Add the Elecrow CrowPanel 7.0" as a third board, and take the packages and the add-on from Gitea (0.2.93)

A board file for the Elecrow CrowPanel 7.0" (DIS08070H, ESP32-S3-WROOM-1-N4R8): 800x480 through mipi_rgb, GT911 on the
ESP32-S3's USB pins (elecrow_usb_phy.h frees them, behind a flag only this board sets), the Guition's vertical sizes
across a wider page, no rotation. Its 4 MB of flash take the CYD's budget: a partition table of the component's
(smart_display: partitions: 4mb_wide_slots, 1,984 KB slots), the icon fonts at 2 bits a pixel and the TLS client only
bring the firmware to 1,865,440 bytes, 91.8 % of a slot, with camera images kept. docs/ELECROW.md has the numbers and
the trade.

The add-on reads a large board's name from the type sensor's value, the editor offers the board under New screen and
draws the wide preview, tools/check.sh builds it with the budget, render_topbar and capture_ui take the panel's size.
Firmware 0.2.79; the CYD image is unchanged (1,633,760 bytes).

This fork builds from gittea.trippedonmy.name/Xandrossian/homeassistant_espscreen: the packages, the fonts, the
component and the add-on repository point there instead of GitHub.

README.md

@@ -15,7 +15,7 @@ Thank you! I work on this project with a lot of love, and every bit of support h
 panel costs a fraction of that, sits on a table or in a wall box, and is always at hand for the
 lights, the heating or the vacuum.
 
-**What.** Firmware for two affordable panels, the 2.8-inch CYD and the 4-inch Guition, with up to
+**What.** Firmware for three affordable panels, the 2.8-inch CYD, the 4-inch Guition and the 7-inch Elecrow CrowPanel, with up to
 48 tiles over eight pages: lights, climate, blinds and curtains, the vacuum, media, the weather,
 history graphs, clocks and timers, and on a Guition your cameras. A tile can take the whole page, one big switch you push without
 looking, and a tile can go to another page. An automation can put an alert on every screen when someone rings
@@ -227,7 +227,7 @@ For Home Assistant OS with Apps/Add-ons on **aarch64 or amd64**:
 2. Install **ESP Screen Manager**, start the app, and open **ESP Screens**.
    ESPHome Device Builder is optional: the ESPHome CLI is already in this app.
 3. Connect the screen with a USB data cable to the **Home Assistant machine**
-   and choose **New screen** in the sidebar: CYD or Guition, a name, the USB port, and
+   and choose **New screen** in the sidebar: CYD, Guition or Elecrow CrowPanel 7.0", a name, the USB port, and
    **Install**. If Wi-Fi is missing from the ESPHome `secrets.yaml`, the window
    asks for it once and ESP Screens only adds the missing lines. The profile
    with unique API and OTA keys goes into the ESPHome folder; the build
@@ -237,7 +237,7 @@ For Home Assistant OS with Apps/Add-ons on **aarch64 or amd64**:
    Choose **Download** under **Install via**: ESP Screens builds the firmware, and you put it
    on the screen from your own computer with [ESPHome Web](https://web.esphome.io) in Chrome
    or Edge. After that, updates go over Wi-Fi as usual.
-4. **CYD:** go through the calibration on the screen. **Guition:** uses GT911
+4. **CYD:** go through the calibration on the screen. **Guition and Elecrow:** use GT911
    without resistive calibration. Then pair the discovered ESPHome device in
    **Settings → Devices & services** using the API key the window
    shows after installation (copy button). Grant the device permission to