A tap on a cover now opens a card like Home Assistant's own, in the style
of the climate and vacuum cards: a tall position slider on which the blind
hangs from the top, a tilt slider over slats for venetian blinds, and open,
stop and close keys. The key of the direction the cover moves is filled; a
key that cannot move it further is disabled and stays out of the keys the
card's tick enables. Sliders show their value while dragged and send it on
release. The card offers only what supported_features allows. A
battery-powered blind shows its battery at the top right: the app sends
the device's battery sensor as the extra the vacuum card uses, and adds
current_tilt_position to the attributes.
Checking Studio 1 after its update to firmware 0.2.49 found that a setting
number equal to its initial state 0 (night brightness 0 %) was never
published, so Home Assistant kept it unknown and ESP Screens could not
change it; apply_screen_settings now publishes a number without a state.
The app also took "unavailable" for the device name during the restart
and wrote sensor.esp_screens_unavailable; diagnostics ignore unknown and
unavailable. The editor redraws its tiles, top bar and entity list when
the live stream opened a screen before the first full inventory (a busy
add-on), and loads app.js and style.css by content stamp after Safari kept
an old script.
Checked with 254 Python and 14 C++ tests, generate_packages --check, ESP32
builds of both profiles, and 20 API checks of the card on host builds of
both boards. Firmware 0.2.50.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
App 0.2.47 / firmware 0.2.40:
- guition-4848s040.yaml gets the CYD's climate card: the setpoint between large -/+ keys
(debounced, hold to repeat) and one row of mode keys in HA's order and colours; the arc,
scrim, mode pill and climate_number font are gone.
- Fan and swing modes sit right on the card as segmented rows behind their icons, drawn by the
new climate_card.h (async rebuild, taps through the touch guard and a profile hook). The card
is laid out per case from one table: no, one or two settings rows, with or without mode keys.
- Both boards hide a mode key row that would hold a single mode and centre the setpoint instead.
- Glyph arrow-oscillating (Home Assistant's swing icon) joins the icon set.
Verified on the Guition over OTA with the owner's air conditioner and with host renders of both
boards; see docs/TEST_RESULTS_0247.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
App 0.2.46 / firmware 0.2.39:
- The vacuum's state message carries extras from its own device: the cleaning mode and water
selects (found by translation key, then entity id ending, so localized ids work), the suction
speeds to offer, the battery sensor (HA 2026.8 dropped battery_level), charging and the current
room. Speeds and water levels a mode covers move into the mode row; Custom only while in use.
The manager watches these entities and resends only the vacuum's message when one changes.
- Vacuum card redesign on both boards: robot with state, battery, charging bolt and room; Start
(Pause, Resume) and Dock; then segmented rows for mode, suction and water, showing only the rows
the chosen mode uses. Taps show at once and wait for Home Assistant; Locate is a round button in
the Guition hero.
- CYD climate card without the arc: big setpoint between large -/+ keys (debounced, hold to
repeat) and one row of mode keys in HA's order and colours, with a more key for fan and swing.
- Both profiles clear climate_edit_pending when the climate card is closed, instead of running
ui_refresh every second while the flag stayed set.
Tested with the owner's Roborock S8 on HA 2026.9.1 (live data, OTA-flashed bench boards) and with
host renders of both boards; see docs/TEST_RESULTS_0246.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- The app listens for the Home Assistant events esp_screens_show_alert and
esp_screens_dismiss_alert and calls each screen's show_alert/dismiss_alert action,
screens added later included. Fields are typed like Home Assistant's ESPHome action
schema; an unusable value is left empty instead of losing the alert.
- Settings → Claude installs an ESP Screens skill for Claude Code in Home Assistant
(/homeassistant/.claude/skills/esp-screens) or downloads it as a zip for claude.ai.
It is generated from the alert reference, so fields, colors and icons match the firmware.
- New screen, Firmware & USB, firmware updates, Alerts and Claude move to a Settings view;
the header keeps one button. Unselected screens in My screens get a light grey card.
App only; firmware stays 0.2.38.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
- README: photos of a Guition at home, both boards with demo layouts, a card gallery,
the alert with the Alerts cheatsheet, New screen and choosing tiles, tile settings next
to the resulting tile, and the top bar sheet. Screen images are rendered from the
firmware's own LVGL code (ESPHome host + SDL) fed by the app's own messages on a demo home.
- App store page (screen_manager/README.md): a photo and the editor via absolute URLs.
- Firmware 0.2.35 only raises SCREEN_FIRMWARE_VERSION so the update path can be tested.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Max Gramser