Take a slider let go within a centimetre of the glass edge as its end, because the panel loses a finger swiped off the screen before the slider's end (0.2.80)

A fast swipe off the right side of a Guition ended at 93-98 %: the GT911 reports the finger for the last time 33-48 px inside the edge while a wide tile's slider ends 29 px from it, and LVGL keeps the last point it saw. cyd::edge_snap() takes a release inside the band (SLIDER_EDGE_SNAP_PX: Guition 67, CYD 56) as the end that lies in that band, for the tile sliders and the light card's sliders; the log names each snap. App 0.2.80, firmware 0.2.67.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>

screen_manager/CHANGELOG.md

@@ -1,3 +1,10 @@
+## 0.2.80 (firmware 0.2.67)
+
+A slider swiped off the edge of the glass goes all the way.
+
+- **Swiping a slider off the screen sets it to the end.** A fast swipe to the right that leaves the glass ended at 93 to 98 % instead of 100 %: a capacitive panel loses a fast finger 30 to 50 px before the edge, and a wide tile's slider ends only 29 px from it, so the screen never saw the finger past the end (measured on a Guition: the last touch landed 33 to 48 px inside the edge, seven times out of seven). A slider whose end lies within about a centimetre of the left or right edge now takes a finger let go in that band as that end: off the right is 100 %, off the left is the minimum (1 % for a light, as in Home Assistant, where a pointer past the bar's end counts as its end too). Letting go anywhere else keeps the exact value. Tile sliders and the sliders on the light card do this; `SLIDER_EDGE_SNAP_PX` in the board profile sets the band (Guition 67 px, CYD 56 px, 0 turns it off). The log says when it happened (`Let go 39 px from the right edge: slider 973 -> 1000`).
+- Needs firmware 0.2.67: press **Update** on the screen. Includes everything from 0.2.79. CYD firmware: 1,652,784 bytes, 90.1 % of the update slot.
+
 ## 0.2.79 (firmware 0.2.66)
 
 A blind's bar reads the same way on the tile and on its card.

screen_manager/app/core.py

@@ -37,7 +37,7 @@ WEEKDAYS = ['Mo', 'Tu', 'We', 'Th', 'Fr', 'Sa', 'Su']
 REPO = 'https://github.com/MaxGramser/homeassistant_espscreen'
 REFS = {'cyd': 'main', 'guition': 'main'}
 # Firmware shipped with this app release; screens below it get an update offer.
-FIRMWARE_VERSION = '0.2.66'
+FIRMWARE_VERSION = '0.2.67'
 # The Auto standby switch a screen offers Home Assistant automations.
 AUTO_STANDBY_MIN_FIRMWARE = '0.2.41'
 # The settings page the screen opens itself, and the screen.settings tile that opens it.

screen_manager/config.yaml

@@ -1,5 +1,5 @@
 name: ESP Screen Manager
-version: "0.2.79"
+version: "0.2.80"
 slug: esp_screen_manager
 description: Choose tiles for your CYD and Guition touchscreen, without reflashing.
 url: https://github.com/MaxGramser/homeassistant_espscreen