Xandrossian
9857cc3bda
A board file for the Elecrow CrowPanel 7.0" (DIS08070H, ESP32-S3-WROOM-1-N4R8): 800x480 through mipi_rgb, GT911 on the ESP32-S3's USB pins (elecrow_usb_phy.h frees them, behind a flag only this board sets), the Guition's vertical sizes across a wider page, no rotation. Its 4 MB of flash take the CYD's budget: a partition table of the component's (smart_display: partitions: 4mb_wide_slots, 1,984 KB slots), the icon fonts at 2 bits a pixel and the TLS client only bring the firmware to 1,865,440 bytes, 91.8 % of a slot, with camera images kept. docs/ELECROW.md has the numbers and the trade. The add-on reads a large board's name from the type sensor's value, the editor offers the board under New screen and draws the wide preview, tools/check.sh builds it with the budget, render_topbar and capture_ui take the panel's size. Firmware 0.2.79; the CYD image is unchanged (1,633,760 bytes). This fork builds from gittea.trippedonmy.name/Xandrossian/homeassistant_espscreen: the packages, the fonts, the component and the add-on repository point there instead of GitHub.
10 lines
388 B
YAML
10 lines
388 B
YAML
# Manual alternative: add this block to the ESPHome wizard configuration.
|
|
# Remove the old esp32: block; keep your own esphome:, api:, ota: and wifi:.
|
|
# The easy route generates a complete file of its own: ESP Screen Manager.
|
|
packages:
|
|
screen:
|
|
url: https://gittea.trippedonmy.name/Xandrossian/homeassistant_espscreen
|
|
ref: main
|
|
files: [packages/guition.yaml]
|
|
refresh: 0s
|