An alert from esp_screens_show_alert takes a `camera` (a camera.* or image.* entity): a Guition with firmware
0.2.57 shows that moment's picture across the top of the card, and a tap opens the camera full screen. A camera
or image tile opens the same full-screen view, refreshed every four seconds at a steady pace.
ESP Screen Manager fetches the snapshot with its own access, sizes it for the screen and serves a 24-bit BMP
under a random, short-lived link on port 8098; the screen loads it with ESPHome's online_image and holds no
Home Assistant token. BMP because ESPHome decodes it per chunk, where a full-screen JPEG held the loop 0.6 s.
The CYD keeps its alerts without the picture and gets no camera tiles.
The Guition also builds with ESPHome 2026.8+ again: backlight_fade.h derived from ESPHome's LEDC output, which
2026.8 made final, so the backlight now dims through ESPHome's own light transition.
Tested on the bench boards and a local add-on on the Home Assistant Yellow; docs/TEST_RESULTS_0266.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Dark mode is a new switch under Brightness on the screen's settings page, in
the Screen settings of ESP Screens and as switch.<screen>_dark_mode in Home
Assistant, so an automation can turn it on at bedtime. The screen changes
look at once, open cards and an alert included, and keeps it after a
restart. The design stays the same: a black page, graphite cards with a
hairline, soft white text, Home Assistant's state colours where they tell
something, and pastel card colours as deeper versions of themselves.
Every colour the firmware chooses now lives in components/smart_display/
theme.h: roles with a light and a dark value, the named card colours and
Home Assistant's state colours. The board profiles give widgets colourless
shared styles that theme.h fills, so a change of look refills those styles
and draws again what code painted by state. The light look is unchanged
apart from merges below one panel step. Dark mode costs 440 bytes of static
RAM on the CYD, and the LVGL tree of the host build is 416 bytes smaller; tests
keep colours out of every other file.
Comparing a screen that switched looks with one that booted in it also
found two older bugs, now fixed: a settings switch that was on showed its
knob at the left whenever its page was drawn, and the sun card's sunlit
area turned orange after a palette change. Firmware 0.2.54.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Max Gramser