A code check found that a setting changed on a screen could jump back.
ESP Screen Manager kept its own copy and sent it with every full update:
after a restart of the app or Home Assistant, every hour and after every
save. A change it missed while it or Home Assistant restarted came back
to the old value, a reported setting was lost when save() refused a
layout with a removed entity, and every step of a held - or + on the
screen resent the whole screen.
Firmware 0.2.49 offers every setting as an entity over the existing
preference records (no migration): Night mode, Night starts/ends,
24-hour clock, Back to page 1 and after how long, Back to page 1 on
standby, Swipe between pages and, on the Guition, Rotation, next to the
four numbers and Auto standby. The settings page and every entity write
through settings_screen::set(), which clamps like the page and stores,
applies and reports only a real change. screen_message answers a caller
that asks with its status and layout revision (api.respond). The
settings tile opens without Home Assistant.
The app reads and changes the settings of such a screen through its
entities and leaves them out of the layout message. Older firmware keeps
them with the layout; a setting it reports is stored without the tile
check and not sent back. Pings to screens that can answer learn at once
whether a tile is missing and resend after 30 s instead of 120 s. Layout
sensors come back after a Home Assistant restart, and weather tiles only
ask for the forecasts the entity supports. The editor's settings form is
now three cards with the rows of the screen's own page; a change applies
at once, and an offline screen shows its values as unknown.
Checked with 245 Python and 14 C++ tests, generate_packages --check,
ESP32 builds of both profiles, host-build API tests on both boards, and
a live run against Home Assistant 2026.9.1 with a temporary host device.
Firmware 0.2.49.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Since firmware 0.2.44 the back arrow of the brightness, colour and climate
cards barely responded, and so did the button at the top right of the
climate card. on_boot created the settings hold strip after the YAML cards
on home_page, so the transparent strip lay on top of them and LVGL's hit
test gave it the taps in the top bar region.
attach_hold now takes the first card as `below` and moves the strip and its
fill line to that index, under every card. Holding the top bar opens the
settings page from the tile pages only. The dim wake overlay was never
affected: apply_screen_settings moves it to the foreground when dimmed.
Checked with 215 Python and 14 C++ tests, generate_packages --check, and
ESP32 builds of both Easy profiles. Firmware 0.2.48.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Every screen gets two template buttons, Wake and Sleep, for automations
(button.press on button.<screen>_wake / _sleep). Wake does what a tap does:
a dimmed screen runs wake_display, a screen that is on only restarts the
standby count. Sleep dims right away through dim_display, also with Auto
standby off, and closes an alert that is up (reported as remote); it is
ignored during a touch calibration.
A new non-restored flag, sleep_requested, keeps that standby in place:
dim_display dims with standby off, and apply_screen_settings, which runs
every minute, no longer wakes such a screen. wake_display clears it (a tap,
Wake, an alert), and so does the Auto standby switch when it really turns
standby off. Nothing is saved, so the buttons cost no flash writes and may
run on every motion.
The Claude skill, README, add-on docs and RELEASING describe both buttons.
Checked on host builds of both boards over the native API, 24 checks each
(timer, Sleep with Auto standby off across a minute tick, alert,
calibration), and with ESP32 builds of both Easy profiles (+336 B RAM).
Firmware 0.2.45.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Holding the top bar for about a second and a half opens a settings page on the
screen, with a blue line filling along the top edge while you hold. A built-in
screen.settings tile and the esphome.<screen>_open_settings action open it too.
The page is one constexpr table of rows in settings_screen.h: Brightness,
Night, Screen (clock, back to page 1, swiping, rotation) and This screen (name,
address, firmware, Home Assistant, Restart). Toggles flip on a tap, numbers and
times step with -/+ (a held time walks whole hours), a choice cycles in a chip,
and a row that depends on a switch above it is greyed out. The LVGL objects exist
only while the page is open: +608 bytes of RAM and +10.7 KB of flash on the CYD.
A change is saved, applied and reported through the existing screen_setting
event, so ESP Screens shows the same value within a second.
New setting auto_home (default on, 2 minutes): an open card, the settings page
or a later page goes back to page 1 after that long without a touch, not only on
standby. It travels beside the frozen eleven-key settings block with its own
preference, so older firmware and older apps keep working.
docs/SETTINGS.md is the recipe for adding a setting; the Claude skill explains
the page. Firmware 0.2.44.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Max Gramser