Close cards through one path so the page swipe is never left blocked (0.2.32)

Read live on a Guition: every edge swipe was recognised but refused by the
"card open" check, because the light, climate and vacuum cards cleared
their overlay on close (X, tap beside the card, wake from standby) without
forgetting active_entity. One opened card blocked swiping until the next
layout change; the old whole-screen gesture and the CYD had the same gate.
Both boards now close cards through one script, close_cards, which hides
every overlay and clears that state; wake_display uses it too.

The Guition edge swipe now follows LVGL's own pointer events
(lv_indev_add_event_cb: PRESSED begins, PRESSING flips the page and calls
lv_indev_wait_release from inside LVGL) instead of ESPHome's touchscreen
on_update, so the point arrives already rotated. The direction rule is 45
degrees instead of twice as horizontal, and the log now says why a swipe
was refused or how far an unfinished one got. Firmware 0.2.27 for both
boards; the app only moves its target version.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

docs/RELEASING.md

@@ -177,6 +177,17 @@ staan iconen in de browser uit het midden); draai daarna `generate_packages.py`.
 De substituties `MDI_GLYPH_*` zijn vervallen: `TILEn_ICON` in handmatige
 profielen moet uit de set komen. Geen gewijzigde preferences of sleutels.
 
+### Compatibiliteit 0.2.32 / firmware 0.2.27
+
+Alleen firmware. `cyd::EdgeSwipe` werkt op LVGL-pointercoördinaten: `configure(band, travel)`,
+`begin(x, y, width)` met `lv_display_get_horizontal_resolution()`, `update()` met de 45°-regel,
+plus `inward()`/`sideways()` voor het log. De Guition registreert één `lv_indev_add_event_cb`
+(PRESSED/PRESSING/RELEASED) in `on_boot`; de touchscreen-triggers voeden alleen nog de
+`TouchGuard`. Beide bordprofielen krijgen het script `close_cards` (roept
+`runtime_tiles::dismiss()` aan, anders overlays verbergen en `active_entity` wissen); de
+kruisjes en achtergrondtikken van de kaarten en `wake_display` gebruiken het. Protocol, opslag,
+preferences en sleutels ongewijzigd.
+
 ### Compatibiliteit 0.2.31 / firmware 0.2.26
 
 Opslagversie en tegelprotocol blijven 1. `tiles[].slot` is additief: de absolute plek