Max Gramser
87b2082f81
Since firmware 0.2.42 a slider showed the tile's colour only while Tile::active() held, which is never true for a playing, paused or idle media player, a cover or a number, so their volume, position and value sliders stayed grey like a light that is off. Tile::slider_active() follows Home Assistant's tile sliders instead: grey for an unavailable entity, a light or fan that is off and a media player that is off or in standby; a closed cover keeps its colour as in HA's cover position feature, and a number with a value is active. The sliders of direct controls on wide tiles and the small sliders use it; Tile::active() and its other uses are unchanged. Checked with 282 Python and 15 C++ tests, generate_packages --check, ESP32 builds of both check profiles and host renders of both boards. Firmware 0.2.52. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
51 lines
3.4 KiB
Markdown
51 lines
3.4 KiB
Markdown
# Test results app 0.2.60 / firmware 0.2.52 (2026-09-17)
|
|
|
|
Max saw grey sliders for a playing media player's volume and an open cover's position. Since 0.2.42 (a grey slider
|
|
end for a light that is off) a slider showed the tile's colour only while `Tile::active()` held, and that rule knows
|
|
`on`, `cleaning`, `active`, home, above the horizon and climate not off: never `playing` or `open`, and never a number.
|
|
Home Assistant colours tile sliders by `stateActive()` (frontend `src/common/entity/state_active.ts`, read on GitHub):
|
|
a media player is active unless off or standby, a cover unless closed, and its cover position feature keeps the open
|
|
colour for a closed cover so the slider does not look disabled. Every caller of `active()` was checked (the grey circle
|
|
of switches, people and timers, a light's own colour, the palette cache, both sliders, and `was_on` of the value
|
|
overlay in both profiles, which covers and media players no longer reach; the top bar and cards don't use it).
|
|
Widening `active()` would only have changed slider colours, but the closed cover needs a slider rule anyway, so the fix
|
|
is a separate `Tile::slider_active()` and `active()` stays as it was. See CHANGELOG 0.2.60 and docs/RELEASING.md.
|
|
|
|
## Automated
|
|
|
|
- C++ (`clang++ -std=c++17 -Wall -Wextra -Werror -I. -I components/smart_display`): 15/15 PASS, on HEAD plus only this
|
|
change in a separate worktree. `test_runtime_model` adds `test_slider_colours`: a light and a fan on and off; a media
|
|
player playing, paused, idle, buffering and on (coloured) against off, standby, unavailable and unknown (grey); a cover
|
|
open, opening, closing and closed (coloured) against unavailable; a number and an input_number with a value against
|
|
unknown; a tile that has received nothing. The test fails on the old rule (compiled against
|
|
`slider_active() { return active(); }`).
|
|
- Python (`.venv-portal`): 282 tests OK in that worktree, with the version bump. `generate_packages.py --check` green.
|
|
|
|
## Builds (ESPHome 2026.6.2)
|
|
|
|
ESP32 check profiles with the generated packages and local components. They were built from the shared working tree,
|
|
which also held other sessions' unfinished edits; the version bump alone was not built again.
|
|
|
|
| Profile | RAM | Flash |
|
|
|---|---|---|
|
|
| CYD | 23.5% (77,060 B) | 77.8% (1,427,919 B) |
|
|
| Guition | 24.5% (80,436 B) | 18.8% (1,531,471 B) |
|
|
|
|
RAM is the same as in 0.2.59.
|
|
|
|
## Firmware on the Mac (host builds)
|
|
|
|
Guition and CYD host builds with a demo home that runs the real manager, on three pages: a playing Sonos (volume), an
|
|
open blind (position) and a boiler setpoint (slider) on double-width tiles; a radio in standby, a closed blind and a
|
|
paused speaker; small sliders for an idle speaker, a TV that is off, an open blind, a number, a lamp that is on and a
|
|
hallway light that is off. Playing, paused and idle players show blue, blinds purple (the closed one as the short end
|
|
at 0 %), numbers teal and the lamp amber; the radio in standby and the TV stay grey, and the light that is off shows
|
|
its empty grey track as before. No compiler warnings from the smart_display headers.
|
|
|
|
## Not tested / for the owner
|
|
|
|
- Real hardware: nothing was flashed. After updating a screen, a playing speaker's volume slider and an open blind's
|
|
position slider are coloured, and the speaker's slider turns grey in standby.
|
|
- A media player that is off or in standby still shows its grey fill with the handle; Home Assistant hides the handle
|
|
there. Left as it is.
|