Xandrossian/homeassistant_espscreen
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Add the Elecrow CrowPanel 7.0" as a third board, and take the packages and the add-on from Gitea (0.2.93)
CI / checks (push) Successful in 12m50s
Details
CI / firmware (add-on) (push) Successful in 18m19s
Details
CI / firmware (min_version) (push) Successful in 17m55s
Details

Browse Source 
A board file for the Elecrow CrowPanel 7.0" (DIS08070H, ESP32-S3-WROOM-1-N4R8): 800x480 through mipi_rgb, GT911 on the
ESP32-S3's USB pins (elecrow_usb_phy.h frees them, behind a flag only this board sets), the Guition's vertical sizes
across a wider page, no rotation. Its 4 MB of flash take the CYD's budget: a partition table of the component's
(smart_display: partitions: 4mb_wide_slots, 1,984 KB slots), the icon fonts at 2 bits a pixel and the TLS client only
bring the firmware to 1,865,440 bytes, 91.8 % of a slot, with camera images kept. docs/ELECROW.md has the numbers and
the trade.

The add-on reads a large board's name from the type sensor's value, the editor offers the board under New screen and
draws the wide preview, tools/check.sh builds it with the budget, render_topbar and capture_ui take the panel's size.
Firmware 0.2.79; the CYD image is unchanged (1,633,760 bytes).

This fork builds from gittea.trippedonmy.name/Xandrossian/homeassistant_espscreen: the packages, the fonts, the
component and the add-on repository point there instead of GitHub.
This commit is contained in:
Xandrossian
2026-09-20 23:18:01 -07:00
parent efbab04b39
commit 9857cc3bda
64 changed files with 1664 additions and 145 deletions
Download Patch File Download Diff File Expand all files Collapse all files
docs/EASY_SETUP.md
+4 -3
View File
@@ -15,6 +15,7 @@ ESPHome Device Builder is optional:
| --- | --- |
| CYD | ESP32-2432S028, 320×240, ILI9341 and XPT2046 |
| Guition | ESP32-S3-4848S040, 480×480, ST7701S and GT911 |
| Elecrow CrowPanel 7.0" | DIS08070H, ESP32-S3-WROOM-1-N4R8, 800×480 RGB and GT911 ([ELECROW.md](ELECROW.md)) |
Other screens with roughly the same name can have different pins. Use
the board profile that matches the hardware. Use a USB cable that supports data.
@@ -38,8 +39,8 @@ Use the GitHub version for updates; a local test add-on is a separate app.
1. Connect the screen with a **USB data cable** to the machine running Home
Assistant. With multiple boards: connect them one at a time for the first
installation, or check which port belongs to this screen.
2. Click **New screen** in the sidebar of ESP Screens, under your screens. Choose CYD
or Guition and give the screen a name, for example `Kitchen`. The device name
2. Click **New screen** in the sidebar of ESP Screens, under your screens. Choose CYD,
Guition or Elecrow CrowPanel and give the screen a name, for example `Kitchen`. The device name
(`kitchen`) follows from that; use **customize** to choose a different one.
3. Wi-Fi: if `wifi_ssid` and `wifi_password` are already in the ESPHome `secrets.yaml`,
the screen uses them automatically. If they're missing, or the file doesn't
@@ -88,7 +89,7 @@ and survives OTA updates. Use the HA device button **Calibrate touch** to
measure again later. For a panel that stays off, or for a measurement report over
USB, see [CALIBRATING.md](CALIBRATING.md).
**Guition:** the GT911 touch mapping is baked into the board profile; there's no ADC calibration.
**Guition and Elecrow:** the GT911 touch mapping is baked into the board profile; there's no ADC calibration.
## 3. Pair the screen with Home Assistant