A tap on the On/off switch of a wide or full-page tile moved the knob to on
and back, and the light stayed off. Since firmware 0.2.59 control_event drew
the new position first (Tile::optimistic writes it into state) and then asked
key_action for the action, which read that new position: an off light got
light.turn_off, an on light light.turn_on. A tap on the tile itself was never
affected.
tile_controls::press_key chooses the action first and then shows the new
position; control_event uses it. Unit tests cover a light, a fan, a sensor
and a cover key.
Checked with tools/check.sh (471 Python tests, 19/19 C++) and compiled for
both boards: CYD 1,677,504 B (91.4 %, +16 B), Guition 2,054,640 B (25.3 %).
On Max's Guition Wallbox (OTA from this branch) every tap on the switch sent
the right action and Home Assistant's logbook followed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Max Gramser
2d343a450f