Rendered again from firmware 0.2.71 and the editor of 0.2.85 on the demo homes, with the render tooling
brought over to the core and board files of 0.2.84: the tile pages with 0.2.85's colours (a running timer
amber, a docked robot and idle scripts grey, the full-page speaker lit while it plays), the cards with the
icon edges of 0.2.75, and the editor with 48 tiles, the icon-left tiles of 0.2.76, Size and Page in the
tile drawer, Perform action on the curtains as the caption says, and every Screen settings row. The camera
pictures show a free Unsplash photo by Virginia Marinova, credited in the README. The two photos at the top
carry the current firmware on their screen: the page with scenes, scripts, the robot and the table lamp,
and the vacuum card with its cleaning mode.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The README pictures now match the released screens and ESP Screens: the light pages had the sliders
and clock from before 0.2.43, the editor showed firmware 0.2.34, and the vacuum and climate cards
carried Dutch names. New pictures show the settings page on the screen with Dark mode, the Screen
settings cards, Perform action in the tile settings and Override YAML; the full reference gets the
same and short notes on tap actions, Home Assistant's words and icons, and Override YAML.
Rendered from the host firmware and the real add-on on the demo home, like the earlier pictures.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
App 0.2.46 / firmware 0.2.39:
- The vacuum's state message carries extras from its own device: the cleaning mode and water
selects (found by translation key, then entity id ending, so localized ids work), the suction
speeds to offer, the battery sensor (HA 2026.8 dropped battery_level), charging and the current
room. Speeds and water levels a mode covers move into the mode row; Custom only while in use.
The manager watches these entities and resends only the vacuum's message when one changes.
- Vacuum card redesign on both boards: robot with state, battery, charging bolt and room; Start
(Pause, Resume) and Dock; then segmented rows for mode, suction and water, showing only the rows
the chosen mode uses. Taps show at once and wait for Home Assistant; Locate is a round button in
the Guition hero.
- CYD climate card without the arc: big setpoint between large -/+ keys (debounced, hold to
repeat) and one row of mode keys in HA's order and colours, with a more key for fan and swing.
- Both profiles clear climate_edit_pending when the climate card is closed, instead of running
ui_refresh every second while the flag stayed set.
Tested with the owner's Roborock S8 on HA 2026.9.1 (live data, OTA-flashed bench boards) and with
host renders of both boards; see docs/TEST_RESULTS_0246.md.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Max Gramser
