A board file for the Elecrow CrowPanel 7.0" (DIS08070H, ESP32-S3-WROOM-1-N4R8): 800x480 through mipi_rgb, GT911 on the
ESP32-S3's USB pins (elecrow_usb_phy.h frees them, behind a flag only this board sets), the Guition's vertical sizes
across a wider page, no rotation. Its 4 MB of flash take the CYD's budget: a partition table of the component's
(smart_display: partitions: 4mb_wide_slots, 1,984 KB slots), the icon fonts at 2 bits a pixel and the TLS client only
bring the firmware to 1,865,440 bytes, 91.8 % of a slot, with camera images kept. docs/ELECROW.md has the numbers and
the trade.
The add-on reads a large board's name from the type sensor's value, the editor offers the board under New screen and
draws the wide preview, tools/check.sh builds it with the budget, render_topbar and capture_ui take the panel's size.
Firmware 0.2.79; the CYD image is unchanged (1,633,760 bytes).
This fork builds from gittea.trippedonmy.name/Xandrossian/homeassistant_espscreen: the packages, the fonts, the
component and the add-on repository point there instead of GitHub.
A single or double-width media player tile takes Display -> Album cover
on a Guition: the cover of what plays in the icon's place, like Home
Assistant's own tile. It rides in the page's strip of 0.2.91: the request
and the answer are the same, a media player is simply among the tiles.
The app fetches a player's picture only when its address changes; a page
with a camera loads at the camera's pace with the cover reused, a page of
media tiles alone loads once, and a new track (the picture's mark in the
state, part of the page's wish) asks again at once. A player without a
picture keeps its icon and is not asked for; the double-width tile keeps
its controls; the tile over the whole page keeps the card's big cover.
Firmware 0.2.78.
Host harness 31 checks (docs/TEST_RESULTS_0292.md). CYD firmware
1,633,760 B, 89.0 %.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Live picture (issue #4): a camera or image tile on a Guition takes
Display -> Live picture with a pace of 15 or 30 s. The camera tiles of a
page share one download: the screen asks ESP Screens for them together
(esphome.screen_camera with tiles, size and bg) and the app serves one
BMP, a strip of squares with the corners rounded over each tile's own
colour; every tile draws its square out of it with LVGL's image offset
(LV_IMAGE_ALIGN_TOP_LEFT: the default centres a taller source). A third
online_image on the Guition holds the strip; it loads after the alert's
picture, a cover and the camera full screen, never under a card, in
standby or under a finger. The strip is served whole every time: ESPHome's
http_request logs a 304 as a failed request. Firmware 0.2.77.
Alert button: esp_screens_show_alert takes action and data; the app
performs the action once when the button's report (esphome.screen_alert,
ok) comes from any screen. show_alert keeps its seven fields, so every
firmware from 0.2.31 has it.
Media card and full-page media tile: a title or artist line that is too
wide rolls by (LV_LABEL_LONG_SCROLL_CIRCULAR) instead of ending in dots.
Full-page tiles are white or their own pastel like every other tile; the
tint in the state colour of firmware 0.2.62 to 0.2.76 is gone.
Host harness (27 checks) and bench Guition + local add-on on the Yellow:
docs/TEST_RESULTS_0291.md. CYD firmware 1,633,728 B, 89.0 %.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
packages/core.yaml sets wifi: power_save_mode: none. ESPHome merges it
under the screen's own wifi: block, which keeps the network, the password
and the hotspot, and the screen's own YAML still wins on the mode. The
YAML ESP Screens writes has had the line since app 0.2.24; screens with
an older or hand-written YAML ran ESPHome's ESP32 default light, and
their messages from Home Assistant waited 76-117 ms on the bench.
esphome config on the bench screens' Device Builder YAMLs: NONE for both
without a line of their own, LIGHT when the YAML says light. The bench
Guition, flashed from its Device Builder YAML: ping 15 ms average instead
of 117 ms. tools/check.sh: 474 Python tests (a new one keeps the core's
wifi: block to this one key), 19/19 C++, editor; firmware unchanged in
size (CYD 1,678,816 B, 91.5 %; Guition 2,055,280 B), since the checkout
profiles already had the line.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Starting screen: until the first layout, render() keeps the status text
("Connecting to Home Assistant", "Waiting for ESP Screens") and a spinner
as one block in the middle of the page; the first layout deletes both.
The room label stays empty meanwhile, and ROOM_NAME defaults to "".
Camera: the full screen shows a spinner instead of "Loading image". The
screen asks when the camera opens and loads a link as soon as it comes
(camera_load, never under a finger) instead of waiting for the 250 ms
tick twice, and online_image reads 16 KB per loop instead of 4 KB. On the
bench Guition with the EZVIZ camera: cold 5.8 -> 4.55 s, warm 3.4 -> 2.06 s.
Alert picture: the image takes the frame's radius (18, the alert card's);
LVGL's software renderer clips it row by row, without a layer.
One spinner_create() makes the busy sheet's, the starting screen's and the
camera's spinner; theme role CAMERA_TRACK colours the camera's ring. The
README gets a row of camera pictures; docs/CAMERA.md, RELEASING.md and
TEST_RESULTS_0287.md describe the measurements.
Checked with tools/check.sh (473 Python tests, 19/19 C++, editor) and
--firmware: CYD 1,678,816 B (91.5 %, +1,312 B), Guition 2,055,280 B
(25.3 %). Host renders of both boards in both looks; four OTA builds on
the bench Guition Wallbox, which runs this firmware.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The two board profiles (5,000 lines each, 87 % the same text) become packages/core.yaml and one file per
board under packages/boards/: the hardware, a table of 84 sizes and font sizes, 18 hooks with the lines of C++
only that board adds inside a shared lambda, and the board's own sections. packages/cyd.yaml and
packages/guition.yaml keep their names and places (a screen installed from ESP Screens builds as before);
home-like-2432s028.yaml and guition-4848s040.yaml become the same entries for a checkout.
The firmware stays 0.2.70: the C++ ESPHome generates for each board, through the checkout profile and
through the GitHub package route, was compared line by line with the old profiles' (docs/TEST_RESULTS_0284.md).
tools/check_packages.py replaces tools/generate_packages.py; tools/profiles.py gives the tests and tools the
three files as one; docs/PROFILES.md says how the files fit together and how a board is added.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A download shares ESPHome's loop with touch and drawing. An alert already
closes every card, and the card's cover with it; a media tile over the whole
page stays under the alert. Its cover now waits while the alert's picture is
announced, loading or due for a retry, and an alert picture that arrives while
a cover is on its way (or a dropped cover's download is still being closed)
starts right after it. The host harness checks all three cases on the Guition.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The card behind a media tile shows the album cover, the title, the artist and
the album, a progress bar that runs while the track plays with the times at its
ends, round keys for previous, play or pause and next, and a volume row with a
mute key, a wide slider and the percentage. Keys the player lacks stay faded,
an off player shows one power key, a stream without a length shows no bar, and
the CYD shows the player's icon in the cover's place. A media tile over the
whole page is the same card under the tile's head. media_card.h holds the
geometry, tests/test_media_card.cpp checks every shape.
The cover comes the way camera images do: the screen asks with the size and
the colour behind the corners, the app fetches the picture from Home Assistant,
cuts it square, rounds the corners over that colour and serves it on port 8098;
the Guition loads it once and asks again only when the picture's mark in the
state changes. Firmware 0.2.64.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
An alert from esp_screens_show_alert takes a `camera` (a camera.* or image.* entity): a Guition with firmware
0.2.57 shows that moment's picture across the top of the card, and a tap opens the camera full screen. A camera
or image tile opens the same full-screen view, refreshed every four seconds at a steady pace.
ESP Screen Manager fetches the snapshot with its own access, sizes it for the screen and serves a 24-bit BMP
under a random, short-lived link on port 8098; the screen loads it with ESPHome's online_image and holds no
Home Assistant token. BMP because ESPHome decodes it per chunk, where a full-screen JPEG held the loop 0.6 s.
The CYD keeps its alerts without the picture and gets no camera tiles.
The Guition also builds with ESPHome 2026.8+ again: backlight_fade.h derived from ESPHome's LEDC output, which
2026.8 made final, so the backlight now dims through ESPHome's own light transition.
Tested on the bench boards and a local add-on on the Home Assistant Yellow; docs/TEST_RESULTS_0266.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Xandrossian