Xandrossian 4ec8c7a935 Reset the Elecrow's GT911 the way Elecrow's own V3.0 example does (0.2.96, firmware 0.2.82) ...

The 2 ms reset of ESPHome's expander support (0.2.81) left the chip silent: "Calibration error" with the PCA9557
answering at 0x18. A component of smart_display's (elecrow_touch_reset.h, setup priority 700: after the I2C bus,
before the GT911 driver) writes the expander as Elecrow's V3.0 ESPHome example does: every pin an output and low,
20 ms, the reset released, 100 ms, the interrupt line back to an input. The driver's reset and interrupt pins are gone.

2026-09-21 13:30:41 -07:00

..

editor_sources.py

Speak the editor in each person's Home Assistant language: every text in the editor section of en.json, the mockup in the screens' language, and one Language & region card for all screens

2026-09-19 14:48:12 +02:00

screen_text_en.h

Keep the news at the end of a tile's line: a shorter "Yest. 9:15 PM" and a robot's battery that stays

2026-09-19 23:37:10 +02:00

test_action_feedback.cpp

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

test_addon_translations.py

Notation like Home Assistant, each screen in its own language, and the language in every build

2026-09-19 16:52:34 +02:00

test_alert_broadcast.py

Show a live picture on a camera tile, run an action from the alert button, roll long media titles, and keep full-page tiles in their own colour (0.2.91)

2026-09-20 12:47:44 +02:00

test_alert_overlay.cpp

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

test_alert.py

Build every screen from one shared core plus a small file per board, the same firmware as before (0.2.84)

2026-09-18 22:57:14 +02:00

test_alerts_reference.py

Build every screen from one shared core plus a small file per board, the same firmware as before (0.2.84)

2026-09-18 22:57:14 +02:00

test_binary_words.py

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

test_build_env.py

Build the screens with ESPHome 2026.9 and keep its build memory in the app's own storage, give the CYD 94 KB more room, and stop a timer from counting one second too many (0.2.89)

2026-09-19 12:35:49 +02:00

test_calibration_math.cpp

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

test_camera_view.cpp

Show a live picture on a camera tile, run an action from the alert button, roll long media titles, and keep full-page tiles in their own colour (0.2.91)

2026-09-20 12:47:44 +02:00

test_camera.py

Show the album cover on a media tile, in the same strip as the live camera pictures (0.2.92)

2026-09-20 13:46:46 +02:00

test_chunk_transport.cpp

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

test_claude_skill.py

Add Dark mode for a screen beside the bed, with every colour in one table (0.2.63)

2026-09-17 12:07:10 +02:00

test_cover_card.py

Build every screen from one shared core plus a small file per board, the same firmware as before (0.2.84)

2026-09-18 22:57:14 +02:00

test_cyd_ui.cpp

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

test_easy_package.py

Add the Elecrow CrowPanel 7.0" as a third board, and take the packages and the add-on from Gitea (0.2.93)

2026-09-20 23:18:01 -07:00

test_editor_live.py

Show a live picture on a camera tile, run an action from the alert button, roll long media titles, and keep full-page tiles in their own colour (0.2.91)

2026-09-20 12:47:44 +02:00

test_editor_startup.py

Speak the editor in each person's Home Assistant language: every text in the editor section of en.json, the mockup in the screens' language, and one Language & region card for all screens

2026-09-19 14:48:12 +02:00

test_effects_page.cpp

Notation like Home Assistant, each screen in its own language, and the language in every build

2026-09-19 16:52:34 +02:00

test_elecrow.py

Reset the Elecrow's GT911 the way Elecrow's own V3.0 example does (0.2.96, firmware 0.2.82)

2026-09-21 13:30:41 -07:00

test_extended.py

Fix what a full test round of today's releases found: a ticking single clock, a switch that works in standby, no taps from a swipe (0.2.78)

2026-09-18 17:25:23 +02:00

test_firmware_download.py

Fix what a full test round of today's releases found: a ticking single clock, a switch that works in standby, no taps from a swipe (0.2.78)

2026-09-18 17:25:23 +02:00

test_full_page_tiles.py

Fix what a full test round of today's releases found: a ticking single clock, a switch that works in standby, no taps from a swipe (0.2.78)

2026-09-18 17:25:23 +02:00

test_guition.py

Build every screen from one shared core plus a small file per board, the same firmware as before (0.2.84)

2026-09-18 22:57:14 +02:00

test_ha_capabilities.py

Take what a tile can do, its tap actions, words and icons from Home Assistant (0.2.67)

2026-09-17 15:41:38 +02:00

test_ha_icons.py

Take what a tile can do, its tap actions, words and icons from Home Assistant (0.2.67)

2026-09-17 15:41:38 +02:00

test_header_bar.cpp

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

test_header_bar.py

Write the sun's and the forecast's times, and the top bar's, for the screens' 12 or 24-hour clock

2026-09-19 15:11:14 +02:00

test_history_card.py

Speak the app's own texts from the translations: its messages and labels in the editor's language, the words it sends the screens in theirs

2026-09-19 15:06:12 +02:00

test_history_view.cpp

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

test_known_firmware.py

Fix what a full test round of today's releases found: a ticking single clock, a switch that works in standby, no taps from a swipe (0.2.78)

2026-09-18 17:25:23 +02:00

test_language_region.py

Give firmware from before the languages Home Assistant's English words, not the screens' new language

2026-09-19 20:02:17 +02:00

test_layer_free.py

Build every screen from one shared core plus a small file per board, the same firmware as before (0.2.84)

2026-09-18 22:57:14 +02:00

test_layout.py

Build every screen from one shared core plus a small file per board, the same firmware as before (0.2.84)

2026-09-18 22:57:14 +02:00

test_light_controls.cpp

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

test_light_effects.py

Give a lamp's modes a page: the effects, palettes, presets, speed and intensity of a WLED behind its colour card, with a drum picker and the effect's name on the tile (0.2.83)

2026-09-18 21:38:20 +02:00

test_media_card.cpp

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

test_media_card.py

Show a live picture on a camera tile, run an action from the alert button, roll long media titles, and keep full-page tiles in their own colour (0.2.91)

2026-09-20 12:47:44 +02:00

test_off_look.py

Grey out what Home Assistant calls off and colour the rest like Home Assistant, so an airco that is off no longer looks on (0.2.85)

2026-09-18 23:31:10 +02:00

test_onboarding.py

Free memory on the CYD and drop the old manual profile (0.2.50)

2026-09-16 08:06:41 +02:00

test_overrides.py

Fix what a full test round of today's releases found: a ticking single clock, a switch that works in standby, no taps from a swipe (0.2.78)

2026-09-18 17:25:23 +02:00

test_page_assets.py

Fix what a full test round of today's releases found: a ticking single clock, a switch that works in standby, no taps from a swipe (0.2.78)

2026-09-18 17:25:23 +02:00

test_page_tile_copies.py

Fix what a full test round of today's releases found: a ticking single clock, a switch that works in standby, no taps from a swipe (0.2.78)

2026-09-18 17:25:23 +02:00

test_portal.py

Notation like Home Assistant, each screen in its own language, and the language in every build

2026-09-19 16:52:34 +02:00

test_positions.py

Fix what a full test round of today's releases found: a ticking single clock, a switch that works in standby, no taps from a swipe (0.2.78)

2026-09-18 17:25:23 +02:00

test_quiet_resync.py

Build every screen from one shared core plus a small file per board, the same firmware as before (0.2.84)

2026-09-18 22:57:14 +02:00

test_release_lint.py

Add the Elecrow CrowPanel 7.0" as a third board, and take the packages and the add-on from Gitea (0.2.93)

2026-09-20 23:18:01 -07:00

test_renamed_inbox.py

Put ESP Screens in English and keep layouts when entity IDs change (0.2.40)

2026-09-15 02:08:43 +02:00

test_rich_cards.py

Fix what a full test round of today's releases found: a ticking single clock, a switch that works in standby, no taps from a swipe (0.2.78)

2026-09-18 17:25:23 +02:00

test_rotation.py

Fix what a full test round of today's releases found: a ticking single clock, a switch that works in standby, no taps from a swipe (0.2.78)

2026-09-18 17:25:23 +02:00

test_runtime_model.cpp

Show a live picture on a camera tile, run an action from the alert button, roll long media titles, and keep full-page tiles in their own colour (0.2.91)

2026-09-20 12:47:44 +02:00

test_save_limits.py

Fix what a full test round of today's releases found: a ticking single clock, a switch that works in standby, no taps from a swipe (0.2.78)

2026-09-18 17:25:23 +02:00

test_scaling.py

Put ESP Screens in English and keep layouts when entity IDs change (0.2.40)

2026-09-15 02:08:43 +02:00

test_screen_owned_settings.py

Speak the editor in each person's Home Assistant language: every text in the editor section of en.json, the mockup in the screens' language, and one Language & region card for all screens

2026-09-19 14:48:12 +02:00

test_screen_settings.cpp

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

test_screen_text.cpp

Notation like Home Assistant, each screen in its own language, and the language in every build

2026-09-19 16:52:34 +02:00

test_settings_page.py

Build every screen from one shared core plus a small file per board, the same firmware as before (0.2.84)

2026-09-18 22:57:14 +02:00

test_settings_screen.cpp

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

test_settings_view.py

Release 0.2.73: the Vue editor with live values, Identify, a test alert, layout copying and ⌘K

2026-09-18 08:32:08 +02:00

test_shutdown.py

Fix what a full test round of today's releases found: a ticking single clock, a switch that works in standby, no taps from a swipe (0.2.78)

2026-09-18 17:25:23 +02:00

test_state_colours.py

Show a live picture on a camera tile, run an action from the alert button, roll long media titles, and keep full-page tiles in their own colour (0.2.91)

2026-09-20 12:47:44 +02:00

test_state_words.py

Speak the app's own texts from the translations: its messages and labels in the editor's language, the words it sends the screens in theirs

2026-09-19 15:06:12 +02:00

test_tap_actions.py

Speak the editor in each person's Home Assistant language: every text in the editor section of en.json, the mockup in the screens' language, and one Language & region card for all screens

2026-09-19 14:48:12 +02:00

test_theme.cpp

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

test_theme.py

Speak the editor in each person's Home Assistant language: every text in the editor section of en.json, the mockup in the screens' language, and one Language & region card for all screens

2026-09-19 14:48:12 +02:00

test_tile_controls.cpp

Climate fan and swing settings in Home Assistant's words

2026-09-19 20:17:32 +02:00

test_tile_controls.py

Build every screen from one shared core plus a small file per board, the same firmware as before (0.2.84)

2026-09-18 22:57:14 +02:00

test_tile_events.py

Forty-eight tiles, a tile over the whole page and tiles that go to a page (0.2.74)

2026-09-18 08:44:44 +02:00

test_tile_icon.cpp

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

test_tile_icons.py

Build every screen from one shared core plus a small file per board, the same firmware as before (0.2.84)

2026-09-18 22:57:14 +02:00

test_tile_palette.cpp

Build each screen in one language: the screen texts from the translations, European letters in the fonts, and Language & region in the app

2026-09-19 14:24:19 +02:00

test_tile_palette.py

Fix what a full test round of today's releases found: a ticking single clock, a switch that works in standby, no taps from a swipe (0.2.78)

2026-09-18 17:25:23 +02:00

test_touch_filter.cpp

Add stable CYD firmware, USB calibration wizard and complete setup guide

2026-09-12 10:18:49 +02:00

test_twenty_tiles.py

Fix what a full test round of today's releases found: a ticking single clock, a switch that works in standby, no taps from a swipe (0.2.78)

2026-09-18 17:25:23 +02:00

test_updates.py

Let the screen list see the Screen language sensor, so a language update is confirmed and not offered again

2026-09-19 16:08:01 +02:00

test_vacuum_card.py

Choose vacuum, vac & mop or mop on the vacuum card, and a climate card for the CYD (0.2.46)

2026-09-15 15:22:28 +02:00

test_wake_sleep.py

Build every screen from one shared core plus a small file per board, the same firmware as before (0.2.84)

2026-09-18 22:57:14 +02:00

test_wifi_reuse.py

One-window install: profile, wifi, USB flash and pairing hints (0.2.27)

2026-09-14 11:11:23 +02:00