Live picture (issue #4): a camera or image tile on a Guition takes
Display -> Live picture with a pace of 15 or 30 s. The camera tiles of a
page share one download: the screen asks ESP Screens for them together
(esphome.screen_camera with tiles, size and bg) and the app serves one
BMP, a strip of squares with the corners rounded over each tile's own
colour; every tile draws its square out of it with LVGL's image offset
(LV_IMAGE_ALIGN_TOP_LEFT: the default centres a taller source). A third
online_image on the Guition holds the strip; it loads after the alert's
picture, a cover and the camera full screen, never under a card, in
standby or under a finger. The strip is served whole every time: ESPHome's
http_request logs a 304 as a failed request. Firmware 0.2.77.
Alert button: esp_screens_show_alert takes action and data; the app
performs the action once when the button's report (esphome.screen_alert,
ok) comes from any screen. show_alert keeps its seven fields, so every
firmware from 0.2.31 has it.
Media card and full-page media tile: a title or artist line that is too
wide rolls by (LV_LABEL_LONG_SCROLL_CIRCULAR) instead of ending in dots.
Full-page tiles are white or their own pastel like every other tile; the
tint in the state colour of firmware 0.2.62 to 0.2.76 is gone.
Host harness (27 checks) and bench Guition + local add-on on the Yellow:
docs/TEST_RESULTS_0291.md. CYD firmware 1,633,728 B, 89.0 %.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The airco tile stayed orange while the airco was off. The firmware kept its own
short list of what turns grey and gave an off climate Home Assistant's orange,
but Home Assistant has no colour for a climate that is off: its cards fall back
to the inactive grey. Other tiles had the same fault: an off fan, a closed
blind, a docked robot, a player in standby, an idle script, a paused timer and
a camera that isn't streaming all kept their colour.
Tile::active() is now a port of the frontend's stateActive() for the domains a
tile can show, and every tile that is not active is grey. An airco that is off
reads Off, with the room's temperature when the device reports one, as Home
Assistant's tile does. tile_controls::accent() follows stateColorCss(): alarm
binary sensors red, a battery green, orange or red by its charge, a running
script or timer and a streaming camera amber, the weather per condition, the
sun amber and indigo, someone in a zone blue. Scenes, selects, numbers and
sensors keep their own colour per kind. A full-page tile lights up only for
tiles that can be off (Tile::lights_up), and a closed blind's slider keeps its
colour. The top bar's alarm classes are Home Assistant's eleven.
Checked with tools/check.sh (471 Python tests, 19/19 C++ with 58 state cases
and every colour rule) and compiled for both boards: CYD 1,677,488 B (91.4 %,
+576 B), Guition 2,054,640 B (25.3 %).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Max Gramser