diff --git a/docs/TEST_RESULTS_022.md b/docs/TEST_RESULTS_022.md
new file mode 100644
index 0000000..3ab7c56
--- /dev/null
+++ b/docs/TEST_RESULTS_022.md
@@ -0,0 +1,18 @@
+# Controle van versie 0.2.2 — 12 september 2026
+
+De optie **Na standby terug naar pagina 1** sluit nu ook de runtime-detailkaart
+boven het tegelraster. Dit geldt onder andere voor vacuum, sensorgeschiedenis,
+media en keuzelijsten. De actieve bedieningsentiteit wordt daarbij gewist.
+
+- 42 Python-tests en acht C++-testprogramma's geslaagd.
+- Easy Setup en handmatige profielen voor Guition en CYD gebouwd met ESPHome
+  2026.6.2; gegenereerde pakketten gecontroleerd.
+- Firmware 0.2.2 via OTA op de Guition geïnstalleerd.
+- Stofzuigermenu via de bestaande diagnosefunctie geopend zonder HA-actie.
+  Voor standby: `dimmed=0`, `runtime_detail=1`.
+- De ingestelde natuurlijke standby na 60 seconden laten aflopen, zonder
+  de gebruikersinstellingen te wijzigen. Daarna: `dimmed=1`, `page=0`
+  (eerste pagina), `runtime_detail=0` (detailmenu gesloten).
+
+Deze test controleert de navigatietoestand op het apparaat. Een CYD was niet
+fysiek aangesloten; daarvan zijn builds en regressies gecontroleerd.
diff --git a/guition-4848s040.yaml b/guition-4848s040.yaml
index bef420e..9bee0cb 100644
--- a/guition-4848s040.yaml
+++ b/guition-4848s040.yaml
@@ -1,7 +1,7 @@
 # Guition ESP32-S3-4848S040 / 4-inch EU wallbox, 480x480 IPS + GT911.
 # Use guition-device.yaml; see docs/GUITION.md. CYD hardware is a separate profile.
 substitutions:
-  SCREEN_FIRMWARE_VERSION: "0.2.1"
+  SCREEN_FIRMWARE_VERSION: "0.2.2"
   DYNAMIC_TILES: "false"
   DASHBOARD_INBOX_INTERNAL: "true"
   DEVICE_NAME: "guition-wallbox"
@@ -765,6 +765,8 @@ api:
               cfg.night_enabled, cfg.night_start, cfg.night_end, cfg.night_brightness,
               cfg.show_clock, cfg.clock_24h, cfg.home_on_standby,
               (unsigned)(millis() - id(last_touch_ms)), id(display_dimmed));
+            ESP_LOGI("ui_diag", "navigation page=%d runtime_detail=%d", id(tile_page),
+              runtime_tiles::detail_root && !lv_obj_has_flag(runtime_tiles::detail_root, LV_OBJ_FLAG_HIDDEN));
             lv_area_t nav, grid;
             lv_obj_update_layout(id(home_page)->obj);
             lv_obj_get_coords(id(page_next), &nav);
@@ -4569,6 +4571,9 @@ script:
                 id(display_dimmed) = true;
                 id(apply_screen_settings).execute();
                 if (screen_settings::current.home_on_standby) {
+                  // Runtime detail cards live above the tile grid, so paging alone cannot close them.
+                  runtime_tiles::hide_detail();
+                  id(active_entity).clear();
                   id(tile_page) = 0;
                   id(show_tile_page).execute();
                 }
diff --git a/home-like-2432s028.yaml b/home-like-2432s028.yaml
index 3f9bd88..7841248 100644
--- a/home-like-2432s028.yaml
+++ b/home-like-2432s028.yaml
@@ -58,7 +58,7 @@
 ############################################################
 
 substitutions:
-  SCREEN_FIRMWARE_VERSION: "0.2.1"
+  SCREEN_FIRMWARE_VERSION: "0.2.2"
   DYNAMIC_TILES: "false"
   DASHBOARD_INBOX_INTERNAL: "true"
   DEVICE_NAME: "cyd-new"
@@ -960,6 +960,8 @@ api:
               cfg.night_enabled, cfg.night_start, cfg.night_end, cfg.night_brightness,
               cfg.show_clock, cfg.clock_24h, cfg.home_on_standby,
               (unsigned)(millis() - id(last_touch_ms)), id(display_dimmed));
+            ESP_LOGI("ui_diag", "navigation page=%d runtime_detail=%d", id(tile_page),
+              runtime_tiles::detail_root && !lv_obj_has_flag(runtime_tiles::detail_root, LV_OBJ_FLAG_HIDDEN));
             lv_area_t nav, grid;
             lv_obj_update_layout(id(home_page)->obj);
             lv_obj_get_coords(id(page_next), &nav);
@@ -4699,6 +4701,9 @@ script:
                 id(display_dimmed) = true;
                 id(apply_screen_settings).execute();
                 if (screen_settings::current.home_on_standby) {
+                  // Runtime detail cards live above the tile grid, so paging alone cannot close them.
+                  runtime_tiles::hide_detail();
+                  id(active_entity).clear();
                   id(tile_page) = 0;
                   id(show_tile_page).execute();
                 }
diff --git a/packages/cyd.yaml b/packages/cyd.yaml
index e12fb30..7758f69 100644
--- a/packages/cyd.yaml
+++ b/packages/cyd.yaml
@@ -59,7 +59,7 @@
 ############################################################
 
 substitutions:
-  SCREEN_FIRMWARE_VERSION: "0.2.1"
+  SCREEN_FIRMWARE_VERSION: "0.2.2"
   DYNAMIC_TILES: "true"
   DASHBOARD_INBOX_INTERNAL: "false"
   DEVICE_NAME: "cyd-new"
@@ -964,6 +964,8 @@ api:
               cfg.night_enabled, cfg.night_start, cfg.night_end, cfg.night_brightness,
               cfg.show_clock, cfg.clock_24h, cfg.home_on_standby,
               (unsigned)(millis() - id(last_touch_ms)), id(display_dimmed));
+            ESP_LOGI("ui_diag", "navigation page=%d runtime_detail=%d", id(tile_page),
+              runtime_tiles::detail_root && !lv_obj_has_flag(runtime_tiles::detail_root, LV_OBJ_FLAG_HIDDEN));
             lv_area_t nav, grid;
             lv_obj_update_layout(id(home_page)->obj);
             lv_obj_get_coords(id(page_next), &nav);
@@ -4632,6 +4634,9 @@ script:
                 id(display_dimmed) = true;
                 id(apply_screen_settings).execute();
                 if (screen_settings::current.home_on_standby) {
+                  // Runtime detail cards live above the tile grid, so paging alone cannot close them.
+                  runtime_tiles::hide_detail();
+                  id(active_entity).clear();
                   id(tile_page) = 0;
                   id(show_tile_page).execute();
                 }
diff --git a/packages/guition.yaml b/packages/guition.yaml
index 5d3bd4f..98ed026 100644
--- a/packages/guition.yaml
+++ b/packages/guition.yaml
@@ -2,7 +2,7 @@
 # Guition ESP32-S3-4848S040 / 4-inch EU wallbox, 480x480 IPS + GT911.
 # Use guition-device.yaml; see docs/GUITION.md. CYD hardware is a separate profile.
 substitutions:
-  SCREEN_FIRMWARE_VERSION: "0.2.1"
+  SCREEN_FIRMWARE_VERSION: "0.2.2"
   DYNAMIC_TILES: "true"
   DASHBOARD_INBOX_INTERNAL: "false"
   DEVICE_NAME: "guition-new"
@@ -769,6 +769,8 @@ api:
               cfg.night_enabled, cfg.night_start, cfg.night_end, cfg.night_brightness,
               cfg.show_clock, cfg.clock_24h, cfg.home_on_standby,
               (unsigned)(millis() - id(last_touch_ms)), id(display_dimmed));
+            ESP_LOGI("ui_diag", "navigation page=%d runtime_detail=%d", id(tile_page),
+              runtime_tiles::detail_root && !lv_obj_has_flag(runtime_tiles::detail_root, LV_OBJ_FLAG_HIDDEN));
             lv_area_t nav, grid;
             lv_obj_update_layout(id(home_page)->obj);
             lv_obj_get_coords(id(page_next), &nav);
@@ -4502,6 +4504,9 @@ script:
                 id(display_dimmed) = true;
                 id(apply_screen_settings).execute();
                 if (screen_settings::current.home_on_standby) {
+                  // Runtime detail cards live above the tile grid, so paging alone cannot close them.
+                  runtime_tiles::hide_detail();
+                  id(active_entity).clear();
                   id(tile_page) = 0;
                   id(show_tile_page).execute();
                 }
diff --git a/screen_manager/CHANGELOG.md b/screen_manager/CHANGELOG.md
index f447279..983e9ac 100644
--- a/screen_manager/CHANGELOG.md
+++ b/screen_manager/CHANGELOG.md
@@ -1,3 +1,7 @@
+## 0.2.2
+
+- Firmware: terug naar pagina 1 bij standby sluit nu ook runtime-detailkaarten, waaronder vacuum, historie en media. Installeer hiervoor de nieuwe schermfirmware via Firmware & USB.
+
 ## 0.2.1
 
 - Algemene instellingen en Inspector direct bovenaan bereikbaar.
diff --git a/screen_manager/config.yaml b/screen_manager/config.yaml
index ab4a6cd..b8ae875 100644
--- a/screen_manager/config.yaml
+++ b/screen_manager/config.yaml
@@ -1,5 +1,5 @@
 name: ESP Screen Manager
-version: "0.2.1"
+version: "0.2.2"
 slug: esp_screen_manager
 description: Kies tegels voor je CYD en Guition touchscreen, zonder opnieuw flashen.
 url: https://github.com/MaxGramser/homeassistant_espscreen