Show who is at the door: camera images on the Guition (0.2.66)
An alert from esp_screens_show_alert takes a `camera` (a camera.* or image.* entity): a Guition with firmware 0.2.57 shows that moment's picture across the top of the card, and a tap opens the camera full screen. A camera or image tile opens the same full-screen view, refreshed every four seconds at a steady pace. ESP Screen Manager fetches the snapshot with its own access, sizes it for the screen and serves a 24-bit BMP under a random, short-lived link on port 8098; the screen loads it with ESPHome's online_image and holds no Home Assistant token. BMP because ESPHome decodes it per chunk, where a full-screen JPEG held the loop 0.6 s. The CYD keeps its alerts without the picture and gets no camera tiles. The Guition also builds with ESPHome 2026.8+ again: backlight_fade.h derived from ESPHome's LEDC output, which 2026.8 made final, so the backlight now dims through ESPHome's own light transition. Tested on the bench boards and a local add-on on the Home Assistant Yellow; docs/TEST_RESULTS_0266.md. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This commit is contained in:
+1
-1
@@ -18,7 +18,7 @@
|
||||
############################################################
|
||||
|
||||
substitutions:
|
||||
SCREEN_FIRMWARE_VERSION: "0.2.56"
|
||||
SCREEN_FIRMWARE_VERSION: "0.2.57"
|
||||
# A tap survives a finger that drifts up to this far (320 px over 58 mm: 1 cm); further is a swipe.
|
||||
TOUCH_MOVE_LIMIT_PX: "56"
|
||||
# Shortest contact that counts as a tap; a resistive panel bounces, a capacitive one does not.
|
||||
|
||||
Reference in New Issue
Block a user