A light that offers effects gets a sparkles key at the top right of its colour
card. It opens a page with a row per thing the lamp offers, all from Home
Assistant: the light's effect and the select entities of its device (a WLED's
colour palette, preset and playlist) with what they are set to, and a slider per
number entity of the device (speed, intensity). Names are Home Assistant's own
English entity translations, icons its frontend's; nothing about a brand is
hardcoded beyond a preferred order of translation keys.
A row opens LVGL's roller with every name Home Assistant lists at that moment,
asked for when the picker opens (esphome.screen_options, answered with
op: options, one page of names per message), the effects alphabetically with
Solid on top. The check key at the top right sends the choice as one action;
the back key sends nothing. A slider sends number.set_value when let go. While
an effect runs, the tile names it instead of the brightness.
Firmware 0.2.70: effects_page.h (built when it opens, gone when it closes),
Extra.effect/option_rows/number_rows, options_request, a hidden roller widget
so ESPHome compiles LVGL's roller, five firmware-only glyphs. App 0.2.83:
light_effects.py, the effect attribute, the device rows in the state message,
card_options_loop. Checked on the host with a virtual finger (35/35 on both
boards) and compiled for both ESP32 boards; CYD 1,675,424 B (91.3 %).
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
GitHub issue #9 asked to drop the Previous/Next bar when Go to page tiles do the navigation and to give the tiles the whole screen. Page buttons is a setting the screen owns (on by default): a row in the Screen group of the settings page, switch.<screen>_page_buttons in Home Assistant, and a row in the editor's Screen settings. Without the bar, and on a screen with one page, place_page moves and sizes the three rows so they reach the bottom margin (Guition 108 -> 122 px, CYD 52 -> 61 px); a card keeps its circle, name and state in its middle and the single analog clock keeps its dial. With page buttons and swiping both off, the editor says where the Go to page tiles lead and which pages that leaves out of reach.
The bar itself: each half of the band under the tiles is one key with an MDI chevron and lights up under a finger, and a dot per page sits between them; the screen's settings page uses the same pager. App 0.2.82, firmware 0.2.69.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A test and code-analysis round of 0.2.72 to 0.2.76 (suites at every tag, sanitizers, ESP32 and GitHub builds, host
harnesses on both boards, the editor in a browser, best practice checked against ESPHome, LVGL, Home Assistant and
Vue) found these, fixed here with Max's choices for the product questions:
- Firmware 0.2.65: the second hand of a single analog clock moves again; on a page that is one full on/off tile the
waking push also switches it; on the Guition a flick is never a tap and a finger that slides off a tile doesn't tap
it; Previous/Next react to a firm press; the same Go to page tile may sit on several pages; a layout the screen has
no memory for is refused instead of crashing; 64-bit redraw mask for 48 tiles; Montserrat 14 no longer built.
- App: Save refuses a layout too long for one message or too big for eight pages; an offline screen keeps its
firmware version from the device registry; HA refusals reach the editor; 128 KB requests; changelog out of the
live stream; cached hashed assets; tini as init and a clean stop; changelog parsing without asterisks or crashes.
- Editor: clicking the open screen keeps unsaved edits, edits during a save stay unsaved, a Page row and phone
dragging to other pages, repeated page tiles, limits from the server, HA's error messages, a type-checked build.
- tools/check.sh + GitHub Actions + a CYD flash budget; docs match 48 tiles and the new editor.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The card behind a media tile shows the album cover, the title, the artist and
the album, a progress bar that runs while the track plays with the times at its
ends, round keys for previous, play or pause and next, and a volume row with a
mute key, a wide slider and the percentage. Keys the player lacks stay faded,
an off player shows one power key, a stream without a length shows no bar, and
the CYD shows the player's icon in the cover's place. A media tile over the
whole page is the same card under the tile's head. media_card.h holds the
geometry, tests/test_media_card.cpp checks every shape.
The cover comes the way camera images do: the screen asks with the size and
the colour behind the corners, the app fetches the picture from Home Assistant,
cuts it square, rounds the corners over that colour and serves it on port 8098;
the Guition loads it once and asks again only when the picture's mark in the
state changes. Firmware 0.2.64.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The tiles draw what Home Assistant reports (a new /api/states answers for the tiles on the page); the ···
menu gets Identify (the screen's own show_alert with flash), Copy layout from another screen, Export and
Import as JSON; the Alerts page opens with Try it (/api/alerts/test, one screen or all); the library filters
by room and hides what is placed, with lit icons for what is on; ⌘K searches screens, entities and actions;
the Update badge lists what's new from the changelog (copied into the image) and a running update shows a
progress bar with the ESPHome stage and the last log line.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The page is now web/ (Vue 3 + Vite + TypeScript), built into screen_manager/app/static
with hashed file names; server.py serves index.html as built and /assets/. The Python
API, the data and the firmware are unchanged. Your screens sit in a sidebar, the pages
of a screen stand next to each other at the screen's own shape, the library sits on the
right, and a tile's settings slide in as a drawer while the mockup stays in view. New
screen, Firmware & USB, Alerts, Override YAML and Settings are pages of their own.
Fonts moved to web/src/assets; the tests read the source through tests/editor_sources.py.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
GitHub issue #8: Home Assistant on a server or virtual machine is out of
reach of the screen. New screen and Firmware & USB get a Download choice:
ESP Screens builds the profile's firmware as always and offers ESPHome's
factory image, which the owner flashes with ESPHome Web in Chrome or Edge.
- Firmware: a download job compiles without uploading; only the image of
the profile's latest successful build in this process is served, a new
job withdraws it, and a build without a factory image fails.
- USB on the Home Assistant machine stays first in both lists, also before
a board is plugged in; Download and Later stay chosen once picked.
- The not-yet-in-Home-Assistant card knows a downloaded screen.
- The device name pattern is valid again under Chrome's v flag.
- Docs: README, DOCS, EASY_SETUP, DOCKER, TROUBLESHOOTING. App only;
firmware stays 0.2.58.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
GitHub issue #7 asked for cover.toggle on tap. ESP Screens now asks Home
Assistant which actions each entity has instead of keeping lists: the editor
offers On / off (covers included), sliders, controls and displays only where
Home Assistant has the action, and refuses only new unsupported settings.
Perform action runs any action Home Assistant offers for the tile's entity,
under its own names and fields; the screen sends it with a call id and says
Refused when Home Assistant refuses. Sensors round by display precision, and
tiles, the top bar, timelines, vacuum chips and the inspector use Home
Assistant's words where they showed raw states. Tiles show Home Assistant's
icons, picked as its frontend does (the fonts grow to 309 glyphs).
Existing screens keep every setting and tap as before: stored layouts load
leniently, legacy taps route the same (1020 combinations), and messages are
byte-identical without Home Assistant's words and icons. Firmware 0.2.58.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
An alert from esp_screens_show_alert takes a `camera` (a camera.* or image.* entity): a Guition with firmware
0.2.57 shows that moment's picture across the top of the card, and a tap opens the camera full screen. A camera
or image tile opens the same full-screen view, refreshed every four seconds at a steady pace.
ESP Screen Manager fetches the snapshot with its own access, sizes it for the screen and serves a 24-bit BMP
under a random, short-lived link on port 8098; the screen loads it with ESPHome's online_image and holds no
Home Assistant token. BMP because ESPHome decodes it per chunk, where a full-screen JPEG held the loop 0.6 s.
The CYD keeps its alerts without the picture and gets no camera tiles.
The Guition also builds with ESPHome 2026.8+ again: backlight_fade.h derived from ESPHome's LEDC output, which
2026.8 made final, so the backlight now dims through ESPHome's own light transition.
Tested on the bench boards and a local add-on on the Home Assistant Yellow; docs/TEST_RESULTS_0266.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Dark mode is a new switch under Brightness on the screen's settings page, in
the Screen settings of ESP Screens and as switch.<screen>_dark_mode in Home
Assistant, so an automation can turn it on at bedtime. The screen changes
look at once, open cards and an alert included, and keeps it after a
restart. The design stays the same: a black page, graphite cards with a
hairline, soft white text, Home Assistant's state colours where they tell
something, and pastel card colours as deeper versions of themselves.
Every colour the firmware chooses now lives in components/smart_display/
theme.h: roles with a light and a dark value, the named card colours and
Home Assistant's state colours. The board profiles give widgets colourless
shared styles that theme.h fills, so a change of look refills those styles
and draws again what code painted by state. The light look is unchanged
apart from merges below one panel step. Dark mode costs 440 bytes of static
RAM on the CYD, and the LVGL tree of the host build is 416 bytes smaller; tests
keep colours out of every other file.
Comparing a screen that switched looks with one that booted in it also
found two older bugs, now fixed: a settings switch that was on showed its
knob at the left whenever its page was drawn, and the sun card's sunlit
area turned orange after a palette change. Firmware 0.2.54.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Override YAML on a screen edits <name>.local.yaml, a package loaded after
the shared board package. New profiles get an empty one; an existing
profile is attached on the first save without reformatting the file. The
editor validates YAML, refuses the managed sections and substitutions,
and Save & check runs ESPHome's full validation of the complete profile.
The example uses !extend: ESPHome appends package lists instead of
merging them by id, so a bare id added a second display without a
platform and failed the build. An override is 12 KB at most and a
too-large body answers as JSON instead of a bare 413. The sidecar is
written before the profile includes it, and a symlinked sidecar is
refused. Firmware stays 0.2.52.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A sensor, number, binary sensor, person or held switch opens a history card:
a line with round axis steps, clock times and the highest and lowest moment
for numbers, a timeline with the time in each state for on/off, zones and
statuses. The screen asks with esphome.screen_history for 1 hour, 24 hours or
a week; the app answers with one compact history message from the recorder's
statistics or the state changes. A finger on the graph reads the value and
time of that moment at the top while the graph stays as it is. The Guition
weather card starts below its round back button, and the README shows the new
cards and the light and weather cards as they look now.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A tap on a cover now opens a card like Home Assistant's own, in the style
of the climate and vacuum cards: a tall position slider on which the blind
hangs from the top, a tilt slider over slats for venetian blinds, and open,
stop and close keys. The key of the direction the cover moves is filled; a
key that cannot move it further is disabled and stays out of the keys the
card's tick enables. Sliders show their value while dragged and send it on
release. The card offers only what supported_features allows. A
battery-powered blind shows its battery at the top right: the app sends
the device's battery sensor as the extra the vacuum card uses, and adds
current_tilt_position to the attributes.
Checking Studio 1 after its update to firmware 0.2.49 found that a setting
number equal to its initial state 0 (night brightness 0 %) was never
published, so Home Assistant kept it unknown and ESP Screens could not
change it; apply_screen_settings now publishes a number without a state.
The app also took "unavailable" for the device name during the restart
and wrote sensor.esp_screens_unavailable; diagnostics ignore unknown and
unavailable. The editor redraws its tiles, top bar and entity list when
the live stream opened a screen before the first full inventory (a busy
add-on), and loads app.js and style.css by content stamp after Safari kept
an old script.
Checked with 254 Python and 14 C++ tests, generate_packages --check, ESP32
builds of both profiles, and 20 API checks of the card on host builds of
both boards. Firmware 0.2.50.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A code check found that a setting changed on a screen could jump back.
ESP Screen Manager kept its own copy and sent it with every full update:
after a restart of the app or Home Assistant, every hour and after every
save. A change it missed while it or Home Assistant restarted came back
to the old value, a reported setting was lost when save() refused a
layout with a removed entity, and every step of a held - or + on the
screen resent the whole screen.
Firmware 0.2.49 offers every setting as an entity over the existing
preference records (no migration): Night mode, Night starts/ends,
24-hour clock, Back to page 1 and after how long, Back to page 1 on
standby, Swipe between pages and, on the Guition, Rotation, next to the
four numbers and Auto standby. The settings page and every entity write
through settings_screen::set(), which clamps like the page and stores,
applies and reports only a real change. screen_message answers a caller
that asks with its status and layout revision (api.respond). The
settings tile opens without Home Assistant.
The app reads and changes the settings of such a screen through its
entities and leaves them out of the layout message. Older firmware keeps
them with the layout; a setting it reports is stored without the tile
check and not sent back. Pings to screens that can answer learn at once
whether a tile is missing and resend after 30 s instead of 120 s. Layout
sensors come back after a Home Assistant restart, and weather tiles only
ask for the forecasts the entity supports. The editor's settings form is
now three cards with the rows of the screen's own page; a change applies
at once, and an offline screen shows its values as unknown.
Checked with 245 Python and 14 C++ tests, generate_packages --check,
ESP32 builds of both profiles, host-build API tests on both boards, and
a live run against Home Assistant 2026.9.1 with a temporary host device.
Firmware 0.2.49.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A light's colour slider on Studio 1 sometimes sent red on release. Measured
live: an automation with a state trigger on a six-lamp group (no `to:`) set
"Standby after" to its current value after every colour change. The screen
reported the setting, ESP Screen Manager saved the layout and resent layout,
header and every tile state, and the screen drew its whole page again,
reading no touch input meanwhile. The GT911's stray (0, 0) contact then
became the finger's last position, and LVGL 9.5 set the slider from it on
release. Both red commits left 75-85 ms after such a resync.
The app no longer saves or resends a setting event whose value the layout
already has. The four setting numbers return before the preference write
and the event when nothing changed. A layout message that changes nothing
on the screen no longer runs layout_changed() and refresh_all(); the tile
states after it redraw their own tiles. The Guition wraps the LVGL touch
read callback with cyd::GhostTouch, which repeats the previous read for a
pressed (0, 0), and the edge swipe skips that sample too. Both slider
handlers log a jump to an end on release.
Checked with 214 Python and 14 C++ tests, generate_packages --check, and
ESP32 builds of both Easy profiles. Firmware 0.2.47.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Holding the top bar for about a second and a half opens a settings page on the
screen, with a blue line filling along the top edge while you hold. A built-in
screen.settings tile and the esphome.<screen>_open_settings action open it too.
The page is one constexpr table of rows in settings_screen.h: Brightness,
Night, Screen (clock, back to page 1, swiping, rotation) and This screen (name,
address, firmware, Home Assistant, Restart). Toggles flip on a tap, numbers and
times step with -/+ (a held time walks whole hours), a choice cycles in a chip,
and a row that depends on a switch above it is greyed out. The LVGL objects exist
only while the page is open: +608 bytes of RAM and +10.7 KB of flash on the CYD.
A change is saved, applied and reported through the existing screen_setting
event, so ESP Screens shows the same value within a second.
New setting auto_home (default on, 2 minutes): an open card, the settings page
or a later page goes back to page 1 after that long without a touch, not only on
standby. It travels beside the frozen eleven-key settings block with its own
preference, so older firmware and older apps keep working.
docs/SETTINGS.md is the recipe for adding a setting; the Claude skill explains
the page. Firmware 0.2.44.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Four Home Assistant events change a screen the way the app's own editor does:
esp_screens_add_tile (add or change), esp_screens_remove_tile,
esp_screens_move_tile and esp_screens_order_tiles. An event names the screen by
device name, shown name, area or title, and may set the size, the direct
control, the display, the icon, the colour and the spot; a tile with a control
or a forecast becomes double-width by itself. apply_tile_event returns the new
layout and Manager.save does the validating and the pushing, so nothing can get
past the twenty-tile limit, a duplicate entity or an occupied spot.
Every event is answered with esp_screens_tile_result, and every screen publishes
what it shows as sensor.esp_screens_<node>, with the page, row, column, width,
control and display per tile. So an assistant can read a screen before it moves
anything, and a refused event says why and changes nothing.
The Claude skill gains a Tiles section with the events, the fields, what each
kind of entity can do, how to read a screen first, and the rule to show the plan
and wait for a yes.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
App 0.2.46 / firmware 0.2.39:
- The vacuum's state message carries extras from its own device: the cleaning mode and water
selects (found by translation key, then entity id ending, so localized ids work), the suction
speeds to offer, the battery sensor (HA 2026.8 dropped battery_level), charging and the current
room. Speeds and water levels a mode covers move into the mode row; Custom only while in use.
The manager watches these entities and resends only the vacuum's message when one changes.
- Vacuum card redesign on both boards: robot with state, battery, charging bolt and room; Start
(Pause, Resume) and Dock; then segmented rows for mode, suction and water, showing only the rows
the chosen mode uses. Taps show at once and wait for Home Assistant; Locate is a round button in
the Guition hero.
- CYD climate card without the arc: big setpoint between large -/+ keys (debounced, hold to
repeat) and one row of mode keys in HA's order and colours, with a more key for fan and swing.
- Both profiles clear climate_edit_pending when the climate card is closed, instead of running
ui_refresh every second while the flag stayed set.
Tested with the owner's Roborock S8 on HA 2026.9.1 (live data, OTA-flashed bench boards) and with
host renders of both boards; see docs/TEST_RESULTS_0246.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- The app listens for the Home Assistant events esp_screens_show_alert and
esp_screens_dismiss_alert and calls each screen's show_alert/dismiss_alert action,
screens added later included. Fields are typed like Home Assistant's ESPHome action
schema; an unusable value is left empty instead of losing the alert.
- Settings → Claude installs an ESP Screens skill for Claude Code in Home Assistant
(/homeassistant/.claude/skills/esp-screens) or downloads it as a zip for claude.ai.
It is generated from the alert reference, so fields, colors and icons match the firmware.
- New screen, Firmware & USB, firmware updates, Alerts and Claude move to a Settings view;
the header keeps one button. Unselected screens in My screens get a light grey card.
App only; firmware stays 0.2.38.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Everything a user sees or reads is now English: both boards' labels,
status replies and logs, the ESP Screens editor and Alerts cheatsheet,
and the README and guides (docs/TILES.md, CALIBRATING.md, ACCEPTANCE.md
and TROUBLESHOOTING.md replace the Dutch file names). Labels follow
Home Assistant's own English names (Heat/Cool modes, Heating/Cooling
actions, Away, Returning to dock, weather conditions), dates use English
abbreviations and the top bar writes numbers the English way. Docs use
HA 2026.9's menu names (Settings -> Apps, App store, Settings -> Tools).
Unused legacy files (home-like.yaml, buttons.yaml, a.out) are removed.
Firmware 0.2.34 names its entities in English. Home Assistant registers
a renamed ESPHome entity under a new entity ID, so the inbox
text.<screen>_tegelinstellingen becomes text.<screen>_tile_settings and
the layout stored under the old ID would be lost. The manager now
recognises the screen by its device, during a run or after a restart,
and moves its layout and update history along; the Update button and
the nightly round follow the screen through the rename. Screens that
still run 0.2.33 or older keep working: both languages are matched.
Main is the only release branch from now on.
Tested on a Home Assistant Yellow (HA 2026.9.1) with both bench boards:
see docs/TEST_RESULTS_0240.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
App 0.2.39 / firmware 0.2.33, items 1, 2, 4, 5 and 6 of the 30-screen scaling check.
- Only the tiles (and top bar) of changed entities are rebuilt; the screen list is
cached until the registry or a screen diagnostic changes; the SSE stream follows.
- Sensor history comes from one recorder/statistics_during_period call per window in
a background task, with the REST history as fallback per sensor without statistics.
- Firmware 0.2.33 answers a keepalive ping with its layout revision; a mismatch or a
restart asks for the layout again, everything is repeated hourly as a safety net.
- The screen_message API action takes one whole message; the text inbox chunks stay
as fallback for older firmware. A repeated unchanged layout keeps the inbox state.
- Quiet diagnostics: Opgestart (uptime as timestamp) replaces Uptime, heap every
5 min, setting numbers publish only on change.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The name stays on the left; up to six items go on the right: the time, an
analog clock, the date, or a Home Assistant entity with its icon, showing its
state or how long ago it changed, always or only while active. The add-on
formats entity text in Dutch and sends it as op: header right after the layout
to firmware 0.2.32+; older firmware keeps the clock of show_clock, which now
follows the clock item.
The firmware draws every value in one font on the name's baseline, centres
icons and the dial on the digit height and measures gaps between glyph ink, so
the bar looks even; the editor's mockup uses Roboto and the same integer rules.
tools/render_topbar.py renders the real LVGL code on a computer (ESPHome host +
SDL2). The editor's section buttons are gone.
Firmware 0.2.32 for both boards.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Home Assistant shows an ESPHome device action with bare field names and
types only: no description, no dropdowns. The new Alerts button opens a
reference page instead: per screen the exact action names
(esphome.<node>_show_alert and _dismiss_alert) with copy buttons and
whether the firmware is new enough, a paste-ready YAML example per
screen, every field with explanation, example and the byte limits per
board, all icons with glyph and name (searchable, tap copies), the
colour swatches, the behaviour (timeout, button, flash, standby,
replace), and the esphome.screen_alert event with an automation that
waits for the button.
core.alert_reference() carries the data and tests/test_alerts_reference.py
keeps it equal to what both board profiles, tile_palette.h,
alert_overlay.h and tile_icons.py compile. Screens carry alert_action
and dismiss_action in the inventory. App only; firmware stays 0.2.31.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Tiles get an absolute grid slot instead of a packed order: a tile lands exactly
where it is dropped, dropping on another tile swaps the two, everything else
stays put, and empty cells and empty pages persist. The mockup previews the
result while dragging, a new page waits below the last one, "Pagina toevoegen"
keeps an empty page, empty cells accept the next tile from the picker, and the
mouse no longer selects text while dragging.
Storage and protocol stay version 1: `tiles[].slot` (0-47) and `pages` (1-8)
are additive, the layout message carries `slots` and `pages`. Firmware 0.2.26
places tiles on those slots (`place()` next to `pack()`); older firmware packs
in order as before and the editor says so.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
"Nieuw scherm" used to span two dialogs plus a copy/download of the
installation YAML. It is now one dialog: board, name (node name derived,
editable), wifi only when secrets.yaml lacks it, the detected USB port,
and Installeren. The add-on writes the profile with unique API/OTA keys,
merges just the missing wifi lines into secrets.yaml (comments and other
secrets untouched, result re-parsed before writing), then builds and
flashes with the live ESPHome log and stage in the same dialog; a failed
build offers a retry without a second profile. The YAML download
endpoint is gone: the profile already lives in the ESPHome folder.
Pairing happens in Home Assistant itself, so the done view and a sidebar
card per not-yet-paired profile say so, with a button to Apparaten &
diensten, the API key to copy and the reminder to allow HA actions.
One profile per screen; the dialog says that too.
Tests: wifi merge cases, install pre-checks, pending list, profile
metadata; the date-anchored hourly forecast test now follows the clock.
Firmware 0.2.22 stays current.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Since 0.2.20 the manager repeats a layout every 120 s, while the firmware
treated anything older than 95 s (sized for the original 25 s keepalive) as
stale: on a quiet screen every card read "Niet beschikbaar" and the header
"HA niet verbonden" for 25-45 s of each two-minute round, on both boards.
"HA niet verbonden" now follows ESPHome's own api_is_connected(); the feed
watchdog uses the cadence the layout message declares ("keepalive", seconds,
120 s when absent) and tolerates one missed round plus loop slack before
showing "ESP Screens niet actief". The tick redraws once when either flips.
Firmware 0.2.22 for CYD and Guition.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
App 0.2.23 / firmware 0.2.19.
- Wide cards of climate, switch, light, fan, vacuum, cover, media_player,
number, select, timer, scene, script and button show Home Assistant style
controls on the right (keys, -/+ pill with debounced send, slider with
handle, toggle, run key); per-tile choice `options.controls` in the editor
with mockup preview; the add-on sends only the set a card really shows.
- Weather card: now + next hours and coming days with rain, from daily and
hourly forecasts; scenes/scripts/buttons show when they last ran.
- Climate card: power key, tap-to-toggle option, fan and swing rows in a
redesigned mode picker (grey backdrop, white chips, accent selection).
- Busy state as a spinner on a translucent sheet; render guards so only
changed styles reach LVGL; dark theme removed from the runtime code.
- supported_features above 1e6 reaches the screen; middle dot in text fonts;
18 control glyphs in the icon fonts; diagnostics services
preview_climate_picker and preview_busy; demo layout --controls.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
/api/events streams the light inventory whenever the sync loop or a save
changes it (3 s check during firmware updates). The page stops polling
while the stream is open and falls back to the 10 s poll otherwise. The
websocket close is logged with duration, close code and exception.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The sync loop now wakes only for state changes of entities on a layout or
belonging to a screen. Registries refresh on HA registry events with a
10 minute fallback instead of every 30 s. The page polls a light inventory
(screens + update status) every 10 s and the full catalogues every 5 min or
when the tab becomes visible. The full keepalive interval is 120 s.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
/api/inventory re-read every ESPHome profile with pure-Python PyYAML up to
four times per request, which blocked the event loop for seconds on a Pi.
Profiles are now cached per file on (inode, mtime_ns, size), parsed with
libyaml when available, and read once per request. The sync loop computes
the inventory once per iteration. The page pauses polling while hidden.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- screen_manager/app/tile_icons.py is the single icon list (12 groups, 20 media
and music icons); tools/generate_icons.py writes it into the three icon fonts
of both boards and builds the editor's subset font.
- Firmware 0.2.18 shows o.icon when its fonts carry the glyph, else the domain
icon. The app sends the chosen icon, or Home Assistant's own mdi icon on auto.
- Tile sheet gets an icon picker with search; the mockup shows the icon the
screen actually draws.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Screens now report their ESPHome name and IP address, so the add-on can
match each screen to its YAML profile and OTA address itself. The screen
list shows an update badge with a Bijwerken button, an update-all action
and a nightly checkbox; updates run one screen at a time, wait for the
new version to report back and stop the round on the first failure.
App 0.2.16, firmware 0.2.17.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Any tile can now be double width: pack() in runtime_model.h places wide
tiles in the left column and the manager preview follows the same rules.
New cards: built-in clock (digital or analog, screen.clock), five-day
weather forecast on a wide weather card fed by weather.get_forecasts,
history sparkline for sensors, sunrise/sunset (sun.sun), live kitchen
timer (timer.*, tap starts or pauses) and presence (person.*). The
manager pre-computes time-zone and forecast extras in a new 'x' object
and refuses layouts with new domains until the screen runs 0.2.14.
The self-test follows the packing, checks custom card parts and wide
widths, and diagnostics/send_layout.py pushes a demo layout of every
card type for render checks without Home Assistant. App 0.2.12,
firmware 0.2.14.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Max Gramser