Max Gramser
93fa7e2712
Since firmware 0.2.44 the back arrow of the brightness, colour and climate cards barely responded, and so did the button at the top right of the climate card. on_boot created the settings hold strip after the YAML cards on home_page, so the transparent strip lay on top of them and LVGL's hit test gave it the taps in the top bar region. attach_hold now takes the first card as `below` and moves the strip and its fill line to that index, under every card. Holding the top bar opens the settings page from the tile pages only. The dim wake overlay was never affected: apply_screen_settings moves it to the foreground when dimmed. Checked with 215 Python and 14 C++ tests, generate_packages --check, and ESP32 builds of both Easy profiles. Firmware 0.2.48. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2.0 KiB
2.0 KiB
Test results app 0.2.56 / firmware 0.2.48 (2026-09-16)
Max found that the back arrow on the colour card of Studio 1 (firmware 0.2.44) did not respond, while the
card itself kept working. Cause: settings_screen::attach_hold (firmware 0.2.44+) creates the transparent
hold strip for the settings page in on_boot, after the YAML cards on home_page. It therefore lay on top of
them, and LVGL's hit test gave taps in the top bar region (x 32-448, y 0-72 on the Guition) to the strip
instead of the card's back button (x 16-76, y 16-76) or its action at the top right. See CHANGELOG 0.2.56
and the compatibility note in docs/RELEASING.md.
Automated
- Python (
.venv-portal): 215 tests OK.tests/test_settings_page.pyaddstest_the_hold_strip_lies_under_every_card:attach_holdmoves the strip underbelow, both profiles passid(brightness_overlay), it is the first card onhome_page(before colour, climate, climate mode and the dim wake overlay), and the page controls come before it. - C++ (
clang++ -std=c++17 -Wall -Wextra -Werror -I. -I components/smart_display): 14/14 PASS. generate_packages.py --checkgreen.- LVGL 9.5
lv_obj_move_to_indexread in the bundled source: moving the strip and then the fill line to the index ofbrightness_overlayleaves strip < line < every card in the child order, and the hit test searches the last child first.
Builds (ESPHome 2026.6.2)
| Profile | RAM | Flash | vs 0.2.55 |
|---|---|---|---|
| easy-guition-device.yaml | 24.0% (78,732 B) | 18.4% (1,496,815 B) | +0 B RAM, +40 B flash |
| easy-cyd-device.yaml | 23.0% (75,484 B) | 76.1% (1,396,847 B) | +0 B RAM, +48 B flash |
Not tested / for the owner
- Hardware and a real LVGL hit test. Nothing was flashed. Studio 1 updates through Home Assistant. On real glass after the update: the back arrow on the brightness, colour and climate cards, the button at the top right of the climate card, and holding the top bar on a tile page still opens the settings page.