Second hand on the analog clock, sliders like Home Assistant's, one top bar on every card (0.2.43)

Firmware 0.2.37 for both boards:
- The analog clock card gets a thin red second hand that moves every second while the
  screen is awake (runtime_tiles::screen_awake, set by the profiles from display_dimmed);
  in standby it hides and the clock keeps its once-a-minute redraw.
- Card sliders follow HA's control slider: 12/42 and 8/42 corners, a 4 px handle an
  eighth of the height from the fill end, a stub of a third of the height at 0 or 1 %,
  the track in the fill colour at 20 %. An off light or fan shows only the empty grey
  track, also in the colour card's brightness row. A light's slider floors at 1 %.
- Every overlay card shares one top bar: a round back arrow at the left (60/40 px), the
  name centred, and only the climate power as a right-hand action. The "done"/"ok"
  buttons of the colour and vacuum cards are gone; the brightness card gets its arrow.
- The top bar reads "Connecting to Home Assistant..." / "Waiting for ESP Screens..."
  until the first layout, instead of "Choose tiles in HA".

Checked with the host renderer for both boards and on the Guition over USB.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

screen_manager/CHANGELOG.md

@@ -1,3 +1,14 @@
+## 0.2.43 (firmware 0.2.37)
+
+A second hand on the analog clock, sliders that look like Home Assistant's, and one top bar for every card.
+
+- **Second hand.** The analog clock card gets a thin red second hand with a short tail that moves every second while the screen is in use. During standby (also at the night level) it is hidden and the clock keeps its once-a-minute redraw, so a sleeping screen does no extra work. Only the hand's own line is redrawn, not the card. The small dial in the top bar stays as it was.
+- **Sliders like Home Assistant.** Card sliders (a light's or fan's direct control, the Sonos volume, the brightness row of the colour card) now use the proportions of HA's control slider: softer corners on track and fill, a slimmer white handle a little in from the end of the fill, a track in the fill colour at 20 %, and a short stub instead of a full circle at 0 or 1 %. A light or fan that is off shows only the empty grey track, without fill or handle, exactly as HA does; the colour card's brightness row then reads Off until you move it.
+- **A light's slider stops at 1 %.** As in HA, dragging a light's slider all the way down leaves it on at 1 %; tapping the card turns it off.
+- **One top bar on every card.** Every card that opens over the tiles (brightness, colour, climate, vacuum, media, timer, switch, sensor history and the others) has the same bar: a round back arrow at the left, big enough for a finger (60 px on the Guition, 40 px on the CYD), and the name in the middle. Only a card with one overriding action keeps a round button at the right, such as the on/off of a climate device; the colour and vacuum cards lose their extra "done" buttons, which only closed the card. The brightness card, which had no button at all, gets the back arrow too.
+- **A starting screen says so.** Until the first layout arrives the top bar reads "Connecting to Home Assistant..." and then "Waiting for ESP Screens...", instead of "Choose tiles in HA".
+- Firmware 0.2.37 for both boards; the app offers the update.
+
 ## 0.2.42 (firmware 0.2.36)
 
 Smoother page swipes and a new colour card for lights.

screen_manager/app/core.py

@@ -17,7 +17,7 @@ WEEKDAYS = ['Mo', 'Tu', 'We', 'Th', 'Fr', 'Sa', 'Su']
 REPO = 'https://github.com/MaxGramser/homeassistant_espscreen'
 REFS = {'cyd': 'main', 'guition': 'main'}
 # Firmware shipped with this app release; screens below it get an update offer.
-FIRMWARE_VERSION = '0.2.36'
+FIRMWARE_VERSION = '0.2.37'
 ATTRS = frozenset('brightness percentage current_position current_temperature temperature current_humidity min_temp max_temp target_temp_step supported_color_modes hvac_modes hvac_action hs_color color_temp_kelvin min_color_temp_kelvin max_color_temp_kelvin fan_speed_list unit_of_measurement battery_level fan_speed volume_level is_volume_muted media_title options min max step temperature_unit supported_features device_class next_rising next_setting finishes_at duration remaining humidity wind_speed wind_speed_unit apparent_temperature fan_modes swing_modes fan_mode swing_mode'.split())
 # Attributes whose boolean value the screen needs; every other bool stays behind.
 BOOL_ATTRS = frozenset(['is_volume_muted'])

screen_manager/app/tile_icons.py

@@ -205,6 +205,8 @@ FIXED = (
     ('chevron-left', 'F0141'),
     ('chevron-right', 'F0142'),
     ('close', 'F0156'),
+    # Back button of every overlay (firmware 0.2.37+).
+    ('arrow-left', 'F004D'),
     ('sun-snowflake-variant', 'F1A79'),
     ('thermostat-auto', 'F1B17'),
     ('weather-fog', 'F0591'),

screen_manager/config.yaml

@@ -1,5 +1,5 @@
 name: ESP Screen Manager
-version: "0.2.42"
+version: "0.2.43"
 slug: esp_screen_manager
 description: Choose tiles for your CYD and Guition touchscreen, without reflashing.
 url: https://github.com/MaxGramser/homeassistant_espscreen