Max Gramser dffd6a90c6 Let Home Assistant automations switch Auto standby per screen, and teach the skill (0.2.48) ...

App 0.2.48 / firmware 0.2.41:
- Both boards expose the switch "Auto standby", the same standby_enabled setting as the checkbox
  in ESP Screens. Off wakes a dimmed screen and keeps it on; on counts the standby time from that
  moment. The change is saved on the screen and reported through esphome.screen_setting, so ESP
  Screens stores it too. No action runs at boot (restore_mode DISABLED).
- The Claude skill gains "Standby and brightness": the switch, Standby after and the three
  brightness numbers, with an example automation that keeps screens awake while someone is home
  and a light is on or a window is open.
- EASY_SETUP and the README describe the entities and the automation.

Tested through Home Assistant's API on both bench boards (CYD: dimmed -> off wakes in 1.1 s, stays
bright past the standby time, on dims again after 61 s); see docs/TEST_RESULTS_0248.md, which also
records a CYD rollback after the first OTA that points to memory headroom, not to this change.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

2026-09-15 18:06:04 +02:00

..

images

Bring the big climate card to the Guition, with fan and swing on their own card (0.2.47)

2026-09-15 15:55:48 +02:00

ACCEPTANCE.md

Put ESP Screens in English and keep layouts when entity IDs change (0.2.40)

2026-09-15 02:08:43 +02:00

CALIBRATING.md

Put ESP Screens in English and keep layouts when entity IDs change (0.2.40)

2026-09-15 02:08:43 +02:00

CYD_UPGRADE_027.md

Put ESP Screens in English and keep layouts when entity IDs change (0.2.40)

2026-09-15 02:08:43 +02:00

EASY_SETUP.md

Let Home Assistant automations switch Auto standby per screen, and teach the skill (0.2.48)

2026-09-15 18:06:04 +02:00

GUITION_FACTORY_REFERENCE.md

Put ESP Screens in English and keep layouts when entity IDs change (0.2.40)

2026-09-15 02:08:43 +02:00

GUITION_TESTRESULTATEN.md

Add Guition 480x480 wallbox UI with GT911 and stable RGB rendering

2026-09-12 10:52:59 +02:00

GUITION.md

Put ESP Screens in English and keep layouts when entity IDs change (0.2.40)

2026-09-15 02:08:43 +02:00

LICHTREGELAARS_TESTRESULTATEN.md

Use shared light sliders on Guition and record hardware acceptance

2026-09-12 11:18:22 +02:00

RELEASING.md

Let Home Assistant automations switch Auto standby per screen, and teach the skill (0.2.48)

2026-09-15 18:06:04 +02:00

SETTINGS_TESTRESULTATEN.md

Add persistent per-screen brightness, standby and clock settings

2026-09-12 13:31:18 +02:00

SWIPE_PROFILE.md

Make page swipes smooth and give lights a new colour card (0.2.42)

2026-09-15 10:59:02 +02:00

TEST_RESULTS_021.md

Document verified Home Assistant CLI installation and UI acceptance

2026-09-12 16:36:35 +02:00

TEST_RESULTS_022.md

Close runtime detail menus when standby returns to page one

2026-09-12 16:42:05 +02:00

TEST_RESULTS_023.md

Use Home Assistant domain colors and improve tile contrast

2026-09-12 16:53:02 +02:00

TEST_RESULTS_024.md

Document visual picker workflow and HA update acceptance

2026-09-12 17:06:59 +02:00

TEST_RESULTS_025.md

Show actual vacuum state when opening its detail card

2026-09-12 17:12:44 +02:00

TEST_RESULTS_026.md

Document verified ESPHome wifi reuse on Home Assistant

2026-09-12 17:22:08 +02:00

TEST_RESULTS_027.md

Verify all runtime pages and document twenty-tile swipe acceptance

2026-09-12 17:36:48 +02:00

TEST_RESULTS_028.md

Fix compact tile text bounds and mini slider spacing

2026-09-12 18:15:26 +02:00

TEST_RESULTS_029.md

Record production rotation and remote package verification

2026-09-12 18:37:03 +02:00

TEST_RESULTS_0210.md

Record pastel production checks and configuration preservation

2026-09-12 19:04:38 +02:00

TEST_RESULTS_0212.md

Fix switch confirmation and details; retain compact slider icons

2026-09-13 00:47:49 +02:00

TEST_RESULTS_0213.md

Refine large-value tiles and fade Guition backlight in hardware

2026-09-13 01:14:39 +02:00

TEST_RESULTS_0214.md

Add clock, forecast, graph, sun, timer and person cards with wide tiles

2026-09-13 02:09:50 +02:00

TEST_RESULTS_0215.md

Open tile settings in a sheet above the mockup and remove tiles in place

2026-09-13 09:17:34 +02:00

TEST_RESULTS_0216.md

Calendar analog clock with ticks and numerals; tiles without background

2026-09-13 09:52:33 +02:00

TEST_RESULTS_0217.md

Fix nightly-update checkbox layout and hide the updates block until loaded

2026-09-13 10:33:54 +02:00

TEST_RESULTS_0218.md

Custom icon per tile: 150 MDI icons in firmware and editor

2026-09-13 11:16:57 +02:00

TEST_RESULTS_0223.md

Direct controls on wide cards, weather/climate cards, spinner busy state (0.2.23)

2026-09-13 15:02:15 +02:00

TEST_RESULTS_0224.md

Rapid -/+ taps and hold-to-repeat on the setpoint pill (0.2.25)

2026-09-13 15:20:38 +02:00

TEST_RESULTS_0227.md

One-window install: profile, wifi, USB flash and pairing hints (0.2.27)

2026-09-14 11:11:23 +02:00

TEST_RESULTS_0228.md

Let a tap survive a centimetre of finger drift and log every refused tap (0.2.28)

2026-09-14 11:30:23 +02:00

TEST_RESULTS_0229.md

Swipe in from the side edge to change pages on the Guition (0.2.29)

2026-09-14 11:40:19 +02:00

TEST_RESULTS_0230.md

Show a green dot for online screens in the screen list (0.2.30)

2026-09-14 11:50:56 +02:00

TEST_RESULTS_0231.md

Free drag & drop with fixed positions, empty cells and kept pages (0.2.31)

2026-09-14 13:00:39 +02:00

TEST_RESULTS_0232.md

Close cards through one path so the page swipe is never left blocked (0.2.32)

2026-09-14 13:09:53 +02:00

TEST_RESULTS_0233.md

Let LVGL decide a tap on the Guition: release inside the tile counts (0.2.33)

2026-09-14 13:15:09 +02:00

TEST_RESULTS_0234.md

Feed the edge swipe from the touchscreen triggers again (0.2.34)

2026-09-14 13:40:36 +02:00

TEST_RESULTS_0235.md

Keep the empty edge band out of LVGL so a quick swipe gets its samples (0.2.35)

2026-09-14 14:02:47 +02:00

TEST_RESULTS_0236.md

Show an alert from a Home Assistant automation (0.2.36)

2026-09-14 14:39:03 +02:00

TEST_RESULTS_0237.md

Add the Alerts cheatsheet to ESP Screens (0.2.37)

2026-09-14 15:08:40 +02:00

TEST_RESULTS_0238.md

Let every screen choose its top bar: clocks, date and entities (0.2.38)

2026-09-14 18:38:49 +02:00

TEST_RESULTS_0239.md

Make daily traffic scale to dozens of screens: incremental sync, ping keepalive, one action per message (0.2.39)

2026-09-14 21:06:45 +02:00

TEST_RESULTS_0240.md

Put ESP Screens in English and keep layouts when entity IDs change (0.2.40)

2026-09-15 02:08:43 +02:00

TEST_RESULTS_0241.md

Show the screens and ESP Screens in the README; firmware 0.2.35 to test updates (0.2.41)

2026-09-15 08:08:38 +02:00

TEST_RESULTS_0242.md

Make page swipes smooth and give lights a new colour card (0.2.42)

2026-09-15 10:59:02 +02:00

TEST_RESULTS_0245.md

Send one alert to every screen, teach Claude about ESP Screens, and add a Settings page (0.2.45)

2026-09-15 14:52:27 +02:00

TEST_RESULTS_0246.md

Choose vacuum, vac & mop or mop on the vacuum card, and a climate card for the CYD (0.2.46)

2026-09-15 15:22:28 +02:00

TEST_RESULTS_0247.md

Bring the big climate card to the Guition, with fan and swing on their own card (0.2.47)

2026-09-15 15:55:48 +02:00

TEST_RESULTS_0248.md

Let Home Assistant automations switch Auto standby per screen, and teach the skill (0.2.48)

2026-09-15 18:06:04 +02:00

TILES.md

Put ESP Screens in English and keep layouts when entity IDs change (0.2.40)

2026-09-15 02:08:43 +02:00

TROUBLESHOOTING.md

Put ESP Screens in English and keep layouts when entity IDs change (0.2.40)

2026-09-15 02:08:43 +02:00

WHATS_NEW_020.md

Document verified Home Assistant CLI installation and UI acceptance

2026-09-12 16:36:35 +02:00