App 0.2.47 / firmware 0.2.40:
- guition-4848s040.yaml gets the CYD's climate card: the setpoint between large -/+ keys
(debounced, hold to repeat) and one row of mode keys in HA's order and colours; the arc,
scrim, mode pill and climate_number font are gone.
- Fan and swing modes sit right on the card as segmented rows behind their icons, drawn by the
new climate_card.h (async rebuild, taps through the touch guard and a profile hook). The card
is laid out per case from one table: no, one or two settings rows, with or without mode keys.
- Both boards hide a mode key row that would hold a single mode and centre the setpoint instead.
- Glyph arrow-oscillating (Home Assistant's swing icon) joins the icon set.
Verified on the Guition over OTA with the owner's air conditioner and with host renders of both
boards; see docs/TEST_RESULTS_0247.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
App 0.2.46 / firmware 0.2.39:
- The vacuum's state message carries extras from its own device: the cleaning mode and water
selects (found by translation key, then entity id ending, so localized ids work), the suction
speeds to offer, the battery sensor (HA 2026.8 dropped battery_level), charging and the current
room. Speeds and water levels a mode covers move into the mode row; Custom only while in use.
The manager watches these entities and resends only the vacuum's message when one changes.
- Vacuum card redesign on both boards: robot with state, battery, charging bolt and room; Start
(Pause, Resume) and Dock; then segmented rows for mode, suction and water, showing only the rows
the chosen mode uses. Taps show at once and wait for Home Assistant; Locate is a round button in
the Guition hero.
- CYD climate card without the arc: big setpoint between large -/+ keys (debounced, hold to
repeat) and one row of mode keys in HA's order and colours, with a more key for fan and swing.
- Both profiles clear climate_edit_pending when the climate card is closed, instead of running
ui_refresh every second while the flag stayed set.
Tested with the owner's Roborock S8 on HA 2026.9.1 (live data, OTA-flashed bench boards) and with
host renders of both boards; see docs/TEST_RESULTS_0246.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Firmware 0.2.37 for both boards:
- The analog clock card gets a thin red second hand that moves every second while the
screen is awake (runtime_tiles::screen_awake, set by the profiles from display_dimmed);
in standby it hides and the clock keeps its once-a-minute redraw.
- Card sliders follow HA's control slider: 12/42 and 8/42 corners, a 4 px handle an
eighth of the height from the fill end, a stub of a third of the height at 0 or 1 %,
the track in the fill colour at 20 %. An off light or fan shows only the empty grey
track, also in the colour card's brightness row. A light's slider floors at 1 %.
- Every overlay card shares one top bar: a round back arrow at the left (60/40 px), the
name centred, and only the climate power as a right-hand action. The "done"/"ok"
buttons of the colour and vacuum cards are gone; the brightness card gets its arrow.
- The top bar reads "Connecting to Home Assistant..." / "Waiting for ESP Screens..."
until the first layout, instead of "Choose tiles in HA".
Checked with the host renderer for both boards and on the Guition over USB.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Every screen gets the user action esphome.<device>_show_alert with title,
subtitle, icon, color, button_text, timeout and flash. The card sits on
LVGL's top layer above every page, card and the dim overlay, wakes the
screen and keeps the backlight at its normal brightness until the button
(or the timeout; 0 waits for the button, the button always closes at
once). flash: true blinks the backlight four times on arrival. Icons are
the tile picker names (also mdi:name or the hex codepoint of a compiled
glyph, else alert-outline), colours the tile pastels. A new alert replaces
the current one; every ending fires esphome.screen_alert with action,
title and screen. dismiss_alert removes the card remotely.
The field is button_text rather than button: ESPHome reserves the names
of loaded components as ids and the CYD profile loads button:. The C++
namespace is screen_alert because the widget id alert_overlay becomes a
global lv_obj_t*.
tools/generate_icons.py now also writes tile_icon_names.h (name to
codepoint) from the one icon list. Firmware 0.2.31 for both boards.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Max Gramser