Show the screens and ESP Screens as they are now in the README pictures (docs only)

Rendered again from firmware 0.2.71 and the editor of 0.2.85 on the demo homes, with the render tooling
brought over to the core and board files of 0.2.84: the tile pages with 0.2.85's colours (a running timer
amber, a docked robot and idle scripts grey, the full-page speaker lit while it plays), the cards with the
icon edges of 0.2.75, and the editor with 48 tiles, the icon-left tiles of 0.2.76, Size and Page in the
tile drawer, Perform action on the curtains as the caption says, and every Screen settings row. The camera
pictures show a free Unsplash photo by Virginia Marinova, credited in the README. The two photos at the top
carry the current firmware on their screen: the page with scenes, scripts, the robot and the table lamp,
and the vacuum card with its cleaning mode.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

README.md

@@ -6,7 +6,7 @@ Thank you! I work on this project with a lot of love, and every bit of support h
 
 <p align="center">
   <img src="docs/images/photo-guition-page-2.jpg" width="49%" alt="The Guition 4-inch screen on a table: the second page with scenes and scripts, the robot vacuum and a table lamp with a brightness slider">
-  <img src="docs/images/photo-guition-vacuum.jpg" width="49%" alt="The vacuum card on the Guition: start cleaning, return to dock, find my robot and the suction power">
+  <img src="docs/images/photo-guition-vacuum.jpg" width="49%" alt="The vacuum card on the Guition: docked and charging, start cleaning and dock, the cleaning mode, suction and water">
 </p>
 
 **A touch screen for every room that you lay out yourself, and manage from Home Assistant.**
@@ -108,7 +108,7 @@ also be changed on the screen or by an automation, and your own YAML for one scr
 </p>
 <p align="center"><sub>A top bar built from your own home, firmware updates over Wi-Fi (every night if you like), and a skill so Claude can rearrange your screens.</sub></p>
 <p align="center">
-  <img src="docs/images/editor-screen-settings.png" width="98%" alt="The Screen settings tab in ESP Screens: Brightness with standby, Night with its hours and brightness, and Screen with the clock, back to page 1, swiping and the rotation">
+  <img src="docs/images/editor-screen-settings.png" width="98%" alt="The Screen settings tab in ESP Screens: Brightness with Dark mode and standby, Night with its hours and brightness, and Screen with the clock, back to page 1, swiping, the page buttons and the rotation">
 </p>
 <p align="center"><sub>Screen settings apply at once, and a change made on the screen or by an automation shows up here too.</sub></p>
 <p align="center">
@@ -225,4 +225,7 @@ The very first version started from Adrian Kuehlewind's
 Little of that code is left, but his repository has 3D-printable desk, under-desk, wall and flush
 mounts for the CYD.
 
+The front door in the camera pictures is a photo by
+[Virginia Marinova](https://unsplash.com/photos/the-door-welcomes-with-plants-on-both-sides-80uwJgdeqWg) on Unsplash.
+
 ESP Screens is MIT licensed, see [LICENSE](LICENSE).

README_EXTENDED.md

@@ -428,7 +428,7 @@ takes effect at once, and appears in ESP Screens within a second, so both sides
 the same value. The **Screen settings** cards in ESP Screens have the same rows.
 
 <p align="center">
-  <img src="docs/images/editor-screen-settings.png" width="98%" alt="Screen settings in ESP Screens: Brightness with Dark mode and standby, Night with its hours and brightness, and Screen with the clock, back to page 1, swiping and the rotation">
+  <img src="docs/images/editor-screen-settings.png" width="98%" alt="Screen settings in ESP Screens: Brightness with Dark mode and standby, Night with its hours and brightness, and Screen with the clock, back to page 1, swiping, the page buttons and the rotation">
 </p>
 
 **In Home Assistant** (firmware 0.2.49+), every setting is an entity on the screen's device, under