The add-on ships ESPHome 2026.9.0: it builds an ESP32 with ESP-IDF itself
and keeps a compiler cache. firmware.py gives the CLI its own storage in
/data (ESPHOME_DATA_DIR /data/esphome, which the ESPHome Device Builder no
longer wipes on start; ESP-IDF and ccache in /data/idf, at most 1 GB;
compilers limited to the core count as PlatformIO ran them), removes the
unused PlatformIO once before the first ESP-IDF build, and leaves the new
folders out of backups.
Firmware 0.2.75: assertion_level SILENT in every board's esp32 block, the
core logs from INFO, and clock_parts() in runtime_model.h replaces sscanf.
timer_left() caps a running timer at its duration (the screen's clock runs
up to a second behind Home Assistant's). The packages keep min_version
2026.6.2, the top-level online_image and OTA passwords for new screens, so
an add-on or Device Builder that isn't updated yet keeps building every
screen; CI now builds both boards with the add-on's ESPHome and with
min_version. ESP-IDF's error names stay on, and build_flags stay under
platformio_options, because ESPHome 2026.9's LVGL reads only those.
tools/check.sh: 478 Python tests, 19/19 C++, editor; --firmware PASS with
ESPHome 2026.6.2 (CYD 87.7 %), 2026.8.1 (88.3 %) and 2026.9.0 (86.4 %,
was 91.5 %). Both bench screens OTA'd and watched for half an hour;
ESP Screens as a local add-on on the Yellow built both profiles
(CYD 1,037 s first build, 41 s unchanged). Details:
docs/TEST_RESULTS_0289.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The airco tile stayed orange while the airco was off. The firmware kept its own
short list of what turns grey and gave an off climate Home Assistant's orange,
but Home Assistant has no colour for a climate that is off: its cards fall back
to the inactive grey. Other tiles had the same fault: an off fan, a closed
blind, a docked robot, a player in standby, an idle script, a paused timer and
a camera that isn't streaming all kept their colour.
Tile::active() is now a port of the frontend's stateActive() for the domains a
tile can show, and every tile that is not active is grey. An airco that is off
reads Off, with the room's temperature when the device reports one, as Home
Assistant's tile does. tile_controls::accent() follows stateColorCss(): alarm
binary sensors red, a battery green, orange or red by its charge, a running
script or timer and a streaming camera amber, the weather per condition, the
sun amber and indigo, someone in a zone blue. Scenes, selects, numbers and
sensors keep their own colour per kind. A full-page tile lights up only for
tiles that can be off (Tile::lights_up), and a closed blind's slider keeps its
colour. The top bar's alarm classes are Home Assistant's eleven.
Checked with tools/check.sh (471 Python tests, 19/19 C++ with 58 state cases
and every colour rule) and compiled for both boards: CYD 1,677,488 B (91.4 %,
+576 B), Guition 2,054,640 B (25.3 %).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A test and code-analysis round of 0.2.72 to 0.2.76 (suites at every tag, sanitizers, ESP32 and GitHub builds, host
harnesses on both boards, the editor in a browser, best practice checked against ESPHome, LVGL, Home Assistant and
Vue) found these, fixed here with Max's choices for the product questions:
- Firmware 0.2.65: the second hand of a single analog clock moves again; on a page that is one full on/off tile the
waking push also switches it; on the Guition a flick is never a tap and a finger that slides off a tile doesn't tap
it; Previous/Next react to a firm press; the same Go to page tile may sit on several pages; a layout the screen has
no memory for is refused instead of crashing; 64-bit redraw mask for 48 tiles; Montserrat 14 no longer built.
- App: Save refuses a layout too long for one message or too big for eight pages; an offline screen keeps its
firmware version from the device registry; HA refusals reach the editor; 128 KB requests; changelog out of the
live stream; cached hashed assets; tini as init and a clean stop; changelog parsing without asterisks or crashes.
- Editor: clicking the open screen keeps unsaved edits, edits during a save stay unsaved, a Page row and phone
dragging to other pages, repeated page tiles, limits from the server, HA's error messages, a type-checked build.
- tools/check.sh + GitHub Actions + a CYD flash budget; docs match 48 tiles and the new editor.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Max asked for many more tiles, a tile that takes the whole page as a light
switch you push without looking, and tiles that go to a page. The limit is
one tile per slot of the eight pages, 48, and the firmware keeps its tile
list on the heap sized to the layout (PSRAM on a Guition). A tile's size can
be `full`: one big button that lights up in the state colour while on, or the
double-width card's head with its small slider, direct controls or graph at
the bottom and the value the double-width card had no room for in between;
the clock, the forecast (with an hours strip) and the sun path fill the page.
Navigation tiles are the built-in entities screen.page_1 to screen.page_8:
an arrow or a chosen icon, the name and "Page n", a tap opens that page.
The app sends the three only to firmware 0.2.62+, the editor (the Vue port of
this round by the editor session, 00c9a4e) offers Normal / Double-width /
Full page and "Goes to page", and Claude in Home Assistant gets size: full and
the page tiles. Built-in tiles now send a chosen icon as its codepoint.
Found and fixed by the new host harness before release: the one-second tick
moved the analog clock's second hand (part 18) on a full forecast's hour label
during a page switch and corrupted it. Firmware 0.2.62; both C++ and Python
suites, host harness 37/37 on both boards, hardware pass on both bench boards
in docs/TEST_RESULTS_0274.md.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
GitHub issue #7 asked for cover.toggle on tap. ESP Screens now asks Home
Assistant which actions each entity has instead of keeping lists: the editor
offers On / off (covers included), sliders, controls and displays only where
Home Assistant has the action, and refuses only new unsupported settings.
Perform action runs any action Home Assistant offers for the tile's entity,
under its own names and fields; the screen sends it with a call id and says
Refused when Home Assistant refuses. Sensors round by display precision, and
tiles, the top bar, timelines, vacuum chips and the inspector use Home
Assistant's words where they showed raw states. Tiles show Home Assistant's
icons, picked as its frontend does (the fonts grow to 309 glyphs).
Existing screens keep every setting and tap as before: stored layouts load
leniently, legacy taps route the same (1020 combinations), and messages are
byte-identical without Home Assistant's words and icons. Firmware 0.2.58.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Since firmware 0.2.42 a slider showed the tile's colour only while
Tile::active() held, which is never true for a playing, paused or idle
media player, a cover or a number, so their volume, position and value
sliders stayed grey like a light that is off.
Tile::slider_active() follows Home Assistant's tile sliders instead: grey
for an unavailable entity, a light or fan that is off and a media player
that is off or in standby; a closed cover keeps its colour as in HA's
cover position feature, and a number with a value is active. The sliders
of direct controls on wide tiles and the small sliders use it;
Tile::active() and its other uses are unchanged.
Checked with 282 Python and 15 C++ tests, generate_packages --check, ESP32
builds of both check profiles and host renders of both boards.
Firmware 0.2.52.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The CYD restarted under load: a slider fill rounded less than its track made
LVGL draw the fill into a buffer of its own size on every redraw (15-20 KB), and
when that allocation failed the refresh retried until the task watchdog fired.
Track and fill now share one radius, and tests/test_layer_free.py keeps every
layer-making style out of the profiles, the packages and the firmware headers.
A tile keeps only the fields every card uses; climate modes, select options,
weather, sun and timer times, the media title and the vacuum rows moved to an
Extra block that exists only while a state needs one, and the state copy became
a fingerprint. runtime_tiles::model went from 24,296 to 8,216 bytes.
The manual profile that bound tiles to fixed entities in the YAML is gone:
331 TILE* substitutions, DYNAMIC_TILES/TILE_COUNT/DIRECT_ACTIONS, the 80 Home
Assistant subscriptions, its tap handlers and scripts, its own vacuum card, its
guides and helper scripts, and the five stale header copies in the repository
root that two C++ tests were compiling instead of the components. esphome config
of both Easy profiles is unchanged by that cleanup.
tile_scroll and the wake overlay no longer light up on a tap, and the debug
sensor min_free reports the lowest free heap since boot. On the bench CYD static
RAM went from 32.0% to 22.8% and free heap from 64-77 KB to about 101 KB, with
78 KB as the lowest point over thirteen hours without a restart.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Everything a user sees or reads is now English: both boards' labels,
status replies and logs, the ESP Screens editor and Alerts cheatsheet,
and the README and guides (docs/TILES.md, CALIBRATING.md, ACCEPTANCE.md
and TROUBLESHOOTING.md replace the Dutch file names). Labels follow
Home Assistant's own English names (Heat/Cool modes, Heating/Cooling
actions, Away, Returning to dock, weather conditions), dates use English
abbreviations and the top bar writes numbers the English way. Docs use
HA 2026.9's menu names (Settings -> Apps, App store, Settings -> Tools).
Unused legacy files (home-like.yaml, buttons.yaml, a.out) are removed.
Firmware 0.2.34 names its entities in English. Home Assistant registers
a renamed ESPHome entity under a new entity ID, so the inbox
text.<screen>_tegelinstellingen becomes text.<screen>_tile_settings and
the layout stored under the old ID would be lost. The manager now
recognises the screen by its device, during a run or after a restart,
and moves its layout and update history along; the Update button and
the nightly round follow the screen through the rename. Screens that
still run 0.2.33 or older keep working: both languages are matched.
Main is the only release branch from now on.
Tested on a Home Assistant Yellow (HA 2026.9.1) with both bench boards:
see docs/TEST_RESULTS_0240.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Tiles get an absolute grid slot instead of a packed order: a tile lands exactly
where it is dropped, dropping on another tile swaps the two, everything else
stays put, and empty cells and empty pages persist. The mockup previews the
result while dragging, a new page waits below the last one, "Pagina toevoegen"
keeps an empty page, empty cells accept the next tile from the picker, and the
mouse no longer selects text while dragging.
Storage and protocol stay version 1: `tiles[].slot` (0-47) and `pages` (1-8)
are additive, the layout message carries `slots` and `pages`. Firmware 0.2.26
places tiles on those slots (`place()` next to `pack()`); older firmware packs
in order as before and the editor says so.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Any tile can now be double width: pack() in runtime_model.h places wide
tiles in the left column and the manager preview follows the same rules.
New cards: built-in clock (digital or analog, screen.clock), five-day
weather forecast on a wide weather card fed by weather.get_forecasts,
history sparkline for sensors, sunrise/sunset (sun.sun), live kitchen
timer (timer.*, tap starts or pauses) and presence (person.*). The
manager pre-computes time-zone and forecast extras in a new 'x' object
and refuses layouts with new domains until the screen runs 0.2.14.
The self-test follows the packing, checks custom card parts and wide
widths, and diagnostics/send_layout.py pushes a demo layout of every
card type for render checks without Home Assistant. App 0.2.12,
firmware 0.2.14.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Max Gramser