Xandrossian
9857cc3bda
A board file for the Elecrow CrowPanel 7.0" (DIS08070H, ESP32-S3-WROOM-1-N4R8): 800x480 through mipi_rgb, GT911 on the ESP32-S3's USB pins (elecrow_usb_phy.h frees them, behind a flag only this board sets), the Guition's vertical sizes across a wider page, no rotation. Its 4 MB of flash take the CYD's budget: a partition table of the component's (smart_display: partitions: 4mb_wide_slots, 1,984 KB slots), the icon fonts at 2 bits a pixel and the TLS client only bring the firmware to 1,865,440 bytes, 91.8 % of a slot, with camera images kept. docs/ELECROW.md has the numbers and the trade. The add-on reads a large board's name from the type sensor's value, the editor offers the board under New screen and draws the wide preview, tools/check.sh builds it with the budget, render_topbar and capture_ui take the panel's size. Firmware 0.2.79; the CYD image is unchanged (1,633,760 bytes). This fork builds from gittea.trippedonmy.name/Xandrossian/homeassistant_espscreen: the packages, the fonts, the component and the add-on repository point there instead of GitHub.
55 lines
2.7 KiB
Python
55 lines
2.7 KiB
Python
"""Save a Guition or Elecrow LVGL diagnostic snapshot as PNG through its encrypted API (half the panel's size)."""
|
|
import argparse
|
|
import asyncio
|
|
from pathlib import Path
|
|
import re
|
|
import struct
|
|
import zlib
|
|
import yaml
|
|
from aioesphomeapi import APIClient, LogLevel
|
|
|
|
|
|
def png(rows,width,height):
|
|
pixels=bytearray()
|
|
for y in range(height):
|
|
pixels.append(0)
|
|
for x in range(width):
|
|
p=int(rows[y][x*4:x*4+4],16)
|
|
pixels.extend((((p>>11)&31)*255//31,((p>>5)&63)*255//63,(p&31)*255//31))
|
|
def chunk(name,data):
|
|
return struct.pack('>I',len(data))+name+data+struct.pack('>I',zlib.crc32(name+data)&0xffffffff)
|
|
return b'\x89PNG\r\n\x1a\n'+chunk(b'IHDR',struct.pack('>2I5B',width,height,8,2,0,0,0))+chunk(b'IDAT',zlib.compress(pixels))+chunk(b'IEND',b'')
|
|
|
|
|
|
async def main():
|
|
p=argparse.ArgumentParser(description=__doc__)
|
|
p.add_argument('--host',default='guition-wallbox.local')
|
|
p.add_argument('--name',default='guition-wallbox')
|
|
p.add_argument('--secrets',type=Path,default=Path(__file__).resolve().parents[1]/'secrets.yaml')
|
|
p.add_argument('--output',type=Path,required=True)
|
|
args=p.parse_args()
|
|
if args.output.exists():raise ValueError('Output already exists; choose a different name.')
|
|
client=APIClient(args.host,6053,noise_psk=yaml.safe_load(args.secrets.read_text())['api_encryption_key'],expected_name=args.name)
|
|
await client.connect(login=True)
|
|
try:
|
|
_,services=await client.list_entities_services()
|
|
done=asyncio.Event();rows={};errors=[];size=[240,240]
|
|
def log(msg):
|
|
text=msg.message.decode(errors='replace') if isinstance(msg.message,bytes) else msg.message
|
|
# The firmware says the image's size first: 240x240 on a Guition, 400x240 on an Elecrow.
|
|
b=re.search(r'IMAGE BEGIN (\d+) (\d+)',text)
|
|
if b:size[:]=[int(b[1]),int(b[2])]
|
|
m=re.search(r'ROW (\d{3}) ([0-9a-f]{960,1600})',text)
|
|
if m and len(m[2])==size[0]*4:rows[int(m[1])]=m[2]
|
|
if 'IMAGE FAIL' in text:errors.append(text);done.set()
|
|
if 'IMAGE COMPLETE' in text:done.set()
|
|
client.subscribe_logs(log,log_level=LogLevel.LOG_LEVEL_INFO,dump_config=False)
|
|
await client.execute_service(next(s for s in services if s.name=='ui_snapshot'),{})
|
|
await asyncio.wait_for(done.wait(),timeout=60)
|
|
if errors or set(rows)!=set(range(size[1])):raise ValueError(f'Incomplete image: {len(rows)}/{size[1]} rows; {errors}')
|
|
with args.output.open('xb') as f:f.write(png(rows,*size))
|
|
print(f'PASS: LVGL render saved to {args.output}')
|
|
finally:await client.disconnect()
|
|
|
|
if __name__=='__main__':asyncio.run(main())
|