The touch guard dropped a tap as soon as the finger drifted more than
18 px (under 3 mm) from its very first contact point, on both boards and
regardless of the page-swipe setting; LVGL itself never cancelled these
clicks (no scrollable ancestors, gestures do not suppress clicks). A finger
that flattens or rolls while pressing was enough, and the tap vanished
without a trace in the log.
The limit is now about one centimetre per board (TOUCH_MOVE_LIMIT_PX:
Guition 67 px, CYD 56 px), measured from a reference that settles over the
first four samples; only the contact that started the touch is followed,
so a second finger no longer counts as movement; the minimum contact time
is per board too (TOUCH_MIN_PRESS_MS: 60 ms resistive, 20 ms capacitive).
Every refused tap is logged on INFO with its reason (moved, too short,
already used, bounce). Firmware 0.2.23 for CYD and Guition.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Since 0.2.20 the manager repeats a layout every 120 s, while the firmware
treated anything older than 95 s (sized for the original 25 s keepalive) as
stale: on a quiet screen every card read "Niet beschikbaar" and the header
"HA niet verbonden" for 25-45 s of each two-minute round, on both boards.
"HA niet verbonden" now follows ESPHome's own api_is_connected(); the feed
watchdog uses the cadence the layout message declares ("keepalive", seconds,
120 s when absent) and tolerates one missed round plus loop slack before
showing "ESP Screens niet actief". The tick redraws once when either flips.
Firmware 0.2.22 for CYD and Guition.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
App 0.2.25 / firmware 0.2.21. The 600 ms touch-guard lockout dropped a second
tap on the same -/+ key; stepper keys now use a 150 ms bounce guard, repeat
while held (3 per second), and still send one call after 700 ms of rest.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
App 0.2.24 / firmware 0.2.20.
- Forecast and hourly data live in vectors that only weather tiles fill:
Tile 2016 -> 1216 bytes, CYD free heap 20-26 KB -> 34-37 KB in the self-test.
- The bottom mini slider shows the same white handle as the control sliders.
- CYD light/fan/cover card uses the Guition light palette (last dark-theme remnant).
- power_save_mode: none in the wizard YAML and board profiles; docs explain
adding it to existing YAMLs. Rendering review in docs/TEST_RESULTS_0224.md.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
App 0.2.23 / firmware 0.2.19.
- Wide cards of climate, switch, light, fan, vacuum, cover, media_player,
number, select, timer, scene, script and button show Home Assistant style
controls on the right (keys, -/+ pill with debounced send, slider with
handle, toggle, run key); per-tile choice `options.controls` in the editor
with mockup preview; the add-on sends only the set a card really shows.
- Weather card: now + next hours and coming days with rain, from daily and
hourly forecasts; scenes/scripts/buttons show when they last ran.
- Climate card: power key, tap-to-toggle option, fan and swing rows in a
redesigned mode picker (grey backdrop, white chips, accent selection).
- Busy state as a spinner on a translucent sheet; render guards so only
changed styles reach LVGL; dark theme removed from the runtime code.
- supported_features above 1e6 reaches the screen; middle dot in text fonts;
18 control glyphs in the icon fonts; diagnostics services
preview_climate_picker and preview_busy; demo layout --controls.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
- screen_manager/app/tile_icons.py is the single icon list (12 groups, 20 media
and music icons); tools/generate_icons.py writes it into the three icon fonts
of both boards and builds the editor's subset font.
- Firmware 0.2.18 shows o.icon when its fonts carry the glyph, else the domain
icon. The app sends the chosen icon, or Home Assistant's own mdi icon on auto.
- Tile sheet gets an icon picker with search; the mockup shows the icon the
screen actually draws.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Screens now report their ESPHome name and IP address, so the add-on can
match each screen to its YAML profile and OTA address itself. The screen
list shows an update badge with a Bijwerken button, an update-all action
and a nightly checkbox; updates run one screen at a time, wait for the
new version to report back and stop the round on the first failure.
App 0.2.16, firmware 0.2.17.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Firmware 0.2.16: the analog clock uses index strokes with 12/3/6/9
numerals on large cards and shows a calendar block (weekday, big day,
short month) beside the dial on single tiles; wide cards keep the digital
time and date. New palette key 'none' hides only the card fill and
border: geometry, padding and the pressed flash stay identical. Skeleton
frames and the render self-test honour the transparency.
App 0.2.15: 'Geen' in the background palette with a dashed mockup tile,
min_firmware 0.2.16 for such layouts, demo layout with the bare calendar
clock (--wide for the double-width clock). README and AGENTS note that
every push is a release and bumps the add-on version.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Firmware 0.2.15: trend graphs use a Catmull-Rom curve with a soft fill
drawn by the card's draw event; sun.sun gets a wide sun-path card with
horizon, arc and the sun at its current position; page switches show
the new page's card frames immediately and fill them from a one-shot
timer; the navigation is one full-width bar without a divider; the CYD
adopts the Guition light palette in styles and overlays.
App 0.2.13: pointer-based drag & drop (mouse and touch) to reorder tiles
in the mockup and to drop entities from the list, sticky save bar, a new
header with explained actions and a three-step guide, clearer firmware
dialog. New sun, weather and clock tiles start wide in their best view.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Any tile can now be double width: pack() in runtime_model.h places wide
tiles in the left column and the manager preview follows the same rules.
New cards: built-in clock (digital or analog, screen.clock), five-day
weather forecast on a wide weather card fed by weather.get_forecasts,
history sparkline for sensors, sunrise/sunset (sun.sun), live kitchen
timer (timer.*, tap starts or pauses) and presence (person.*). The
manager pre-computes time-zone and forecast extras in a new 'x' object
and refuses layouts with new domains until the screen runs 0.2.14.
The self-test follows the packing, checks custom card parts and wide
widths, and diagnostics/send_layout.py pushes a demo layout of every
card type for render checks without Home Assistant. App 0.2.12,
firmware 0.2.14.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Max Gramser