Starting screen: until the first layout, render() keeps the status text
("Connecting to Home Assistant", "Waiting for ESP Screens") and a spinner
as one block in the middle of the page; the first layout deletes both.
The room label stays empty meanwhile, and ROOM_NAME defaults to "".
Camera: the full screen shows a spinner instead of "Loading image". The
screen asks when the camera opens and loads a link as soon as it comes
(camera_load, never under a finger) instead of waiting for the 250 ms
tick twice, and online_image reads 16 KB per loop instead of 4 KB. On the
bench Guition with the EZVIZ camera: cold 5.8 -> 4.55 s, warm 3.4 -> 2.06 s.
Alert picture: the image takes the frame's radius (18, the alert card's);
LVGL's software renderer clips it row by row, without a layer.
One spinner_create() makes the busy sheet's, the starting screen's and the
camera's spinner; theme role CAMERA_TRACK colours the camera's ring. The
README gets a row of camera pictures; docs/CAMERA.md, RELEASING.md and
TEST_RESULTS_0287.md describe the measurements.
Checked with tools/check.sh (473 Python tests, 19/19 C++, editor) and
--firmware: CYD 1,678,816 B (91.5 %, +1,312 B), Guition 2,055,280 B
(25.3 %). Host renders of both boards in both looks; four OTA builds on
the bench Guition Wallbox, which runs this firmware.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The two board profiles (5,000 lines each, 87 % the same text) become packages/core.yaml and one file per
board under packages/boards/: the hardware, a table of 84 sizes and font sizes, 18 hooks with the lines of C++
only that board adds inside a shared lambda, and the board's own sections. packages/cyd.yaml and
packages/guition.yaml keep their names and places (a screen installed from ESP Screens builds as before);
home-like-2432s028.yaml and guition-4848s040.yaml become the same entries for a checkout.
The firmware stays 0.2.70: the C++ ESPHome generates for each board, through the checkout profile and
through the GitHub package route, was compared line by line with the old profiles' (docs/TEST_RESULTS_0284.md).
tools/check_packages.py replaces tools/generate_packages.py; tools/profiles.py gives the tests and tools the
three files as one; docs/PROFILES.md says how the files fit together and how a board is added.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Max Gramser