packages/core.yaml sets wifi: power_save_mode: none. ESPHome merges it
under the screen's own wifi: block, which keeps the network, the password
and the hotspot, and the screen's own YAML still wins on the mode. The
YAML ESP Screens writes has had the line since app 0.2.24; screens with
an older or hand-written YAML ran ESPHome's ESP32 default light, and
their messages from Home Assistant waited 76-117 ms on the bench.
esphome config on the bench screens' Device Builder YAMLs: NONE for both
without a line of their own, LIGHT when the YAML says light. The bench
Guition, flashed from its Device Builder YAML: ping 15 ms average instead
of 117 ms. tools/check.sh: 474 Python tests (a new one keeps the core's
wifi: block to this one key), 19/19 C++, editor; firmware unchanged in
size (CYD 1,678,816 B, 91.5 %; Guition 2,055,280 B), since the checkout
profiles already had the line.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
README_EXTENDED rendered everything from "Direct control" to "Override YAML" as raw text on
GitHub since 0.2.74: the full-page pictures ended without a blank line. It also gains the
media card, Page buttons, the ··· menu's Identify/Copy/Export/Import, Try it, and where
SCREEN_FIRMWARE_VERSION lives now. EASY_SETUP's settings table drops Show clock and gets
Back to page 1; SETTINGS.md points at web/src/store.ts and packages/core.yaml; GUITION.md
had the GT911 mirrored and cache settings that left the profile on 2026-09-12;
TROUBLESHOOTING still named TILE_COUNT and files deleted in 0.2.50; CALIBRATING put
Calibrate touch in ESP Screens instead of Home Assistant. RELEASING gets the compatibility
notes of 0.2.73 to 0.2.85 and the GitHub release step.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The two board profiles (5,000 lines each, 87 % the same text) become packages/core.yaml and one file per
board under packages/boards/: the hardware, a table of 84 sizes and font sizes, 18 hooks with the lines of C++
only that board adds inside a shared lambda, and the board's own sections. packages/cyd.yaml and
packages/guition.yaml keep their names and places (a screen installed from ESP Screens builds as before);
home-like-2432s028.yaml and guition-4848s040.yaml become the same entries for a checkout.
The firmware stays 0.2.70: the C++ ESPHome generates for each board, through the checkout profile and
through the GitHub package route, was compared line by line with the old profiles' (docs/TEST_RESULTS_0284.md).
tools/check_packages.py replaces tools/generate_packages.py; tools/profiles.py gives the tests and tools the
three files as one; docs/PROFILES.md says how the files fit together and how a board is added.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Max Gramser