Add the Elecrow CrowPanel 7.0" as a third board, and take the packages and the add-on from Gitea (0.2.93)

A board file for the Elecrow CrowPanel 7.0" (DIS08070H, ESP32-S3-WROOM-1-N4R8): 800x480 through mipi_rgb, GT911 on the
ESP32-S3's USB pins (elecrow_usb_phy.h frees them, behind a flag only this board sets), the Guition's vertical sizes
across a wider page, no rotation. Its 4 MB of flash take the CYD's budget: a partition table of the component's
(smart_display: partitions: 4mb_wide_slots, 1,984 KB slots), the icon fonts at 2 bits a pixel and the TLS client only
bring the firmware to 1,865,440 bytes, 91.8 % of a slot, with camera images kept. docs/ELECROW.md has the numbers and
the trade.

The add-on reads a large board's name from the type sensor's value, the editor offers the board under New screen and
draws the wide preview, tools/check.sh builds it with the budget, render_topbar and capture_ui take the panel's size.
Firmware 0.2.79; the CYD image is unchanged (1,633,760 bytes).

This fork builds from gittea.trippedonmy.name/Xandrossian/homeassistant_espscreen: the packages, the fonts, the
component and the add-on repository point there instead of GitHub.

tools/check.sh

@@ -4,7 +4,7 @@
 #
 #   tools/check.sh                   the Python tests, every tests/*.cpp, the package check, the icon generator's --check, the editor's
 #                                    tests, types and build, and whether the editor bundle in Git equals that build
-#   tools/check.sh --firmware        compiles both board profiles and applies the CYD's flash budget
+#   tools/check.sh --firmware        compiles every board profile and applies the flash budget to the 4 MB boards (CYD, Elecrow)
 #   tools/check.sh --all             both
 #   --baseline BYTES                 with --firmware: the CYD image of the last release, to print the growth
 #
@@ -175,8 +175,8 @@ api_encryption_key: "Y2hlY2stYnVpbGQtcGxhY2Vob2xkZXIta2V5LTMyYnk="
 ota_password: "check-build-ota-password-0000000"
 ap_password: "check-ap-passwd0"
 EOF
-  for board in cyd guition; do
-    file=$([[ $board == cyd ]] && echo home-like-2432s028.yaml || echo guition-4848s040.yaml)
+  for board in cyd guition elecrow; do
+    case $board in cyd) file=home-like-2432s028.yaml ;; guition) file=guition-4848s040.yaml ;; elecrow) file=elecrow-crowpanel7.yaml ;; esac
     cp "$ROOT/$file" "$config/check-$board.yaml" || return 1
     if ! grep -q '^captive_portal:' "$config/check-$board.yaml" || ! grep -q '^  ap:' "$config/check-$board.yaml"; then
       echo "$file has no captive_portal: or wifi ap: any more, unlike the YAML users get; the flash figures would read low."
@@ -186,16 +186,16 @@ EOF
   echo "Check profiles in $config"
 }
 
-compile_board() {  # compile_board cyd|guition
+compile_board() {  # compile_board cyd|guition|elecrow
   local board=$1
   cd "$WORK/config" || return 1
   "${ESPHOME_CMD[@]}" -s DEVICE_NAME "check-$board" -s DEVICE_FRIENDLY_NAME "Check $board" compile "check-$board.yaml" || return 1
   flash_report "$board"
 }
 
-# flash_report BOARD [budget]: the image against its update slot, both read from the build, and on the CYD the growth
-# against --baseline and the budget of docs/RELEASING.md step 2. Exit 3 means over 90 %: it passes, but the release has
-# to say why.
+# flash_report BOARD [budget]: the image against its update slot, both read from the build, and on the 4 MB boards (the
+# CYD, the Elecrow) the growth against --baseline (the CYD only) and the budget of docs/RELEASING.md step 2. Exit 3 means
+# over 90 %: it passes, but the release has to say why.
 flash_report() {
   local board=$1 mode=${2:-} status=0 out="$WORK/flash-$1.txt" against=""
   [[ $board == cyd ]] && against=$baseline
@@ -251,6 +251,7 @@ EOF
 }
 
 cyd_budget() { flash_report cyd budget; }
+elecrow_budget() { flash_report elecrow budget; }
 
 # ---- Run ----
 
@@ -282,6 +283,8 @@ if ((want_firmware)); then
     run "Firmware: CYD" compile_board cyd
     if ((last_ok)); then run "CYD flash budget" cyd_budget; else skip "CYD flash budget" "no CYD build"; fi
     run "Firmware: Guition" compile_board guition
+    run "Firmware: Elecrow" compile_board elecrow
+    if ((last_ok)); then run "Elecrow flash budget" elecrow_budget; else skip "Elecrow flash budget" "no Elecrow build"; fi
   else
     skip "Firmware builds" "ESPHome or the check profiles are missing"
   fi

tools/i18n.py

@@ -200,7 +200,7 @@ LINT_KEEP = {
     'None', 'Auto', 'Wh',
     # Placeholders of the YAML tree that the runtime tiles replace before a screen shows them, and profile defaults.
     'Lamp', 'Plug', 'Evening', 'All off', 'AC', 'Vacuum', 'Tile 7', 'Tile 8', 'Tile 9', 'Tile 10', 'Light', 'Light Color',
-    'Climate', 'Example lamp', 'My CYD', 'My Guition',
+    'Climate', 'Example lamp', 'My CYD', 'My Guition', 'My CrowPanel',
 }
 LINT_FILES = ('components/smart_display/*.h', 'packages/core.yaml', 'packages/boards/*.yaml')
 

tools/profiles.py

@@ -1,7 +1,8 @@
 """The board profiles as the tests and tools read them (app 0.2.84+).
 
 A screen is three files: an entry (`home-like-2432s028.yaml` or `packages/cyd.yaml` for a CYD, `guition-4848s040.yaml`
-or `packages/guition.yaml` for a Guition), `packages/core.yaml` that every board shares, and the board's own file under
+or `packages/guition.yaml` for a Guition, `elecrow-crowpanel7.yaml` or `packages/elecrow.yaml` for an Elecrow CrowPanel 7.0"),
+`packages/core.yaml` that every board shares, and the board's own file under
 `packages/boards/`. `text(name)` is the three of them one after the other, so a check that looks for a line finds it
 wherever it lives; `resolved(name)` also fills in the `${NAME}` substitutions from the three files (the sizes, the fonts
 and the hooks with the board's code), for a check that needs the numbers or the whole lambda. Neither is what ESPHome
@@ -15,12 +16,13 @@ import yaml
 
 ROOT = Path(__file__).resolve().parents[1]
 CORE = ROOT / 'packages/core.yaml'
-BOARDS = {'cyd': ROOT / 'packages/boards/cyd-2432s028.yaml', 'guition': ROOT / 'packages/boards/guition-4848s040.yaml'}
-ENTRIES = {'home-like-2432s028.yaml': 'cyd', 'guition-4848s040.yaml': 'guition',
-           'packages/cyd.yaml': 'cyd', 'packages/guition.yaml': 'guition'}
-# The names the four entry files are known by, in the order the older tests listed them.
-PROFILES = ('home-like-2432s028.yaml', 'guition-4848s040.yaml')
-PACKAGES = ('packages/cyd.yaml', 'packages/guition.yaml')
+BOARDS = {'cyd': ROOT / 'packages/boards/cyd-2432s028.yaml', 'guition': ROOT / 'packages/boards/guition-4848s040.yaml',
+          'elecrow': ROOT / 'packages/boards/elecrow-crowpanel7.yaml'}
+ENTRIES = {'home-like-2432s028.yaml': 'cyd', 'guition-4848s040.yaml': 'guition', 'elecrow-crowpanel7.yaml': 'elecrow',
+           'packages/cyd.yaml': 'cyd', 'packages/guition.yaml': 'guition', 'packages/elecrow.yaml': 'elecrow'}
+# The names the six entry files are known by, in the order the older tests listed them.
+PROFILES = ('home-like-2432s028.yaml', 'guition-4848s040.yaml', 'elecrow-crowpanel7.yaml')
+PACKAGES = ('packages/cyd.yaml', 'packages/guition.yaml', 'packages/elecrow.yaml')
 NAMES = PROFILES + PACKAGES
 
 

tools/render_topbar.py

@@ -20,14 +20,16 @@ from pathlib import Path
 
 ROOT = Path(__file__).resolve().parents[1]
 WORK = ROOT / '.esphome' / 'render-topbar'
-PROFILES = {'guition': 'guition-4848s040.yaml', 'cyd': 'home-like-2432s028.yaml'}
+PROFILES = {'guition': 'guition-4848s040.yaml', 'cyd': 'home-like-2432s028.yaml', 'elecrow': 'elecrow-crowpanel7.yaml'}
 sys.path.insert(0, str(ROOT / 'tools'))
 import profiles  # noqa: E402
 FONTS = ('headline', 'time_label', 'sublabel_big', 'label', 'materialdesign_icons', 'materialdesign_icons_mini')
 # Hardware headers the host cannot compile; the top bar needs none of them.
 SKIP = {'guition_diagnostics.h', '__pycache__'}
-# Header band per board: page width and height above the tiles.
-BANDS = {'guition': (480, 72), 'cyd': (320, 40)}
+# Header band per board: page width and height above the tiles. The Elecrow's bar is the Guition's across 800 px
+# (the same fonts and insets), so it renders with the Guition's fonts.
+BANDS = {'guition': (480, 72), 'cyd': (320, 40), 'elecrow': (800, 72)}
+LARGE = ('guition', 'elecrow')
 
 # (slug, title, items) with items as C++ expressions of the render lambda's helpers.
 SCENARIOS = (
@@ -56,8 +58,8 @@ def font_blocks(board):
 
 def band(board, y):
     width, height = BANDS[board]
-    margin, top = (16, 22) if board == 'guition' else (11, 14)
-    tile_y, tile_w, tile_h, col2, radius = (72, 218, 108, 246, 22) if board == 'guition' else (40, 147, 52, 164, 18)
+    margin, top = (16, 22) if board in LARGE else (11, 14)
+    tile_y, tile_w, tile_h, col2, radius = {'guition': (72, 218, 108, 246, 22), 'elecrow': (72, 378, 108, 406, 22), 'cyd': (40, 147, 52, 164, 18)}[board]
     return f'''        - obj:
             id: {board}_page
             x: 0
@@ -85,7 +87,7 @@ def band(board, y):
                   text: ""
                   text_font: time_label_{board}
               - obj:
-                  x: {margin if board == 'guition' else 9}
+                  x: {margin if board in LARGE else 9}
                   y: {tile_y}
                   width: {tile_w}
                   height: {tile_h}
@@ -128,6 +130,7 @@ struct Board {{ const char *name; lv_obj_t *page, *room, *time; const lv_font_t
 std::vector<Board> boards = {{
   {{"guition", id(guition_page), id(guition_room), id(guition_time), id(sublabel_big_guition)->get_lv_font(), id(materialdesign_icons_mini_guition)->get_lv_font()}},
   {{"cyd", id(cyd_page), id(cyd_room), id(cyd_time), id(sublabel_big_cyd)->get_lv_font(), id(materialdesign_icons_mini_cyd)->get_lv_font()}},
+  {{"elecrow", id(elecrow_page), id(elecrow_room), id(elecrow_time), id(sublabel_big_guition)->get_lv_font(), id(materialdesign_icons_mini_guition)->get_lv_font()}},
 }};
 for (auto &scenario : scenarios) {{
   for (auto &board : boards) {{
@@ -200,8 +203,8 @@ display:
   - platform: sdl
     id: sdl_display
     dimensions:
-      width: 480
-      height: 480
+      width: 800
+      height: 540
     auto_clear_enabled: false
     update_interval: never
 
@@ -227,7 +230,7 @@ lvgl:
             points:
               - 0, 0
               - 1, 1
-{band('guition', 0)}{band('cyd', 220)}
+{band('guition', 0)}{band('cyd', 220)}{band('elecrow', 340).replace('headline_elecrow', 'headline_guition').replace('time_label_elecrow', 'time_label_guition')}
 script:
   - id: action_seed
     then:
@@ -254,15 +257,18 @@ def crop_scale(image, width, height, scale):
     return bytes(out)
 
 def sheet(out):
-    """Header bands of every scenario: Guition 2x above CYD 3x, 12 px white between."""
+    """Header bands of every scenario: Guition 2x above CYD 3x above the Elecrow 1x, 12 px white between."""
     width, gap = 960, 12
     rows = []
     for slug, _, _ in SCENARIOS:
-        for board, scale in (('guition', 2), ('cyd', 3)):
+        for board, scale in (('guition', 2), ('cyd', 3), ('elecrow', 1)):
             image = read_ppm(out / f'{slug}-{board}.ppm')
             band_w, band_h = BANDS[board]
             png(out / f'{slug}-{board}.png', image[0], image[1], image[2])
-            rows.append((crop_scale(image, band_w, band_h, scale), band_h * scale))
+            band = crop_scale(image, band_w, band_h, scale)
+            # A band narrower than the sheet (the Elecrow's 800) gets white at its right.
+            pad = bytes([255]) * (width - band_w * scale) * 3
+            rows.append((b''.join(band[y * band_w * scale * 3:(y + 1) * band_w * scale * 3] + pad for y in range(band_h * scale)), band_h * scale))
         rows.append((bytes([255]) * width * 3 * gap * 2, gap * 2))
     height = sum(h for _, h in rows)
     png(out / 'sheet.png', width, height, b''.join(data for data, _ in rows))