Feed the edge swipe from the touchscreen triggers again (0.2.34)

The 0.2.32 edge swipe listened on LVGL's input device, but the LVGL 9.5.0
bundled by ESPHome sends the indev PRESSED and RELEASED without PRESSING,
so the swipe never received a position update: on Studio 1 the log showed
the GT911 press and then nothing. The Guition follows the swipe through
on_touch, on_update and on_release again, the route that worked live in
0.2.24 once the card-close fix was in, with ESPHome's own rotation mapping,
the 45-degree rule, end() on release so a stale armed state cannot fire on
the next touch, and the "genegeerd"/"niet gevuurd" log lines. Firmware
0.2.29 for both boards; the app only moves its target version.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

screen_manager/app/core.py

@@ -16,7 +16,7 @@ WEEKDAYS = ['ma', 'di', 'wo', 'do', 'vr', 'za', 'zo']
 REPO = 'https://github.com/MaxGramser/homeassistant_espscreen'
 REFS = {'cyd': 'main', 'guition': 'main'}
 # Firmware shipped with this app release; screens below it get an update offer.
-FIRMWARE_VERSION = '0.2.28'
+FIRMWARE_VERSION = '0.2.29'
 ATTRS = frozenset('brightness percentage current_position current_temperature temperature current_humidity min_temp max_temp target_temp_step supported_color_modes hvac_modes hvac_action hs_color color_temp_kelvin min_color_temp_kelvin max_color_temp_kelvin fan_speed_list unit_of_measurement battery_level fan_speed volume_level is_volume_muted media_title options min max step temperature_unit supported_features device_class next_rising next_setting finishes_at duration remaining humidity wind_speed wind_speed_unit apparent_temperature fan_modes swing_modes fan_mode swing_mode'.split())
 # Attributes whose boolean value the screen needs; every other bool stays behind.
 BOOL_ATTRS = frozenset(['is_volume_muted'])