Tiles get an absolute grid slot instead of a packed order: a tile lands exactly
where it is dropped, dropping on another tile swaps the two, everything else
stays put, and empty cells and empty pages persist. The mockup previews the
result while dragging, a new page waits below the last one, "Pagina toevoegen"
keeps an empty page, empty cells accept the next tile from the picker, and the
mouse no longer selects text while dragging.
Storage and protocol stay version 1: `tiles[].slot` (0-47) and `pages` (1-8)
are additive, the layout message carries `slots` and `pages`. Firmware 0.2.26
places tiles on those slots (`place()` next to `pack()`); older firmware packs
in order as before and the editor says so.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The status line under each screen name used the muted text colour for the
online dot, so online and offline screens looked alike. The dot is now its
own span and turns green when the screen is online; offline keeps the grey
open circle. Firmware 0.2.25 for both boards carries only the new version.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Page swipes were an LVGL gesture anywhere on the screen: 50 px, fast only,
and almost always starting on a tile that lit up as pressed. On the Guition
a touch that starts within 32 px of the left or right edge and travels
40 px inward, clearly sideways, now flips one page (from the right edge
leftwards is next, from the left edge rightwards previous), at any speed
and in every rotation; a swipe that starts in the middle does nothing, so
taps and drags on tiles can no longer change the page by accident. The
whole-screen gesture is removed from the Guition profile; the CYD keeps
it. Firmware 0.2.24 for both boards, the app only reworded the setting.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
The touch guard dropped a tap as soon as the finger drifted more than
18 px (under 3 mm) from its very first contact point, on both boards and
regardless of the page-swipe setting; LVGL itself never cancelled these
clicks (no scrollable ancestors, gestures do not suppress clicks). A finger
that flattens or rolls while pressing was enough, and the tap vanished
without a trace in the log.
The limit is now about one centimetre per board (TOUCH_MOVE_LIMIT_PX:
Guition 67 px, CYD 56 px), measured from a reference that settles over the
first four samples; only the contact that started the touch is followed,
so a second finger no longer counts as movement; the minimum contact time
is per board too (TOUCH_MIN_PRESS_MS: 60 ms resistive, 20 ms capacitive).
Every refused tap is logged on INFO with its reason (moved, too short,
already used, bounce). Firmware 0.2.23 for CYD and Guition.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
"Nieuw scherm" used to span two dialogs plus a copy/download of the
installation YAML. It is now one dialog: board, name (node name derived,
editable), wifi only when secrets.yaml lacks it, the detected USB port,
and Installeren. The add-on writes the profile with unique API/OTA keys,
merges just the missing wifi lines into secrets.yaml (comments and other
secrets untouched, result re-parsed before writing), then builds and
flashes with the live ESPHome log and stage in the same dialog; a failed
build offers a retry without a second profile. The YAML download
endpoint is gone: the profile already lives in the ESPHome folder.
Pairing happens in Home Assistant itself, so the done view and a sidebar
card per not-yet-paired profile say so, with a button to Apparaten &
diensten, the API key to copy and the reminder to allow HA actions.
One profile per screen; the dialog says that too.
Tests: wifi merge cases, install pre-checks, pending list, profile
metadata; the date-anchored hourly forecast test now follows the clock.
Firmware 0.2.22 stays current.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Since 0.2.20 the manager repeats a layout every 120 s, while the firmware
treated anything older than 95 s (sized for the original 25 s keepalive) as
stale: on a quiet screen every card read "Niet beschikbaar" and the header
"HA niet verbonden" for 25-45 s of each two-minute round, on both boards.
"HA niet verbonden" now follows ESPHome's own api_is_connected(); the feed
watchdog uses the cadence the layout message declares ("keepalive", seconds,
120 s when absent) and tolerates one missed round plus loop slack before
showing "ESP Screens niet actief". The tick redraws once when either flips.
Firmware 0.2.22 for CYD and Guition.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
App 0.2.24 / firmware 0.2.20.
- Forecast and hourly data live in vectors that only weather tiles fill:
Tile 2016 -> 1216 bytes, CYD free heap 20-26 KB -> 34-37 KB in the self-test.
- The bottom mini slider shows the same white handle as the control sliders.
- CYD light/fan/cover card uses the Guition light palette (last dark-theme remnant).
- power_save_mode: none in the wizard YAML and board profiles; docs explain
adding it to existing YAMLs. Rendering review in docs/TEST_RESULTS_0224.md.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
App 0.2.23 / firmware 0.2.19.
- Wide cards of climate, switch, light, fan, vacuum, cover, media_player,
number, select, timer, scene, script and button show Home Assistant style
controls on the right (keys, -/+ pill with debounced send, slider with
handle, toggle, run key); per-tile choice `options.controls` in the editor
with mockup preview; the add-on sends only the set a card really shows.
- Weather card: now + next hours and coming days with rain, from daily and
hourly forecasts; scenes/scripts/buttons show when they last ran.
- Climate card: power key, tap-to-toggle option, fan and swing rows in a
redesigned mode picker (grey backdrop, white chips, accent selection).
- Busy state as a spinner on a translucent sheet; render guards so only
changed styles reach LVGL; dark theme removed from the runtime code.
- supported_features above 1e6 reaches the screen; middle dot in text fonts;
18 control glyphs in the icon fonts; diagnostics services
preview_climate_picker and preview_busy; demo layout --controls.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- screen_manager/app/tile_icons.py is the single icon list (12 groups, 20 media
and music icons); tools/generate_icons.py writes it into the three icon fonts
of both boards and builds the editor's subset font.
- Firmware 0.2.18 shows o.icon when its fonts carry the glyph, else the domain
icon. The app sends the chosen icon, or Home Assistant's own mdi icon on auto.
- Tile sheet gets an icon picker with search; the mockup shows the icon the
screen actually draws.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Screens now report their ESPHome name and IP address, so the add-on can
match each screen to its YAML profile and OTA address itself. The screen
list shows an update badge with a Bijwerken button, an update-all action
and a nightly checkbox; updates run one screen at a time, wait for the
new version to report back and stop the round on the first failure.
App 0.2.16, firmware 0.2.17.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Firmware 0.2.16: the analog clock uses index strokes with 12/3/6/9
numerals on large cards and shows a calendar block (weekday, big day,
short month) beside the dial on single tiles; wide cards keep the digital
time and date. New palette key 'none' hides only the card fill and
border: geometry, padding and the pressed flash stay identical. Skeleton
frames and the render self-test honour the transparency.
App 0.2.15: 'Geen' in the background palette with a dashed mockup tile,
min_firmware 0.2.16 for such layouts, demo layout with the bare calendar
clock (--wide for the double-width clock). README and AGENTS note that
every push is a release and bumps the add-on version.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Any tile can now be double width: pack() in runtime_model.h places wide
tiles in the left column and the manager preview follows the same rules.
New cards: built-in clock (digital or analog, screen.clock), five-day
weather forecast on a wide weather card fed by weather.get_forecasts,
history sparkline for sensors, sunrise/sunset (sun.sun), live kitchen
timer (timer.*, tap starts or pauses) and presence (person.*). The
manager pre-computes time-zone and forecast extras in a new 'x' object
and refuses layouts with new domains until the screen runs 0.2.14.
The self-test follows the packing, checks custom card parts and wide
widths, and diagnostics/send_layout.py pushes a demo layout of every
card type for render checks without Home Assistant. App 0.2.12,
firmware 0.2.14.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Large-value (watch) tiles show a small domain icon next to the title, centre
title and value vertically, use a dedicated larger digit font, truncate long
values with dots and keep the unit in its own label. The geometry self-test
checks the unit label too.
The Guition backlight now dims through the LEDC hardware fader (1.5 s to
standby, 80 ms wake) so full LVGL redraws no longer make the transition
stutter; ESPHome's light state is synced after each fade. Firmware 0.2.13;
app 0.2.11 stays compatible. Document the shared build directory pitfall.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Max Gramser