A board file for the Elecrow CrowPanel 7.0" (DIS08070H, ESP32-S3-WROOM-1-N4R8): 800x480 through mipi_rgb, GT911 on the
ESP32-S3's USB pins (elecrow_usb_phy.h frees them, behind a flag only this board sets), the Guition's vertical sizes
across a wider page, no rotation. Its 4 MB of flash take the CYD's budget: a partition table of the component's
(smart_display: partitions: 4mb_wide_slots, 1,984 KB slots), the icon fonts at 2 bits a pixel and the TLS client only
bring the firmware to 1,865,440 bytes, 91.8 % of a slot, with camera images kept. docs/ELECROW.md has the numbers and
the trade.
The add-on reads a large board's name from the type sensor's value, the editor offers the board under New screen and
draws the wide preview, tools/check.sh builds it with the budget, render_topbar and capture_ui take the panel's size.
Firmware 0.2.79; the CYD image is unchanged (1,633,760 bytes).
This fork builds from gittea.trippedonmy.name/Xandrossian/homeassistant_espscreen: the packages, the fonts, the
component and the add-on repository point there instead of GitHub.
The add-on ships ESPHome 2026.9.0: it builds an ESP32 with ESP-IDF itself
and keeps a compiler cache. firmware.py gives the CLI its own storage in
/data (ESPHOME_DATA_DIR /data/esphome, which the ESPHome Device Builder no
longer wipes on start; ESP-IDF and ccache in /data/idf, at most 1 GB;
compilers limited to the core count as PlatformIO ran them), removes the
unused PlatformIO once before the first ESP-IDF build, and leaves the new
folders out of backups.
Firmware 0.2.75: assertion_level SILENT in every board's esp32 block, the
core logs from INFO, and clock_parts() in runtime_model.h replaces sscanf.
timer_left() caps a running timer at its duration (the screen's clock runs
up to a second behind Home Assistant's). The packages keep min_version
2026.6.2, the top-level online_image and OTA passwords for new screens, so
an add-on or Device Builder that isn't updated yet keeps building every
screen; CI now builds both boards with the add-on's ESPHome and with
min_version. ESP-IDF's error names stay on, and build_flags stay under
platformio_options, because ESPHome 2026.9's LVGL reads only those.
tools/check.sh: 478 Python tests, 19/19 C++, editor; --firmware PASS with
ESPHome 2026.6.2 (CYD 87.7 %), 2026.8.1 (88.3 %) and 2026.9.0 (86.4 %,
was 91.5 %). Both bench screens OTA'd and watched for half an hour;
ESP Screens as a local add-on on the Yellow built both profiles
(CYD 1,037 s first build, 41 s unchanged). Details:
docs/TEST_RESULTS_0289.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The two board profiles (5,000 lines each, 87 % the same text) become packages/core.yaml and one file per
board under packages/boards/: the hardware, a table of 84 sizes and font sizes, 18 hooks with the lines of C++
only that board adds inside a shared lambda, and the board's own sections. packages/cyd.yaml and
packages/guition.yaml keep their names and places (a screen installed from ESP Screens builds as before);
home-like-2432s028.yaml and guition-4848s040.yaml become the same entries for a checkout.
The firmware stays 0.2.70: the C++ ESPHome generates for each board, through the checkout profile and
through the GitHub package route, was compared line by line with the old profiles' (docs/TEST_RESULTS_0284.md).
tools/check_packages.py replaces tools/generate_packages.py; tools/profiles.py gives the tests and tools the
three files as one; docs/PROFILES.md says how the files fit together and how a board is added.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A test and code-analysis round of 0.2.72 to 0.2.76 (suites at every tag, sanitizers, ESP32 and GitHub builds, host
harnesses on both boards, the editor in a browser, best practice checked against ESPHome, LVGL, Home Assistant and
Vue) found these, fixed here with Max's choices for the product questions:
- Firmware 0.2.65: the second hand of a single analog clock moves again; on a page that is one full on/off tile the
waking push also switches it; on the Guition a flick is never a tap and a finger that slides off a tile doesn't tap
it; Previous/Next react to a firm press; the same Go to page tile may sit on several pages; a layout the screen has
no memory for is refused instead of crashing; 64-bit redraw mask for 48 tiles; Montserrat 14 no longer built.
- App: Save refuses a layout too long for one message or too big for eight pages; an offline screen keeps its
firmware version from the device registry; HA refusals reach the editor; 128 KB requests; changelog out of the
live stream; cached hashed assets; tini as init and a clean stop; changelog parsing without asterisks or crashes.
- Editor: clicking the open screen keeps unsaved edits, edits during a save stay unsaved, a Page row and phone
dragging to other pages, repeated page tiles, limits from the server, HA's error messages, a type-checked build.
- tools/check.sh + GitHub Actions + a CYD flash budget; docs match 48 tiles and the new editor.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Xandrossian