Files

T

Max Gramser 57c82fdd12 Bring the big climate card to the Guition, with fan and swing on their own card (0.2.47)

App 0.2.47 / firmware 0.2.40:
- guition-4848s040.yaml gets the CYD's climate card: the setpoint between large -/+ keys
  (debounced, hold to repeat) and one row of mode keys in HA's order and colours; the arc,
  scrim, mode pill and climate_number font are gone.
- Fan and swing modes sit right on the card as segmented rows behind their icons, drawn by the
  new climate_card.h (async rebuild, taps through the touch guard and a profile hook). The card
  is laid out per case from one table: no, one or two settings rows, with or without mode keys.
- Both boards hide a mode key row that would hold a single mode and centre the setpoint instead.
- Glyph arrow-oscillating (Home Assistant's swing icon) joins the icon set.

Verified on the Guition over OTA with the owner's air conditioner and with host renders of both
boards; see docs/TEST_RESULTS_0247.md.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

2026-09-15 15:55:48 +02:00

2.3 KiB

Raw Permalink Blame History

Test results app 0.2.47 / firmware 0.2.40 (2026-09-15)

The new climate card on the Guition with fan and swing on a card of their own, and no single mode key on either board. See CHANGELOG 0.2.47 and RELEASING "Compatibility 0.2.47".

Automated

Python (.venv-portal): 170 tests OK (the icon tests cover the new arrow-oscillating glyph).
C++ (clang++ -std=c++17 -Wall -Wextra -Werror -I . -I components/smart_display): 13/13 PASS. climate_card.h draws LVGL objects and is covered by the host renders below, not by a unit test.
generate_packages.py --check green, generate_icons.py --check verified (150 pickable icons, 180 glyphs).
ESPHome 2026.6.2 compile SUCCESS, one after another: easy-guition-device.yaml (RAM 32.9%, flash 18.9%), easy-cyd-device.yaml (RAM 32.0%, flash 78.5%), guition-device.yaml (RAM 33.0%, flash 20.0%) and device.yaml (RAM 32.0%, flash 83.3%). Packages carry SCREEN_FIRMWARE_VERSION 0.2.40.

Bench boards (OTA)

Both Easy Setup builds uploaded over the network; device_info reports project 0.2.40, compiled 2026-09-15 15:42:18 (Guition) and 15:44:03 (CYD), matching the build logs. ESP Screens reports both screens Synced on 0.2.40.
preview_runtime_card opened the climate card of the owner's climate.airco_remeha_diva_ac on the Guition with live data from app 0.2.46. The capture (capture_ui.py) shows Off with a grey 19°, the five mode keys (heat/cool, heat, cool, dry, fan only), Fan with Low chosen and Swing with Off chosen. The vacuum card of 0.2.46 is unchanged.

Renders (ESPHome host + SDL, both boards, this release's code)

Guition climate card in four cases: heating with three modes and a fan row, an air conditioner with five modes, fan and swing (the owner's attributes), the same with two swing modes, and a heat-only thermostat without fan or swing (no mode keys, setpoint centred). Nothing runs off the screen; the card with two rows ends 10 px above the bottom edge.
CYD climate card: unchanged apart from the heat-only thermostat, which now shows the centred setpoint without a mode key.
docs/images/guition-climate.png comes from the air conditioner render.

Not tested / for the owner

The Guition climate card by hand: − / + taps and holding, mode keys, fan and swing choices with the real air conditioner (tapping sends real commands).

2.3 KiB Raw Permalink Blame History Unescape Escape