_MAIN);
|
||||
auto enable = [](lv_obj_t *key, bool on) {
|
||||
if (on) lv_obj_remove_state(key, LV_STATE_DISABLED); else lv_obj_add_state(key, LV_STATE_DISABLED);
|
||||
};
|
||||
enable(id(climate_minus_button), !id(active_climate_target_known) || target > id(active_climate_min_x10));
|
||||
enable(id(climate_plus_button), !id(active_climate_target_known) || target < id(active_climate_max_x10));
|
||||
|
||||
// One key per supported mode, in Home Assistant's order. Fan and swing add "more"; with it
|
||||
// five mode keys fit, and when a sixth mode is in use it takes the last place.
|
||||
std::string supported = lower(id(active_climate_supported_modes));
|
||||
auto has = [&](const char *m) {
|
||||
return supported.find(std::string("\"") + m + "\"") != std::string::npos ||
|
||||
supported.find(std::string("'") + m + "'") != std::string::npos;
|
||||
};
|
||||
struct Key { lv_obj_t *obj; const char *mode; };
|
||||
const Key keys[] = {{id(cmkey_auto), "auto"}, {id(cmkey_heat_cool), "heat_cool"}, {id(cmkey_heat), "heat"},
|
||||
{id(cmkey_cool), "cool"}, {id(cmkey_dry), "dry"}, {id(cmkey_fan_only), "fan_only"}};
|
||||
// The Guition shows fan and swing on their own card below, so no "more" key.
|
||||
bool more = false;
|
||||
const Key *visible[6];
|
||||
unsigned count = 0, room = more ? 5 : 6;
|
||||
for (const auto &k : keys) if (has(k.mode)) visible[count++] = &k;
|
||||
if (count > room) {
|
||||
for (unsigned i = room; i < count; ++i) if (mode == visible[i]->mode) visible[room - 1] = visible[i];
|
||||
count = room;
|
||||
}
|
||||
for (const auto &k : keys) {
|
||||
bool show = false;
|
||||
for (unsigned i = 0; i < count; ++i) show = show || visible[i] == &k;
|
||||
if (show) lv_obj_remove_flag(k.obj, LV_OBJ_FLAG_HIDDEN); else lv_obj_add_flag(k.obj, LV_OBJ_FLAG_HIDDEN);
|
||||
bool selected = show && !off && mode == k.mode;
|
||||
uint32_t color = tile_controls::mode_color(k.mode);
|
||||
lv_obj_set_style_bg_color(k.obj, lv_color_hex(selected ? color : 0xFFFFFF), LV_PART_MAIN);
|
||||
lv_obj_set_style_border_color(k.obj, lv_color_hex(selected ? color : 0xDDDDDD), LV_PART_MAIN);
|
||||
lv_obj_set_style_text_color(lv_obj_get_child(k.obj, 0), lv_color_hex(selected ? 0xFFFFFF : 0x46525E), LV_PART_MAIN);
|
||||
}
|
||||
if (more) lv_obj_remove_flag(id(cmkey_more), LV_OBJ_FLAG_HIDDEN); else lv_obj_add_flag(id(cmkey_more), LV_OBJ_FLAG_HIDDEN);
|
||||
// One mode is no choice: the power key already turns it on and off.
|
||||
const bool show_keys = count > 1 || more;
|
||||
if (show_keys) lv_obj_remove_flag(id(climate_mode_keys), LV_OBJ_FLAG_HIDDEN);
|
||||
else lv_obj_add_flag(id(climate_mode_keys), LV_OBJ_FLAG_HIDDEN);
|
||||
|
||||
// Fan and swing rows, in the entity's own names and order.
|
||||
climate_card::Row settings[2];
|
||||
int rows = 0;
|
||||
if (!cyd::list_item(id(active_climate_fan_modes), 0).empty())
|
||||
settings[rows++] = {'f', "\U000F0210", id(active_climate_fan_modes), id(active_climate_fan_mode)};
|
||||
if (!cyd::list_item(id(active_climate_swing_modes), 0).empty())
|
||||
settings[rows++] = {'s', "\U000F1C91", id(active_climate_swing_modes), id(active_climate_swing_mode)};
|
||||
// One layout per card: the setpoint gives room to the mode keys and the settings below it,
|
||||
// and a card with nothing below keeps the setpoint centred.
|
||||
static int laid_out = -1;
|
||||
if (laid_out != rows * 2 + show_keys) {
|
||||
laid_out = rows * 2 + show_keys;
|
||||
struct Layout { int status, card_y, card_h, key, number_y, caption_y, modes_y, modes_h, settings_y, edge, row_h, gap; };
|
||||
static const Layout layouts[6] = {
|
||||
// no mode keys: 0, 1, 2 rows
|
||||
{92, 180, 200, 116, -14, 46, 0, 0, 0, 14, 48, 10},
|
||||
{92, 140, 200, 116, -14, 46, 0, 0, 364, 14, 48, 10},
|
||||
{90, 130, 180, 108, -12, 42, 0, 0, 330, 14, 46, 10},
|
||||
// mode keys: 0, 1, 2 rows
|
||||
{92, 136, 200, 116, -14, 46, 364, 76, 0, 14, 48, 10},
|
||||
{90, 126, 170, 108, -12, 42, 312, 68, 394, 12, 44, 8},
|
||||
{86, 118, 140, 96, -10, 36, 270, 60, 342, 12, 42, 8},
|
||||
};
|
||||
const Layout &l = layouts[(show_keys ? 3 : 0) + rows];
|
||||
lv_obj_set_y(id(climate_current_label), l.status);
|
||||
lv_obj_set_y(id(climate_setpoint_card), l.card_y);
|
||||
lv_obj_set_height(id(climate_setpoint_card), l.card_h);
|
||||
for (lv_obj_t *button : {id(climate_minus_button), id(climate_plus_button)}) {
|
||||
lv_obj_set_size(button, l.key, l.key);
|
||||
lv_obj_set_style_radius(button, l.key / 2, LV_PART_MAIN);
|
||||
}
|
||||
lv_obj_set_y(id(climate_target_label), l.number_y);
|
||||
lv_obj_set_y(id(climate_set_label), l.caption_y);
|
||||
if (show_keys) {
|
||||
lv_obj_set_y(id(climate_mode_keys), l.modes_y);
|
||||
lv_obj_set_height(id(climate_mode_keys), l.modes_h);
|
||||
for (lv_obj_t *mode_key : {id(cmkey_auto), id(cmkey_heat_cool), id(cmkey_heat), id(cmkey_cool), id(cmkey_dry), id(cmkey_fan_only), id(cmkey_more)}) {
|
||||
lv_obj_set_height(mode_key, l.modes_h);
|
||||
lv_obj_set_style_radius(mode_key, l.modes_h / 2, LV_PART_MAIN);
|
||||
}
|
||||
}
|
||||
lv_obj_set_y(id(climate_settings_card), l.settings_y);
|
||||
climate_card::look.edge = l.edge;
|
||||
climate_card::look.row_h = l.row_h;
|
||||
climate_card::look.gap = l.gap;
|
||||
}
|
||||
climate_card::show(settings, rows);
|
||||
id(climate_power_refresh).execute();
|
||||
|
||||
# Opens the mode picker. Hides modes the entity doesn't support and marks
|
||||
# the current one, so you see where you stand before you pick something.
|
||||
@@ -5563,6 +5835,7 @@ script:
|
||||
id(active_climate_fan_mode) = cyd::list_item(id(active_climate_fan_modes), index);
|
||||
id(climate_edit_ms) = millis();
|
||||
id(climate_edit_pending) = true;
|
||||
id(climate_card_refresh).execute();
|
||||
- lvgl.widget.hide: climate_mode_overlay
|
||||
- if:
|
||||
condition:
|
||||
@@ -5582,6 +5855,7 @@ script:
|
||||
id(active_climate_swing_mode) = cyd::list_item(id(active_climate_swing_modes), index);
|
||||
id(climate_edit_ms) = millis();
|
||||
id(climate_edit_pending) = true;
|
||||
id(climate_card_refresh).execute();
|
||||
- lvgl.widget.hide: climate_mode_overlay
|
||||
- if:
|
||||
condition:
|
||||
@@ -5603,8 +5877,8 @@ script:
|
||||
id(active_climate_power_on) = mode == "off" || mode.empty() || mode == "unknown";
|
||||
id(climate_edit_ms) = millis();
|
||||
id(climate_edit_pending) = true;
|
||||
if (!id(active_climate_power_on)) { id(active_climate_mode) = "off"; lv_label_set_text(id(climate_mode_label), "Off"); }
|
||||
id(climate_power_refresh).execute();
|
||||
if (!id(active_climate_power_on)) id(active_climate_mode) = "off";
|
||||
id(climate_card_refresh).execute();
|
||||
- if:
|
||||
condition:
|
||||
lambda: 'return (!runtime_tiles::enabled || runtime_tiles::fresh()) && std::string("${DIRECT_ACTIONS}") == "true" && id(active_climate_power_on);'
|
||||
@@ -5643,9 +5917,10 @@ script:
|
||||
id(climate_edit_ms) = millis();
|
||||
id(climate_edit_pending) = true;
|
||||
id(active_climate_mode) = mode;
|
||||
// The action line would still say what the old mode did.
|
||||
id(active_climate_action).clear();
|
||||
id(active_climate_power_on) = mode != "off";
|
||||
id(climate_power_refresh).execute();
|
||||
lv_label_set_text(id(climate_mode_label), tile_controls::climate_mode_text(mode));
|
||||
id(climate_card_refresh).execute();
|
||||
- lvgl.widget.hide: climate_mode_overlay
|
||||
- if:
|
||||
condition:
|
||||
@@ -6200,6 +6475,8 @@ script:
|
||||
}
|
||||
|
||||
id(active_climate_current_x10) = to_x10(climate_current_temperature, 0);
|
||||
id(active_climate_current) = climate_current_temperature;
|
||||
id(active_climate_target_known) = !isnan(climate_target_temperature);
|
||||
int fallback_target = isnan(climate_current_temperature) ? 200 : id(active_climate_current_x10);
|
||||
id(active_climate_target_x10) = to_x10(climate_target_temperature, fallback_target);
|
||||
if (id(active_climate_target_x10) < id(active_climate_min_x10)) id(active_climate_target_x10) = id(active_climate_min_x10);
|
||||
@@ -6212,41 +6489,7 @@ script:
|
||||
id(active_climate_supported_modes) = climate_supported_modes;
|
||||
|
||||
lv_label_set_text(id(climate_detail_title), title.c_str());
|
||||
|
||||
char current_buf[48];
|
||||
if (isnan(climate_current_temperature)) {
|
||||
snprintf(current_buf, sizeof(current_buf), "Now: --");
|
||||
} else if (id(active_climate_humidity) >= 0) {
|
||||
snprintf(current_buf, sizeof(current_buf), "Now: %.1f° · %d%%", climate_current_temperature, id(active_climate_humidity));
|
||||
} else {
|
||||
snprintf(current_buf, sizeof(current_buf), "Now: %.1f°", climate_current_temperature);
|
||||
}
|
||||
lv_label_set_text(id(climate_current_label), current_buf);
|
||||
|
||||
char target_buf[16];
|
||||
snprintf(target_buf, sizeof(target_buf), "%.1f°", id(active_climate_target_x10) / 10.0f);
|
||||
lv_label_set_text(id(climate_target_label), target_buf);
|
||||
lv_label_set_text(id(climate_mode_label), tile_controls::climate_mode_text(id(active_climate_mode)));
|
||||
id(climate_power_refresh).execute();
|
||||
|
||||
lv_arc_set_range(id(climate_arc), id(active_climate_min_x10), id(active_climate_max_x10));
|
||||
lv_arc_set_value(id(climate_arc), id(active_climate_target_x10));
|
||||
|
||||
if (atoi("${DISPLAY_W}") < atoi("${DISPLAY_H}")) {
|
||||
lv_obj_set_size(id(climate_arc), 294, 294);
|
||||
lv_obj_set_y(id(climate_arc), 16);
|
||||
lv_obj_set_y(id(climate_current_label), 96);
|
||||
lv_obj_set_y(id(climate_minus_button), -124);
|
||||
lv_obj_set_y(id(climate_plus_button), -124);
|
||||
lv_obj_set_y(id(climate_mode_pill), -36);
|
||||
} else {
|
||||
lv_obj_set_size(id(climate_arc), 264, 264);
|
||||
lv_obj_set_y(id(climate_arc), 36);
|
||||
lv_obj_set_y(id(climate_current_label), 80);
|
||||
lv_obj_set_y(id(climate_minus_button), -28);
|
||||
lv_obj_set_y(id(climate_plus_button), -28);
|
||||
lv_obj_set_y(id(climate_mode_pill), -30);
|
||||
}
|
||||
id(climate_card_refresh).execute();
|
||||
|
||||
lv_obj_add_flag(id(brightness_overlay), LV_OBJ_FLAG_HIDDEN);
|
||||
lv_obj_clear_flag(id(climate_detail_overlay), LV_OBJ_FLAG_HIDDEN);
|
||||
@@ -6572,66 +6815,24 @@ script:
|
||||
if (!id(ha_state_tile10).has_state() || id(ha_state_tile10).state == "unknown" || id(ha_state_tile10).state == "unavailable")
|
||||
set_lbl(id(t10_value), "Unavailable");
|
||||
if (id(active_control_kind) == "climate_temperature" && !lv_obj_has_flag(id(climate_detail_overlay), LV_OBJ_FLAG_HIDDEN)) {
|
||||
auto label_for_climate_mode = [](std::string mode) {
|
||||
for (char &c : mode) {
|
||||
if (c >= 'A' && c <= 'Z') c = (char) (c - 'A' + 'a');
|
||||
}
|
||||
if (mode == "off") return std::string("Off");
|
||||
if (mode == "heat") return std::string("Heat");
|
||||
if (mode == "cool") return std::string("Cool");
|
||||
if (mode == "heat_cool") return std::string("Heat/Cool");
|
||||
if (mode == "auto") return std::string("Auto");
|
||||
if (mode == "dry") return std::string("Dry");
|
||||
if (mode == "fan_only") return std::string("Fan");
|
||||
return mode.empty() ? std::string("Auto") : mode;
|
||||
};
|
||||
auto sync_open_climate = [&](const std::string& entity,
|
||||
float current_temperature,
|
||||
float target_temperature,
|
||||
float humidity,
|
||||
const std::string& climate_mode) {
|
||||
if (id(active_entity) != entity) return;
|
||||
auto to_x10 = [](float value, int fallback) -> int {
|
||||
if (isnan(value)) return fallback;
|
||||
return (int) lround(value * 10.0f);
|
||||
};
|
||||
|
||||
id(active_climate_current_x10) = to_x10(current_temperature, id(active_climate_current_x10));
|
||||
id(active_climate_current) = current_temperature;
|
||||
id(active_climate_humidity) = isnan(humidity) ? -1 : (int) lround(humidity);
|
||||
if (!climate_mode.empty() && !id(touch_down) &&
|
||||
!(id(climate_edit_pending) && millis() - id(climate_edit_ms) < 3000)) {
|
||||
id(active_climate_mode) = climate_mode;
|
||||
lv_label_set_text(id(climate_mode_label), label_for_climate_mode(climate_mode).c_str());
|
||||
}
|
||||
|
||||
const bool editing = id(touch_down) ||
|
||||
(id(climate_edit_pending) && millis() - id(climate_edit_ms) < 3000);
|
||||
if (!editing) id(climate_edit_pending) = false;
|
||||
int target_x10 = editing ? id(active_climate_target_x10) :
|
||||
to_x10(target_temperature, id(active_climate_target_x10));
|
||||
if (target_x10 < id(active_climate_min_x10)) target_x10 = id(active_climate_min_x10);
|
||||
if (target_x10 > id(active_climate_max_x10)) target_x10 = id(active_climate_max_x10);
|
||||
int step_x10 = id(active_climate_step_x10);
|
||||
if (step_x10 < 5) step_x10 = 5;
|
||||
target_x10 = id(active_climate_min_x10) + (int) lround((target_x10 - id(active_climate_min_x10)) / (float) step_x10) * step_x10;
|
||||
if (target_x10 < id(active_climate_min_x10)) target_x10 = id(active_climate_min_x10);
|
||||
if (target_x10 > id(active_climate_max_x10)) target_x10 = id(active_climate_max_x10);
|
||||
id(active_climate_target_x10) = target_x10;
|
||||
|
||||
char current_buf[48];
|
||||
if (isnan(current_temperature)) {
|
||||
snprintf(current_buf, sizeof(current_buf), "Now: --");
|
||||
} else if (id(active_climate_humidity) >= 0) {
|
||||
snprintf(current_buf, sizeof(current_buf), "Now: %.1f° · %d%%", current_temperature, id(active_climate_humidity));
|
||||
} else {
|
||||
snprintf(current_buf, sizeof(current_buf), "Now: %.1f°", current_temperature);
|
||||
if (!climate_mode.empty() && !editing) id(active_climate_mode) = climate_mode;
|
||||
if (!editing && !isnan(target_temperature)) {
|
||||
id(active_climate_target_x10) = cyd::quantize_temperature((int) lround(target_temperature * 10.0f),
|
||||
id(active_climate_min_x10), id(active_climate_max_x10), std::max(5, id(active_climate_step_x10)));
|
||||
id(active_climate_target_known) = true;
|
||||
}
|
||||
lv_label_set_text(id(climate_current_label), current_buf);
|
||||
|
||||
char target_buf[16];
|
||||
snprintf(target_buf, sizeof(target_buf), "%.1f°", id(active_climate_target_x10) / 10.0f);
|
||||
lv_label_set_text(id(climate_target_label), target_buf);
|
||||
lv_arc_set_value(id(climate_arc), id(active_climate_target_x10));
|
||||
id(climate_card_refresh).execute();
|
||||
};
|
||||
|
||||
if (std::string("${TILE1_TYPE}") == "climate") sync_open_climate("${TILE1_ENTITY}", id(tile1_climate_current_temperature).state, id(tile1_climate_target_temperature).state, id(tile1_climate_humidity).state, std::string(id(tile1_climate_mode).state.c_str()));
|
||||
|
||||
Reference in New Issue
Block a user