Choose vacuum, vac & mop or mop on the vacuum card, and a climate card for the CYD (0.2.46)

App 0.2.46 / firmware 0.2.39:
- The vacuum's state message carries extras from its own device: the cleaning mode and water
  selects (found by translation key, then entity id ending, so localized ids work), the suction
  speeds to offer, the battery sensor (HA 2026.8 dropped battery_level), charging and the current
  room. Speeds and water levels a mode covers move into the mode row; Custom only while in use.
  The manager watches these entities and resends only the vacuum's message when one changes.
- Vacuum card redesign on both boards: robot with state, battery, charging bolt and room; Start
  (Pause, Resume) and Dock; then segmented rows for mode, suction and water, showing only the rows
  the chosen mode uses. Taps show at once and wait for Home Assistant; Locate is a round button in
  the Guition hero.
- CYD climate card without the arc: big setpoint between large -/+ keys (debounced, hold to
  repeat) and one row of mode keys in HA's order and colours, with a more key for fan and swing.
- Both profiles clear climate_edit_pending when the climate card is closed, instead of running
  ui_refresh every second while the flag stayed set.

Tested with the owner's Roborock S8 on HA 2026.9.1 (live data, OTA-flashed bench boards) and with
host renders of both boards; see docs/TEST_RESULTS_0246.md.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

screen_manager/app/tile_icons.py

@@ -216,6 +216,8 @@ FIXED = (
     ('weather-pouring', 'F0596'),
     ('weather-snowy-rainy', 'F067F'),
     ('weather-sunset-down', 'F059B'),
+    # "More" key on the CYD climate card: fan and swing (firmware 0.2.39+).
+    ('dots-horizontal', 'F01D8'),
 )
 
 # Pickable icons by name, and every glyph the firmware fonts contain.