A board file for the Elecrow CrowPanel 7.0" (DIS08070H, ESP32-S3-WROOM-1-N4R8): 800x480 through mipi_rgb, GT911 on the
ESP32-S3's USB pins (elecrow_usb_phy.h frees them, behind a flag only this board sets), the Guition's vertical sizes
across a wider page, no rotation. Its 4 MB of flash take the CYD's budget: a partition table of the component's
(smart_display: partitions: 4mb_wide_slots, 1,984 KB slots), the icon fonts at 2 bits a pixel and the TLS client only
bring the firmware to 1,865,440 bytes, 91.8 % of a slot, with camera images kept. docs/ELECROW.md has the numbers and
the trade.
The add-on reads a large board's name from the type sensor's value, the editor offers the board under New screen and
draws the wide preview, tools/check.sh builds it with the budget, render_topbar and capture_ui take the panel's size.
Firmware 0.2.79; the CYD image is unchanged (1,633,760 bytes).
This fork builds from gittea.trippedonmy.name/Xandrossian/homeassistant_espscreen: the packages, the fonts, the
component and the add-on repository point there instead of GitHub.
A thank-you line and the yellow Buy me a coffee button under both titles,
drawn by Buy Me a Coffee's own button image so it shows on GitHub and in the
Home Assistant add-on store, where a script tag does not run.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Max asked for many more tiles, a tile that takes the whole page as a light
switch you push without looking, and tiles that go to a page. The limit is
one tile per slot of the eight pages, 48, and the firmware keeps its tile
list on the heap sized to the layout (PSRAM on a Guition). A tile's size can
be `full`: one big button that lights up in the state colour while on, or the
double-width card's head with its small slider, direct controls or graph at
the bottom and the value the double-width card had no room for in between;
the clock, the forecast (with an hours strip) and the sun path fill the page.
Navigation tiles are the built-in entities screen.page_1 to screen.page_8:
an arrow or a chosen icon, the name and "Page n", a tap opens that page.
The app sends the three only to firmware 0.2.62+, the editor (the Vue port of
this round by the editor session, 00c9a4e) offers Normal / Double-width /
Full page and "Goes to page", and Claude in Home Assistant gets size: full and
the page tiles. Built-in tiles now send a chosen icon as its codepoint.
Found and fixed by the new host harness before release: the one-second tick
moved the analog clock's second hand (part 18) on a full forecast's hour label
during a page switch and corrupted it. Firmware 0.2.62; both C++ and Python
suites, host harness 37/37 on both boards, hardware pass on both bench boards
in docs/TEST_RESULTS_0274.md.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- README: photos of a Guition at home, both boards with demo layouts, a card gallery,
the alert with the Alerts cheatsheet, New screen and choosing tiles, tile settings next
to the resulting tile, and the top bar sheet. Screen images are rendered from the
firmware's own LVGL code (ESPHome host + SDL) fed by the app's own messages on a demo home.
- App store page (screen_manager/README.md): a photo and the editor via absolute URLs.
- Firmware 0.2.35 only raises SCREEN_FIRMWARE_VERSION so the update path can be tested.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Everything a user sees or reads is now English: both boards' labels,
status replies and logs, the ESP Screens editor and Alerts cheatsheet,
and the README and guides (docs/TILES.md, CALIBRATING.md, ACCEPTANCE.md
and TROUBLESHOOTING.md replace the Dutch file names). Labels follow
Home Assistant's own English names (Heat/Cool modes, Heating/Cooling
actions, Away, Returning to dock, weather conditions), dates use English
abbreviations and the top bar writes numbers the English way. Docs use
HA 2026.9's menu names (Settings -> Apps, App store, Settings -> Tools).
Unused legacy files (home-like.yaml, buttons.yaml, a.out) are removed.
Firmware 0.2.34 names its entities in English. Home Assistant registers
a renamed ESPHome entity under a new entity ID, so the inbox
text.<screen>_tegelinstellingen becomes text.<screen>_tile_settings and
the layout stored under the old ID would be lost. The manager now
recognises the screen by its device, during a run or after a restart,
and moves its layout and update history along; the Update button and
the nightly round follow the screen through the rename. Screens that
still run 0.2.33 or older keep working: both languages are matched.
Main is the only release branch from now on.
Tested on a Home Assistant Yellow (HA 2026.9.1) with both bench boards:
see docs/TEST_RESULTS_0240.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Xandrossian