Xandrossian/homeassistant_espscreen

Fork 0

Files

T

History

Xandrossian 4ec8c7a935

CI / checks (push) Waiting to run

Details

CI / firmware (add-on) (push) Blocked by required conditions

Details

CI / firmware (min_version) (push) Blocked by required conditions

Details

Reset the Elecrow's GT911 the way Elecrow's own V3.0 example does (0.2.96, firmware 0.2.82)

The 2 ms reset of ESPHome's expander support (0.2.81) left the chip silent: "Calibration error" with the PCA9557
answering at 0x18. A component of smart_display's (elecrow_touch_reset.h, setup priority 700: after the I2C bus,
before the GT911 driver) writes the expander as Elecrow's V3.0 ESPHome example does: every pin an output and low,
20 ms, the reset released, 100 ms, the interrupt line back to an input. The driver's reset and interrupt pins are gone.

2026-09-21 13:30:41 -07:00

app

Reset the Elecrow's GT911 the way Elecrow's own V3.0 example does (0.2.96, firmware 0.2.82)

2026-09-21 13:30:41 -07:00

translations

Add the Elecrow CrowPanel 7.0" as a third board, and take the packages and the add-on from Gitea (0.2.93)

2026-09-20 23:18:01 -07:00

CHANGELOG.md

Reset the Elecrow's GT911 the way Elecrow's own V3.0 example does (0.2.96, firmware 0.2.82)

2026-09-21 13:30:41 -07:00

config.yaml

Reset the Elecrow's GT911 the way Elecrow's own V3.0 example does (0.2.96, firmware 0.2.82)

2026-09-21 13:30:41 -07:00

Dockerfile

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

DOCS.md

Bring the guides up to date with the code of the last releases (docs only)

2026-09-19 00:11:40 +02:00

README.md

Add the Elecrow CrowPanel 7.0" as a third board, and take the packages and the add-on from Gitea (0.2.93)

2026-09-20 23:18:01 -07:00

README.md

ESP Screen Manager

Thank you! I work on this project with a lot of love, and every bit of support helps. I truly love the Home Assistant community.

Find your Home Assistant entities, arrange up to 48 tiles, and push changes to a CYD, Guition or Elecrow CrowPanel screen without reflashing. Includes installation help, a unique per-device YAML, and support for multiple screens.

Open the web interface after installation. See Documentation for the first flash. The app uses Home Assistant Ingress and needs no login or token of its own. More screenshots are in the project README.