Xandrossian/homeassistant_espscreen
0
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Choose vacuum, vac & mop or mop on the vacuum card, and a climate card for the CYD (0.2.46)

Browse Source 
App 0.2.46 / firmware 0.2.39:
- The vacuum's state message carries extras from its own device: the cleaning mode and water
  selects (found by translation key, then entity id ending, so localized ids work), the suction
  speeds to offer, the battery sensor (HA 2026.8 dropped battery_level), charging and the current
  room. Speeds and water levels a mode covers move into the mode row; Custom only while in use.
  The manager watches these entities and resends only the vacuum's message when one changes.
- Vacuum card redesign on both boards: robot with state, battery, charging bolt and room; Start
  (Pause, Resume) and Dock; then segmented rows for mode, suction and water, showing only the rows
  the chosen mode uses. Taps show at once and wait for Home Assistant; Locate is a round button in
  the Guition hero.
- CYD climate card without the arc: big setpoint between large -/+ keys (debounced, hold to
  repeat) and one row of mode keys in HA's order and colours, with a more key for fan and swing.
- Both profiles clear climate_edit_pending when the climate card is closed, instead of running
  ui_refresh every second while the flag stayed set.

Tested with the owner's Roborock S8 on HA 2026.9.1 (live data, OTA-flashed bench boards) and with
host renders of both boards; see docs/TEST_RESULTS_0246.md.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This commit is contained in:
Max Gramser
2026-09-15 15:22:28 +02:00
parent 4ff0d44312
commit aa2137f3f8
23 changed files with 1675 additions and 655 deletions
Download Patch File Download Diff File Expand all files Collapse all files
TILE_CONFIGURATION.md
+9 -8
View File
@@ -47,8 +47,9 @@ vertically, so the grid can be taller than the screen.
The background is a two-stop vertical gradient (`BG_TOP_COLOR` ->
`BG_BOTTOM_COLOR`), not an image. That saves ~150 KB of flash and removes an
image blit from every redraw, which is what makes scrolling usable on this
board. The same gradient is reused as the backdrop of the slider, color and
thermostat overlays through the `style_bg_grad` style.
board. The same gradient is reused as the backdrop of the slider and color
overlays through the `style_bg_grad` style; the climate card uses the plain
light background of the other cards.
## Accent colors are automatic
@@ -167,9 +168,9 @@ Only relevant when `TILE*_TYPE` is set to `"climate"`.
| Key | Default | Description |
|-----|---------|-------------|
| `TILE*_CLIMATE_MIN_TEMP` | `"5.0"` | Minimum target temperature shown in the thermostat overlay. |
| `TILE*_CLIMATE_MAX_TEMP` | `"30.0"` | Maximum target temperature shown in the thermostat overlay. |
| `TILE*_CLIMATE_STEP` | `"0.5"` | Step size for the thermostat ring and +/- buttons. Values below `0.5` are rounded up to `0.5`, so the UI always adjusts in whole or half-degree steps. |
| `TILE*_CLIMATE_MIN_TEMP` | `"5.0"` | Minimum target temperature on the climate card. |
| `TILE*_CLIMATE_MAX_TEMP` | `"30.0"` | Maximum target temperature on the climate card. |
| `TILE*_CLIMATE_STEP` | `"0.5"` | Step size of the − / + keys. Values below `0.5` are rounded up to `0.5`, so the UI always adjusts in whole or half-degree steps. |
| `TILE*_CLIMATE_CURRENT_TEMP_ATTRIBUTE` | `"current_temperature"` | Home Assistant attribute used for the current room temperature. |
| `TILE*_CLIMATE_TARGET_TEMP_ATTRIBUTE` | `"temperature"` | Home Assistant attribute used for the target temperature. |
| `TILE*_CLIMATE_HUMIDITY_ATTRIBUTE` | `"current_humidity"` | Home Assistant attribute used for humidity. Leave the default if the entity does not provide humidity. |
@@ -210,7 +211,7 @@ In all modes, the event `tileN_long_press` is always published to `sensor.smartd
For light tiles in `slider` mode, the brightness overlay automatically shows a color-ring button when `DIRECT_ACTIONS` is `"true"` and Home Assistant reports a supported color mode (`hs`, `rgb`, `rgbw`, `rgbww`, `xy`) or color temperature mode (`color_temp`). The color detail view can send `light.turn_on` with `color_name`, `color_temp_kelvin`, and the current brightness percentage. If the light only supports color or only supports color temperature, the Color/Temp tab switch is hidden and only the supported controls are shown. No extra tile substitutions are required.
For climate tiles in `slider` mode, the thermostat overlay sends `climate.set_temperature` with the configured target temperature. The min/max range, step size, and Home Assistant attribute names are configured through the `TILE*_CLIMATE_*` substitutions. The mode pill cycles through the climate entity's supported `hvac_modes` and sends `climate.set_hvac_mode` when `DIRECT_ACTIONS` is `"true"`.
For climate tiles in `slider` mode, the climate card shows the target temperature between big − / + keys: the number follows every tap at once, holding a key keeps stepping, and one `climate.set_temperature` goes out once the taps stop (0.7 s). The min/max range, step size, and Home Assistant attribute names are configured through the `TILE*_CLIMATE_*` substitutions. Below it, one key per supported `hvac_mode` (in Home Assistant's order, off is the power key) sends `climate.set_hvac_mode` when `DIRECT_ACTIONS` is `"true"`; the ··· key opens the picker with fan and swing modes.
---
@@ -390,7 +391,7 @@ TILE4_LONGPRESS_ACTION_SERVICE: ""
---
### Climate — thermostat ring on long press
### Climate — climate card on long press
```yaml
TILE5_ENTITY: "climate.living_room"
@@ -399,7 +400,7 @@ TILE5_TITLE: "Living"
TILE5_ICON: "\U000F0438" # mdi:radiator
TILE5_TYPE: "climate"
TILE5_TAP_ACTION: "auto" # no default tap action; use TAP_SERVICE if desired
TILE5_LONGPRESS: "slider" # long press opens thermostat ring
TILE5_LONGPRESS: "slider" # long press opens the climate card
TILE5_VALUE_MODE: "auto" # shows target temperature, or current temperature as fallback
TILE5_LABEL_OFF: "Off"
TILE5_LABEL_ON: "Heat"