Fill a blind's slider with its closed part, like its card and Home Assistant's cover dialog (0.2.79)

On the tile (and the strip of a full-page blind) the small slider filled with the open part, while the blind's card
draws the blind hanging from the top: a closed blind looked open on one and closed on the other. Now both fill with
the closed part and dragging right closes; the text still gives the position (open %). The editor's mockup follows.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

packages/cyd.yaml

@@ -18,7 +18,7 @@
 ############################################################
 
 substitutions:
-  SCREEN_FIRMWARE_VERSION: "0.2.65"
+  SCREEN_FIRMWARE_VERSION: "0.2.66"
   # A tap survives a finger that drifts up to this far (320 px over 58 mm: 1 cm); further is a swipe.
   TOUCH_MOVE_LIMIT_PX: "56"
   # Shortest contact that counts as a tap; a resistive panel bounces, a capacitive one does not.

packages/guition.yaml

@@ -3,7 +3,7 @@
 # Source profile for packages/guition.yaml (tools/generate_packages.py); see docs/GUITION.md.
 # A screen gets its tiles from the ESP Screen Manager add-on while it runs. The CYD is its own profile.
 substitutions:
-  SCREEN_FIRMWARE_VERSION: "0.2.65"
+  SCREEN_FIRMWARE_VERSION: "0.2.66"
   # 0: no drift limit. A press that drifts is still a tap as long as the finger lets go on the tile
   # (runtime_tiles::event checks where it let go: LVGL keeps the press on the tile and would click it
   # anywhere), and a quick flick is LVGL's gesture, never a tap (the home_page gesture handler in on_boot).