Files
homeassistant_espscreen/components/smart_display/cyd_ui.h
T
Max Gramser b9e1dfbd95 Close cards through one path so the page swipe is never left blocked (0.2.32)
Read live on a Guition: every edge swipe was recognised but refused by the
"card open" check, because the light, climate and vacuum cards cleared
their overlay on close (X, tap beside the card, wake from standby) without
forgetting active_entity. One opened card blocked swiping until the next
layout change; the old whole-screen gesture and the CYD had the same gate.
Both boards now close cards through one script, close_cards, which hides
every overlay and clears that state; wake_display uses it too.

The Guition edge swipe now follows LVGL's own pointer events
(lv_indev_add_event_cb: PRESSED begins, PRESSING flips the page and calls
lv_indev_wait_release from inside LVGL) instead of ESPHome's touchscreen
on_update, so the point arrives already rotated. The direction rule is 45
degrees instead of twice as horizontal, and the log now says why a swipe
was refused or how far an unfinished one got. Firmware 0.2.27 for both
boards; the app only moves its target version.

Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
2026-09-14 13:09:53 +02:00

170 lines
6.9 KiB
C++

#pragma once
#include <algorithm>
#include <cmath>
#include <cstdint>
#include <string>
namespace cyd {
// The n-th quoted item of a JSON list such as ["auto","low","high"]; empty when absent.
inline std::string list_item(const std::string &json, unsigned index) {
size_t pos = 0; unsigned n = 0;
while ((pos = json.find('"', pos)) != std::string::npos) {
size_t end = json.find('"', pos + 1);
if (end == std::string::npos) return {};
if (n++ == index) return json.substr(pos + 1, end - pos - 1);
pos = end + 1;
}
return {};
}
// Work in tenths of a degree and always clamp AFTER rounding.
inline int quantize_temperature(int value, int minimum, int maximum, int step) {
step = std::max(1, step);
value = std::clamp(value, minimum, maximum);
const int snapped = minimum + static_cast<int>(std::lround(
static_cast<double>(value - minimum) / step)) * step;
return std::clamp(snapped, minimum, maximum);
}
class TouchGuard {
public:
enum Reject { NONE, MOVED, TOO_SHORT, USED, BOUNCE };
// Board tuning, set from the profile on boot: how far the finger may drift (pixels, about
// one centimetre) before a tap is dropped, and the shortest contact that counts. A resistive
// panel (CYD) bounces on landing and lift-off; a capacitive one (Guition) does not.
void configure(int move_limit_px, uint32_t min_press_ms) {
move_limit_ = move_limit_px;
min_press_ = min_press_ms;
}
int move_limit() const { return move_limit_; }
uint32_t min_press() const { return min_press_; }
void begin(uint32_t now, int x = 0, int y = 0, int contact = 0) {
started_ = now;
accepted_ = false;
moved_ = false;
contact_ = contact;
samples_ = 1;
sum_x_ = anchor_x_ = x;
sum_y_ = anchor_y_ = y;
distance_ = 0;
reject_ = NONE;
}
int contact() const { return contact_; }
// Follows only the contact that started this touch: a second finger elsewhere is no movement.
// The reference point settles over the first samples, because a finger flattens as it lands;
// a tap is dropped once the finger is farther than the limit from that point.
void update(int x, int y, int contact = 0) {
if (contact != contact_) return;
if (samples_ < SETTLE_SAMPLES) {
++samples_;
sum_x_ += x;
sum_y_ += y;
anchor_x_ = sum_x_ / samples_;
anchor_y_ = sum_y_ / samples_;
}
const long dx = x - anchor_x_, dy = y - anchor_y_;
const int distance = static_cast<int>(std::lround(std::sqrt(static_cast<double>(dx * dx + dy * dy))));
distance_ = std::max(distance_, distance);
if (distance > move_limit_) moved_ = true;
}
int distance() const { return distance_; }
void consume() { accepted_ = true; moved_ = true; }
bool accept(uint32_t now, int tile) {
if (moved_) { reject_ = MOVED; return false; }
return accept_slider(now, tile);
}
// For -/+ keys: every clean tap counts, even the third within a second, so a
// setpoint moves several steps in one go. Only bounce (same key within `gap`) is dropped.
bool accept_repeat(uint32_t now, int tile, uint32_t gap = 150) {
if (moved_) { reject_ = MOVED; return false; }
if (accepted_) { reject_ = USED; return false; }
if (!long_enough(now, std::min<uint32_t>(min_press_, 40))) return false;
if (has_previous_ && tile == previous_tile_ && now - previous_ < gap) { reject_ = BOUNCE; return false; }
remember(now, tile);
return true;
}
// Only for a slider which captured this contact and did not lose the press.
// Consume the gesture so its parent can never also turn it into a tile tap.
bool accept_slider(uint32_t now, int tile) {
if (accepted_) { reject_ = USED; return false; }
if (!long_enough(now, min_press_)) return false;
if (has_previous_ && tile == previous_tile_ && now - previous_ < 600) { reject_ = BOUNCE; return false; }
remember(now, tile);
return true;
}
// Why the last accept() refused, for the touch log; empty after a success.
std::string reason() const {
switch (reject_) {
case MOVED: return "verplaatst " + std::to_string(distance_) + " px (grens " + std::to_string(move_limit_) + ")";
case TOO_SHORT: return "te kort (" + std::to_string(duration_) + " ms, minimaal " + std::to_string(min_press_) + ")";
case USED: return "al verwerkt in dit contact";
case BOUNCE: return "dezelfde knop binnen de dendertijd";
default: return "";
}
}
private:
static constexpr int SETTLE_SAMPLES = 4;
bool long_enough(uint32_t now, uint32_t minimum) {
duration_ = now - started_;
if (duration_ < minimum) { reject_ = TOO_SHORT; return false; }
return true;
}
void remember(uint32_t now, int tile) {
accepted_ = true;
has_previous_ = true;
previous_tile_ = tile;
previous_ = now;
reject_ = NONE;
}
int move_limit_{18};
uint32_t min_press_{60};
uint32_t started_{0}, previous_{0}, duration_{0};
int previous_tile_{-1};
int contact_{0}, samples_{1};
long sum_x_{0}, sum_y_{0};
int anchor_x_{0}, anchor_y_{0}, distance_{0};
bool moved_{false};
bool accepted_{false}, has_previous_{false};
Reject reject_{NONE};
};
inline TouchGuard touch_guard;
// Page navigation by swiping in from a side edge (Guition, firmware 0.2.24+). Fed from
// LVGL's own pointer events (PRESSED/PRESSING), so the coordinates are already rotated the
// way the user sees the screen. A touch that starts within `band` pixels of the left or
// right edge and travels `travel` pixels inward, more sideways than up or down, flips one
// page: from the right edge leftwards is "next", from the left edge rightwards "previous".
// No speed requirement; a touch that starts in the middle never counts, so tapping and
// dragging on tiles cannot change the page by accident.
class EdgeSwipe {
public:
void configure(int band, int travel) { band_ = band; travel_ = travel; }
// `width` is the screen width as the user sees it (LVGL's horizontal resolution).
void begin(int x, int y, int width) {
start_x_ = x; start_y_ = y;
from_ = x < band_ ? 1 : x >= width - band_ ? -1 : 0; // 1: left edge, -1: right edge
done_ = false;
inward_ = sideways_ = 0;
}
bool armed() const { return from_ != 0 && !done_; }
// +1 next page, -1 previous page, 0 nothing; fires at most once per touch.
int update(int x, int y) {
if (!armed()) return 0;
const int dx = x - start_x_, dy = y - start_y_;
const int inward = from_ == 1 ? dx : -dx;
inward_ = std::max(inward_, inward);
sideways_ = std::max(sideways_, std::abs(dy));
if (inward < travel_ || std::abs(dx) < std::abs(dy)) return 0;
done_ = true;
return from_ == 1 ? -1 : 1;
}
// How far the finger got, for the log when an edge touch ends without a page flip.
int inward() const { return inward_; }
int sideways() const { return sideways_; }
private:
int band_{32}, travel_{40};
int start_x_{0}, start_y_{0}, from_{0}, inward_{0}, sideways_{0};
bool done_{true};
};
inline EdgeSwipe edge_swipe;
} // namespace cyd